what s a 30mm mikuni? - Page 2

zingshoen · 06-19-2012, 09:57 AM

i d like to put this up for discussion:

http://www.pccmotor.com/30mm-mikuni-...-30200250.html

seems to be a 26mm mikuni as stamped on the carbie in the 5th picture. Carburetors are measured by bore size not by inlet or air intake openings.

or could i be wrong here? :?

+++

the 30mm mikuni is here:

http://www.mikuni-topham.de/ENGLISHS...e_English.html

click on VM carburettors
scroll to VM30-83 that s the mikuni roundslide carbie
40mm front and 58 mm rear spigot diameter

flatslide would be better, but at least its 30 mm are real :-)
+++
the 26 mm carbie may have its applications, but for a 250 cc it would be underpowering.

or could i be wrong? 8)

06-19-2012, 09:57 AM	#1
zingshoen Join Date: Jun 2009 Location: Brisbane, Queensland, Australia Posts: 648	what s a 30mm mikuni? i d like to put this up for discussion: http://www.pccmotor.com/30mm-mikuni-...-30200250.html seems to be a 26mm mikuni as stamped on the carbie in the 5th picture. Carburetors are measured by bore size not by inlet or air intake openings. or could i be wrong here? :? +++ the 30mm mikuni is here: http://www.mikuni-topham.de/ENGLISHS...e_English.html click on VM carburettors scroll to VM30-83 that s the mikuni roundslide carbie 40mm front and 58 mm rear spigot diameter flatslide would be better, but at least its 30 mm are real :-) +++ the 26 mm carbie may have its applications, but for a 250 cc it would be underpowering. or could i be wrong? 8) __________________ 1971 Garelli Gulp 50cc with open ports and 16 mm Bing Carbie + 1980 Honda XL 223 ZS + 2007 Zongshen LZX200G + DR400SM
	1