Go Back   ChinaRiders Forums > Technical/Performance > Adventure Bikes > Zongshen RX3
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 02-25-2015, 05:49 AM   #1
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
The Hanjin Germany is now sailing offshore Nemuro, the easternmost city in Japan.



Very shortly the vessel will be offshore the Southern Kuril Islands, and leaving the vicinity of Japanese waters. The Southern Kuril Islands are disputed territory controlled by Russia since 1945.

Russia actually shares a border with North Korea, and the port of Vladivostock is as far south as the Japanese city of Sapporo. The Hanjin Germany will be sailing outside Russian waters for quite a while, until it approaches the Aleutian Islands of Alaska. The last reported location of the vessel is:

LAT: 42° 40' N LONG: 145° 52' E
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 02-25-2015, 09:03 AM   #2
Wolftrax   Wolftrax is offline
 
Wolftrax's Avatar
 
Join Date: Sep 2014
Location: Blue Ridge Mtns Ga
Posts: 437
What an odd winter, temps here in Ga should be in the 50's by now. Instead we have 4" of snow on the ground with a foreceast of another 5" to 8" by tomorrow. Oh and the temps will stuggle to make it above freezing. I normally ride all winter long, but not this year. Just as well the RX3 wasn't delivered earlier.
__________________
Mark


2015 Haosen Hawk 250
2014 CRF250L
2014 CB500X Rally Raid


 
Reply With Quote
Old 02-25-2015, 11:40 AM   #3
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Quote:
Originally Posted by Wolftrax View Post
What an odd winter, temps here in Ga should be in the 50's by now. Instead we have 4" of snow on the ground with a foreceast of another 5" to 8" by tomorrow. Oh and the temps will stuggle to make it above freezing. I normally ride all winter long, but not this year. Just as well the RX3 wasn't delivered earlier.
It has been odd here also, but in reverse. We've already seen temps near 70F, and the blossoms are out in force. Very mild winter here.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 02-25-2015, 03:14 PM   #4
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Quote:
Originally Posted by Wolftrax View Post
What an odd winter, temps here in Ga should be in the 50's by now. Instead we have 4" of snow on the ground with a foreceast of another 5" to 8" by tomorrow. Oh and the temps will stuggle to make it above freezing. I normally ride all winter long, but not this year. Just as well the RX3 wasn't delivered earlier.
Today the high temperature will push 50 degrees Fahrenheit in East Idaho. Last week the temperature reached 60 degrees for three days in a row. This fellow in Kentucky is probably not accustomed to shoveling so much snow.

__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 02-25-2015, 03:28 PM   #5
detours   detours is offline
 
detours's Avatar
 
Join Date: Sep 2014
Location: Arvada, CO
Posts: 1,004
Based on the latest blog pics of the new 17/19 wheels, the tires look like Bridgestone Trailwings TW39 (front) and TW42 (Rear). They seems like a good 60/40 (hwy biased) tire. If they wear anything like the TW101 & TW152 on my V-strom, they should last a long time, except a lot better offroad.

I like the idea of buying the 19" wheel/tire and switching back and forth from stock depending on the ride. But I wonder how much difference changing the front will make offroad if I keep using the stock rear till it wears out.


 
Reply With Quote
Old 02-25-2015, 03:30 PM   #6
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
CSC just posted a tutorial on adjusting the drive chain. I have added a link to this tutorial under the Maintenance subheading in the RX3 Sticky thread.

http://chinariders.net/showthread.php?t=14228
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 02-25-2015, 03:42 PM   #7
3banger   3banger is offline
 
3banger's Avatar
 
Join Date: Nov 2014
Posts: 159
You could regain someone of the sharper handeling by dropping the forks in the triple clamps a bit. Will the 19" wheels be availbe to order and be delivered a long with the stock 18" wheels?

I guessed 4 of the 5 last night and was thinking bigger front wheel but just kept thinking a 21" would look lot bigger. Never occured to think 19", but thanks for the entertaining back and fourth Joe!

The owner ship experience for the RX-3 is proving to quite unique in all good ways and we don't even have the bike yet! Joe once this bike starts getting high visabulity with a bunch of us early adopters running around the back roads I hope CSC is prepared to grow!


 
Reply With Quote
Old 02-25-2015, 03:50 PM   #8
CSCDude   CSCDude is offline
 
CSCDude's Avatar
 
Join Date: Sep 2014
Posts: 247
Quote:
Originally Posted by 3banger View Post
You could regain someone of the sharper handeling by dropping the forks in the triple clamps a bit. Will the 19" wheels be availbe to order and be delivered a long with the stock 18" wheels?

