Loncin RE250 6 speed

**JerryHawk250** · 04-12-2017, 03:25 PM

I found a good replacement engine for our China bikes. Loncin RE250 6 Speed Not bad for around $530. 6 speed and counter balance

I wish these bikes would of came with this engine. Sure would be nice to have 6 speeds. I figured I would post this just in case someone was in need of an engine. Hell might just get one to do it.

dubbya1986 · 04-12-2017, 03:29 PM

Wonder if they will bolt right up without any modifications? That is a great price considering the extra gear and being counterbalanced.

2LZ · 04-12-2017, 03:33 PM

It's OHC too!
I think this is the motor that Fastdoc once put in an XR200. Not sure if it was a six speed though.

**JerryHawk250** · 04-12-2017, 03:33 PM

Quote:

Originally Posted by dubbya1986

Wonder if they will bolt right up without any modifications? That is a great price considering the extra gear and being counterbalanced.

I think the modifications would be minimal. Maybe just mounting brackets. It comes with carb and electronics too. ANd bottle of fish oil

**JerryHawk250** · 04-12-2017, 04:14 PM

Engine type
Single cylinder, 4 stroke, oil-cooled
Displacement
223.0cc
Bore x stroke
65.5×66.2mm
Compression ratio
9.2:1
Maximum power
17.7hp（13.2kw）/8500rpm
Maximum torque
17.2N.m/6000rpm
Starting method
Electric
Ignition system
C.D.I
Idle speed
1300 rpm
Engine oil capacity
1.3 L

Transmission
Transmission system
6-speed
Final transmission
Chain

**JerryHawk250** · 04-12-2017, 04:25 PM

This is one of the Enduro bike's it come on.

Azhule · 04-12-2017, 08:39 PM

Might be the next mod for the Bashan WILL 200... 6 speeds, OHC engine, and 223cc's sounds great to me

...

I also found a few sweet oil coolers on that yoycart website... just don't know what one to pick... I can't read the "Description" page and all the translator websites claim it's already translated into English

Here's one of them

http://www.yoycart.com/Product/548221350096/

Can anyone make out what one comes with the nice "rock blocking plate"?!? Is it the ones labeled "Mesh" ?!?

culcune · 04-12-2017, 09:57 PM

Quote:

Originally Posted by JerryHawk250

I found a good replacement engine for our China bikes. Loncin RE250 6 Speed Not bad for around $530. 6 speed and counter balance

I wish these bikes would of came with this engine. Sure would be nice to have 6 speeds. I figured I would post this just in case someone was in need of an engine. Hell might just get one to do it.

Might not be technically legal to ship here. They would be happy to take your money, and send the engine, but it might end up getting confiscated at the port. Don't want to be a buzzkill, but someone had to bring it up.

Merlin · 04-12-2017, 10:16 PM

Quote:

Originally Posted by Azhule

Might be the next mod for the Bashan WILL 200... 6 speeds, OHC engine, and 223cc's sounds great to me

...

I also found a few sweet oil coolers on that yoycart website... just don't know what one to pick... I can't read the "Description" page and all the translator websites claim it's already translated into English

Here's one of them

http://www.yoycart.com/Product/548221350096/

Can anyone make out what one comes with the nice "rock blocking plate"?!? Is it the ones labeled "Mesh" ?!?

This might help. Use Chrome and let it translate:
https://world.taobao.com/item/254075...?fromSite=main

mjstef · 04-12-2017, 10:30 PM

Fender clearance is still an issue wit that style. Also not a stacked plate but rather a finned cooler. Should have my prototype this week.....

olds_cool63 · 04-13-2017, 03:14 AM

A KLX engine would do nicely, too!

goat67 · 04-13-2017, 07:38 AM

Quote:

Originally Posted by culcune

Might not be technically legal to ship here. They would be happy to take your money, and send the engine, but it might end up getting confiscated at the port. Don't want to be a buzzkill, but someone had to bring it up.

Love that engine.

Regarding confiscation so if it is not going on a street bike why would it be confiscated? Just trying to understand.

**JerryHawk250** · 04-13-2017, 07:45 AM

Quote:

Originally Posted by mjstef

Fender clearance is still an issue wit that style. Also not a stacked plate but rather a finned cooler. Should have my prototype this week.....

That is the only reason I have not bought one yet. I much rather have the stack plate cooler.

culcune · 04-13-2017, 07:57 AM

Quote:

Originally Posted by goat67

Love that engine.

Regarding confiscation so if it is not going on a street bike why would it be confiscated? Just trying to understand.

