12-09-2019, 11:13 PM
|
#1 |
|
Join Date: Dec 2019
Posts: 2
|
No Spark ATV (from Tractor Supply?)
Hi everyone, need some help please as I can't find a shop to work on this ATV.
ATV stopped running one day and wouldn't start again. Got a new battery and now starter cranks on push button start, but engine won't turn over and no spark on the plug.... Got a new plug and ignition wire. still no spark on plug... CDI shot? I tried to bypass safety wire on CDI. Also wired together the safety switch on the rear of the bike.... It's a 5 pin (2 pin, and 3 pin wires) but can't find a match anywhere, can I just hard wire one up that has 5 wires? Help |
|
|
12-10-2019, 11:41 AM
|
#3 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,571
|
Check here for a 5 pin CDI. You may have to buy a jumper harness.
https://www.vmcchineseparts.com/coll...inese-atv-cdis
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
12-10-2019, 04:19 PM
|
#4 | |
Join Date: Aug 2009
Posts: 511
|
Quote:
I interpret the above to mean that the starter motor is turning over, but the engine is not, that sounds like a broken starter chain behind the flywheel or the starter motor pinion gear fell off. I would remove the stator cover and look inside to see if the chain is intact and the pinion gear is in place. If everything looks okay, I would hit the starter button while watching the flywheel and see what happens. |
|
|
|
|
|
|
 |
|
|
Linear Mode