I guessed 4 of the 5 last night and was thinking bigger front wheel but just kept thinking a 21" would look lot bigger. Never occured to think 19", but thanks for the entertaining back and fourth Joe!

The owner ship experience for the RX-3 is proving to quite unique in all good ways and we don't even have the bike yet! Joe once this bike starts getting high visabulity with a bunch of us early adopters running around the back roads I hope CSC is prepared to grow!
Thanks for your kind words. Lots of emails last night. It was fun.

The 19-inch wheel kits will be available to order with the bike. We'll post a price shortly.

We are prepared to grow and we are very excited about this motorcycle. It's one of the coolest projects I've ever been involved with.
__________________
Joe
www.ExhaustNotes.us


 
Reply With Quote
Old 02-25-2015, 07:17 PM   #9
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
CSCDude,

I like your avatar.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 02-26-2015, 12:29 AM   #10
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Three hours ago the Hanjin Germany was sailing northeast at 14.5 knots. The vessel was offshore the Kuril island of Urup.



Yesterday, a 4.6 magnitude earthquake occurred in this area.

http://www.emsc-csem.org/Earthquake/....php?id=429118

The Germany is sailing along the Kurile Trench of the Pacific Ring of Fire, and is heading next for the Aleutian Trench.



Here are some photographs of Urup, courtesy of Google Earth.



__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 02-26-2015, 01:33 AM   #11
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
A few people have complained about the size and shape of the right side pannier. I think this pannier will make an excellent, large tool box. It can hold a spare inner tube and a nice, large tool kit. In addition, it's a good place to stash snacks and your rain gear.

__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 02-26-2015, 02:51 AM   #12
FTEY   FTEY is offline
 
Join Date: Feb 2015
Posts: 48
Quote:
Originally Posted by SpudRider View Post
A few people have complained about the size and shape of the right side pannier. I think this pannier will make an excellent, large tool box. It can hold a spare inner tube and a nice, large tool kit. In addition, it's a good place to stash snacks and your rain gear.

Yup. Ma rain gear is sitting nicely in there.


 
Reply With Quote
Old 02-26-2015, 07:51 AM   #13
NoVa Rider   NoVa Rider is offline
 
Join Date: Jan 2015
Location: Northern Virginia
Posts: 144
Now that I can see the inside of the right pannier, its less going to be much than the 18.5 liters I guesstimated based on Joe's exterior measurements. And I see why Joe did not attempt to figure the interior volume of the stock luggage: too many bends and indentations.

I should wait until I get my RX-3 and see how I use it before making a luggage purchase. Still, presuming I will stick with the stock hard luggage, I am surfing options for a duffle to strap on the seat, and use for light camping trips.

Right now the medium Nelson Rigg Survivor tail bag looks possible. About 40 liters, waterproof, about $60 with shipping, and its available in an orange color that might/might go with the RX-3 orange/yellow color option.


 
Reply With Quote
Old 02-26-2015, 08:35 AM   #14
katflap   katflap is offline
 
katflap's Avatar
 
Join Date: Jan 2015
Location: England
Posts: 382
perhaps this gives an idea of space . Size 9 (US) boot I can get the other one in upside down and shut the lid.

With the pannier next to the exhaust it might keep your fish & chips warm on the way home




Have been trying to get the torque settings together in one place but the different manuals quite often have different torques for the same thing.This is what I've got so far.
Code:
 ******************************************************************** RX3 INFO AND TORQUE SETTINGS 1a *************************************************************************
 ******************************************************************** NO GUARANTEE OF ACCURACY, USE AT OWN RISK !! *****************************************************
  
                                                  ---------------------------------------------------------------------------------------
                                                 
                                                     Some sources stated different torque values so an alternative torque is given 
                                                  ------------------------------katflap--------------------------------------------------
  
 Headlight bulb       HS1 35/35w
  
 Tyres
------ 
 Front                100/90-18    225 kpa   (32.6 psi)
 Rear                 130/90-15    250 kpa   (36.2 psi)
  
 Chain slack          10mm - 25mm    (alternative slack 15mm-25mm)
  
 Coolant level        The level of coolant is correct when it is at the bottom of the filler neck    (alternative, 5mm below the top)
  
  
 Engine               ZS177MM-P
  
 Idle                 1500 ± 100 RPM
  
 Valve clearance      INLET – 0,05mm / EXHAUST – 0,08mm         (alternative 0.04mm to 0.06mm inlet & exhaust)
  
