|
02-14-2024, 03:54 PM | #1 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,331
|
I am back to a loose wire, or internal connection on an electrical part. It stalled when you pushed it off the centerstand, right?
Something is "on the edge"
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket -NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it |
|
02-14-2024, 04:09 PM | #2 | |
Join Date: Feb 2024
Posts: 12
|
Loose wires
Quote:
Also, there is a missing screw for the fuel injector. I did not remove that one. Never had one. I have moved it around while running, and nothing happened. I hope you are right. Was about to order another fuel pump. I'll put the pump back and look at the harness again. The leaning thing was very odd, especially since the tank if nearly full. |
|
|
02-14-2024, 06:05 PM | #3 |
Join Date: Feb 2024
Posts: 12
|
You were correct. There is a two wire connector in the cluster that instantly killed the bike when. Unplugged. Suppose those vibrations were enough to cause connection issues. I will make a video on it later. Thanks for the support all!!
|
|
|
|
|
|