Hawk or other 229cc engine based enduro setup database

[Do©Hawk]

Originally Posted by Megadan

Except this is a thread specific to carbureted bikes so other people could figure out an idea of how to jet their cg250 powered bikes.

Maybe, but there is nothing in the title or opening post that would suggest that.

[superjocko]

Originally Posted by Do©Hawk

Maybe, but there is nothing in the title or opening post that would suggest that.

No disrespect intended, but it's pretty clear from the first post that carburetor settings are what were asked for.

[Megadan]

Originally Posted by Do©Hawk

Maybe, but there is nothing in the title or opening post that would suggest that.

The date it was posted predates the DLX and the fact that the blank template of the first post has a "Carb" section to it being the biggest. Half of the information requested being about specific jet setups for each jet setting being another good clue.

I'm not against a dlx posting, but seeing as the DLX doesn't need much out of the box to run properly where the carb bikes need jetting and different sprockets to even hit 60mph, and more work to hit 65 to 70, that is the entire point of this particular thread. That's all.

Remember that the Hawk has been around since late 2015. The EFI bikes are a recent thing, and this post is older, from the pre-efi days.

[Do©Hawk]

Originally Posted by superjocko

No disrespect intended, but it's pretty clear from the first post that carburetor settings are what were asked for.

Non taken, but I disagree. A clearer 1st post would request carb settings, not mods to 229cc Enduro style motorcycles which could include EFI motorcycles.

Dan, you got me on the thread date and history of the Hawk 250 vs Hawk 250 DLX EFI. I didn't choose my Hawk based off of fuel delivery. My Hawk chose me and happens to be EFI.

Point taken. EFI not welcome(in this thread) I'll try not to "muddy the waters" for the carb folks.

[bigdano711]

Bike: 2023 XPRO Hawk

Elevation: 6800ft

Carb: PE28FL

Jet sizes: 105 main, 38 pilot

Needle setting: Keihin JJH needle, Position 3, middle

Air/Fuel mixture screw: 1.25 - 1.5 turns out

Sprocket combo: 17/43

Relevant mods: JFG Exhaust, Motocult thin steel head gasket

Top speed: 65 (digital dash, speed confirmed on GPS)