 Engine oil           SJ 5W/40         (alternative 10w/40)
  
 Spark plug           CHAMPION RG6YC or NGK CR8E   0.6 - 0.7 mm   Torque 11Nm (8.1 ftlbs)
  
 
 
 
Engine oil drain plug (M14)              25Nm (18.4 ftlbs)     (alternative 15Nm , 11 ftlbs)
 Main oil filter cover bolts (M5)         8 Nm (5.9 ftlbs)      (alternative 10.8Nm  8 ftlbs / 12Nm , 8.8 ftlbs / 17.5Nm , 12.9 ftlbs)
 Oil strainer plug left crankcase (M20)   13.5Nm (10 lbsft)     (alternative 10nm , 7.3 ftlbs)
 Oil strainer plug right crankcase (M20)  13.5Nm (10 lbsft)     (alternative 10nm , 7.3 ftlbs)
  
 
sprocket cover bolts                     16.2Nm  (12 ftlbs)
 sprocket bolt                            48.6Nm  (36 ftlbs)     (alternative 55Nm , 40.5 ftlbs)
  
 Ignition (generator) cover bolt (M6)     10Nm    (7.4 ftlbs)
 clutch cover bolts (M6)                  10.8Nm  (8 ftlbs)
 water pump bolts                         9.4Nm   (7 ftlbs)
 Inlet duct (manifold) (M6)               10Nm    (7.4 ftlbs)
 Exhaust nut (m8)                         20.2Nm  (15 ftlbs)      (alternative 13Nm , 9.6 ftlbs)
 Crankcase bolt (M6)                      10Nm    (7.4 ftlbs)
 Gearshift pedal bolt (M6)                10Nm    (7.4 ftlbs)
  
 Cylinder head bolt                       38Nm    (28 ftlbs)
 Cylinder head bolt (M6)                  10Nm    (7.4 ftlbs)
 Cylinder bolt (M10)                      50nm    (36.9 ftlbs)
 Rotor nut (M14)                          80-90Nm (59-66.3 ftlbs)
 Primary nut (M18)                        110 Nm  (81 ftlbs)
 Clutch spring bolts (M5)                 8Nm     (5.9 ftlbs)
 Balance shaft nut (M16)                  80-90Nm (59-66.3 ftlbs)
 Crankshaft nut (M24)                     80-90Nm (59-66.3 ftlbs)
  
 Locknut of main pipe (M24)               25~35Nm (18.4-25.8 ftlbs)
 Fixed bolt of handlebar (M10)            50~60Nm (36.9-44.2 ftlbs)
 handle bar clamp bolts (hex head M8)     28~32Nm (20.6-23.6 ftlbs)
 Front axle nut (M14)                     70~80Nm (51.6-59.0 ftlbs)
 Front axle flange bolts (clamp) (M8)     18~25Nm (13.3-18.4 ftlbs)
 Rear axle nut (M14)                      70~80Nm (51.6-59.0 ftlbs)
 Engine suspension bolt (M10)             45~55Nm (33.2-40.5 ftlbs)
 Fixed nut of rear shock absorber (M10)   45~55Nm (33.2-40.5 ftlbs)
 Locknut of chain wheel (M8)              28~32Nm (20.6-23.6 ftlbs)
 Nut of rear rocker arm (M12)             50~60Nm (36.9-44.2 ftlbs)
 fork shaft nut (M12)                     55~65Nm (40.5-47.9 ftlbs)
 fork shaft nut (M10)                     45~55Nm (33.2-40.5 ftlbs)
  
 Engine mount (top)                       35Nm    (26 ftlbs)
 engine mount (middle)                    40.5Nm  (30 ftlbs)
 engine mount (low )                      40.5Nm  (30 ftlbs)
  
  
  
 Pannier & top box frame and pannier boxes
 M8×85
M8x80
M8x60
M8x40
M8x35
M8×20
 M6×35
M6×20
 
           18~25Nm  (13.3-18.4 ftlbs)
  
 Front protection bars
 
M8×50
M8×45
M8×16
 
          18~25Nm  (13.3-18.4 ftlbs)


 
Reply With Quote
Old 02-26-2015, 10:24 AM   #15
thillskier   thillskier is offline
Banned
 
Join Date: Oct 2014
Posts: 223
Where to purchase?

Nelson Rigg bag, Nova? Seems like a bargain for that size at $60.00, also! Thanks for sharing about it. I have been looking for one (and options for a tank bag as well). Have signed up for the CSC one, but am still looking, as I have never had one on any of my bikes in the past.


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:11 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.