has anyone seen a pilot jet like this?

pezgoon · 05-05-2009, 11:04 PM

anyone seen a pilot jet like this? its from a sheng wey pd3 carb, i have yet to test out the carb itself but the other two (stock one and a "mikuni") needed a richer pilot jet, but because i like this carb the best i wanted to find the parts for this one to make this one work

mblas3 · 05-06-2009, 08:03 AM

My original carburetor had that same jet. I was not able to find a larger one so I replaced the carburetor. Good luck finding one.

M

liverchip · 05-06-2009, 11:43 AM

Should be a normal Keihin pilot jet. I get mine at Chaparral as they're relatively close to me.

liverchip · 05-06-2009, 12:11 PM

http://www.keihin-us.com/list.htm

This is a list of Keihin jets.

pezgoon · 05-06-2009, 08:33 PM

none of the jets match mine tho which was the issue

red85 · 05-06-2009, 08:34 PM

For all a new Mikuni costs, it's worth it to just replace the carb. I replaced my Sheng Wey (Keihin clone) with a 24mm Mikuni and there is no comparison. The Mikuni just seems to work better all the way through the rev range than the "Keihin" ever did. I think I paid about 25 bucks for it on Ebay.

food for thought...

Phil

pezgoon · 05-06-2009, 09:52 PM

funny, i just put in a shengwey and its the first (of three) carbs to finally let the bike run, i may try and get a mikuni or keihnin but right now the shengwey works fine for me

liverchip · 05-08-2009, 05:46 PM

Quote:

Originally Posted by red85

For all a new Mikuni costs, it's worth it to just replace the carb. I replaced my Sheng Wey (Keihin clone) with a 24mm Mikuni and there is no comparison. The Mikuni just seems to work better all the way through the rev range than the "Keihin" ever did. I think I paid about 25 bucks for it on Ebay.

food for thought...

Phil

Are you sure it's an actual Mikuni? What I'm seeing on e-bay look like chinese knockoffs. (Yes I know....complaining about a chinese knockoff on this site is ironic)

red85 · 05-08-2009, 09:01 PM

Quote:

Originally Posted by liverchip

Quote:

Originally Posted by red85

For all a new Mikuni costs, it's worth it to just replace the carb. I replaced my Sheng Wey (Keihin clone) with a 24mm Mikuni and there is no comparison. The Mikuni just seems to work better all the way through the rev range than the "Keihin" ever did. I think I paid about 25 bucks for it on Ebay.

food for thought...

Phil

Are you sure it's an actual Mikuni? What I'm seeing on e-bay look like chinese knockoffs. (Yes I know....complaining about a chinese knockoff on this site is ironic)

Definitely a Mikuni. Got it on ebay from a place called TecoParts. They're out of Hong Kong and it shipped pretty quick.

mblas3 · 05-09-2009, 07:44 PM

Everything from Hong Kong is "genuine" :wink:, but that is a knockoff carburetor. I have two of them. One has a 38 pilot jet and the other has a 40. What size are you looking for?

Also from trying to tune the carburetor before I found one with a actual Mikuni style pilot jet I found the main jets where not accurate in there marked sizes.

M

pezgoon · 05-10-2009, 03:30 PM

i was actually looking to find the jets before i even tried the carb, when i tried it, it runs perfectly! it is even on the rich side anyways so im alset, but thanks guys

liverchip · 05-11-2009, 02:07 PM

I cannot seem to locate any documentation on the Mikuni website for these "genuine" Mikuni carbs. Perhaps they're just Mikuni "style"?

pezgoon · 05-11-2009, 10:22 PM

thats what i figure lol

05-05-2009, 11:04 PM	#1
pezgoon Join Date: Jul 2007 Posts: 56	has anyone seen a pilot jet like this? anyone seen a pilot jet like this? its from a sheng wey pd3 carb, i have yet to test out the carb itself but the other two (stock one and a "mikuni") needed a richer pilot jet, but because i like this carb the best i wanted to find the parts for this one to make this one work
	0

05-06-2009, 11:43 AM	#3
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	Should be a normal Keihin pilot jet. I get mine at Chaparral as they're relatively close to me. __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0

05-06-2009, 12:11 PM	#4
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	http://www.keihin-us.com/list.htm This is a list of Keihin jets. __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0

05-11-2009, 02:07 PM	#12
liverchip Join Date: Nov 2006 Location: Mystery Spot Posts: 1,223	I cannot seem to locate any documentation on the Mikuni website for these "genuine" Mikuni carbs. Perhaps they're just Mikuni "style"? __________________ 2009 XR650L Big Red Pig Tusk bar risers 2007 X-Moto(Jetmoto) GY250 --mods--- 15/40 sprockets UNI Pod Filter 2007 Shineray TMS 200XYi--Betsy Betsy Mods:______________________ Acerbis DHH headlight FMF Powercore pipe Uni Pod Filter
	0

05-06-2009, 08:03 AM	#2
mblas3 Join Date: Mar 2007 Posts: 120	My original carburetor had that same jet. I was not able to find a larger one so I replaced the carburetor. Good luck finding one. M
	0

05-06-2009, 08:33 PM	#5
pezgoon Join Date: Jul 2007 Posts: 56	none of the jets match mine tho which was the issue
	0

05-06-2009, 08:34 PM	#6
red85 Join Date: Mar 2009 Posts: 63	For all a new Mikuni costs, it's worth it to just replace the carb. I replaced my Sheng Wey (Keihin clone) with a 24mm Mikuni and there is no comparison. The Mikuni just seems to work better all the way through the rev range than the "Keihin" ever did. I think I paid about 25 bucks for it on Ebay. food for thought... Phil
	0

05-06-2009, 09:52 PM	#7
pezgoon Join Date: Jul 2007 Posts: 56	funny, i just put in a shengwey and its the first (of three) carbs to finally let the bike run, i may try and get a mikuni or keihnin but right now the shengwey works fine for me
	0

05-09-2009, 07:44 PM	#10
mblas3 Join Date: Mar 2007 Posts: 120	Everything from Hong Kong is "genuine" :wink:, but that is a knockoff carburetor. I have two of them. One has a 38 pilot jet and the other has a 40. What size are you looking for? Also from trying to tune the carburetor before I found one with a actual Mikuni style pilot jet I found the main jets where not accurate in there marked sizes. M
	0

05-10-2009, 03:30 PM	#11
pezgoon Join Date: Jul 2007 Posts: 56	i was actually looking to find the jets before i even tried the carb, when i tried it, it runs perfectly! it is even on the rich side anyways so im alset, but thanks guys
	0

05-11-2009, 10:22 PM	#13
pezgoon Join Date: Jul 2007 Posts: 56	thats what i figure lol
	0