Every gasoline engine is supposed to be EPA certified. As far as whole bikes go, they are either on-road or off-road, and my guess is, the same is true of replacement engines. This engine, and I am assuming it is not EPA certified, is not supposed to be shipped here. It might make it through, but if enough people order them, eventually they run the risk of confiscation. They are shipped directly from China, so there is no risk for the seller, only the buyer. My post is just an fyi and individual circumstances probably will vary (i.e. some making it through)

**JerryHawk250** · 04-13-2017, 08:14 AM

Quote:

Originally Posted by Azhule

Might be the next mod for the Bashan WILL 200... 6 speeds, OHC engine, and 223cc's sounds great to me

...

I also found a few sweet oil coolers on that yoycart website... just don't know what one to pick... I can't read the "Description" page and all the translator websites claim it's already translated into English

Here's one of them

http://www.yoycart.com/Product/548221350096/

Can anyone make out what one comes with the nice "rock blocking plate"?!? Is it the ones labeled "Mesh" ?!?

You might have to strap on some lead boots if you put any more HP on that bike.

With 6 gears and a couple more ponies you might hit 80 mph lol

04-12-2017, 03:25 PM	#1
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	Loncin RE250 6 speed I found a good replacement engine for our China bikes. Loncin RE250 6 Speed Not bad for around $530. 6 speed and counter balance I wish these bikes would of came with this engine. Sure would be nice to have 6 speeds. I figured I would post this just in case someone was in need of an engine. Hell might just get one to do it. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	6

04-12-2017, 03:29 PM	#2
dubbya1986 Join Date: Mar 2017 Location: Springfield, MO Posts: 86	Wonder if they will bolt right up without any modifications? That is a great price considering the extra gear and being counterbalanced. __________________ 2016 Bashan Brozz 250
	0

04-12-2017, 03:33 PM	#3
2LZ Join Date: Mar 2010 Location: Volcano, Ca Posts: 7,112	It's OHC too! I think this is the motor that Fastdoc once put in an XR200. Not sure if it was a six speed though. __________________ "Light a fire for a man, and you heat him for a day. Light a man on fire, and you heat him for the rest of his life." 2007 Suzuki DRZ400S (SM convert) 2009 Q Link XP 200 1967 BSA B25 250cc Starfire 2022 Royal Enfield Interceptor 650 2023 Royal Enfield Scram 411 1948 Royal Enfield Model G 350
	1

04-12-2017, 04:14 PM	#5
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	Specifications Engine type Single cylinder, 4 stroke, oil-cooled Displacement 223.0cc Bore x stroke 65.5×66.2mm Compression ratio 9.2:1 Maximum power 17.7hp（13.2kw）/8500rpm Maximum torque 17.2N.m/6000rpm Starting method Electric Ignition system C.D.I Idle speed 1300 rpm Engine oil capacity 1.3 L Transmission Transmission system 6-speed Final transmission Chain __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	2

04-12-2017, 04:25 PM	#6
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,713	This is one of the Enduro bike's it come on. __________________ 2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	3

04-12-2017, 08:39 PM	#7
Azhule Join Date: Dec 2015 Location: CO Posts: 1,525	Might be the next mod for the Bashan WILL 200... 6 speeds, OHC engine, and 223cc's sounds great to me ... I also found a few sweet oil coolers on that yoycart website... just don't know what one to pick... I can't read the "Description" page and all the translator websites claim it's already translated into English Here's one of them http://www.yoycart.com/Product/548221350096/ Can anyone make out what one comes with the nice "rock blocking plate"?!? Is it the ones labeled "Mesh" ?!? __________________ "Think as you like... but this self proclaimed Professor is always right" - Buckshot "You never know what someone is hiding beneath their smile..." - NinjaTom - R.I.P.
	1

04-12-2017, 10:30 PM	#10
mjstef Join Date: May 2007 Location: Lac Du Flambeau, WI Posts: 804	Fender clearance is still an issue wit that style. Also not a stacked plate but rather a finned cooler. Should have my prototype this week.....
	2

04-13-2017, 03:14 AM	#11
olds_cool63 Join Date: Aug 2008 Location: Maricopa, AZ Posts: 159	A KLX engine would do nicely, too! __________________ Nuff said. olds_cool63 ======= Johnny Pag Pagsta (replaced 50cc engine with 110cc, modded-out) 2007 Tank Vision Topline Khaos (cosmetic mods, cherry-bombs) 2005 Kymco Vitality 50 2T (70cc big bore kit, other race mods...tops out at 67mph) 2008 Hyosung GT250 (cosmetic mods) 2001 Suzuki Bandit GFS1200S (cosmetic and slight mods...150mph+)
	0