I did the 190 Swap! - Page 2

PhildoScaggins · 06-26-2019, 10:03 AM

I just saw that guy selling the fuel injection kits for $500 for the 190. After seeing how intricate Glaveys post of doing it himself that $500 would seem worth it.

scoot newb · 06-26-2019, 02:46 PM

Oh yeah, Mike Davis. I've been thinking about getting one. The problem is, I don't know how to tune it and none of the shops that dyno tune in my area will touch it.

wlfpck · 06-26-2019, 03:07 PM

Guy selling the kit is Mike Davis. His kit is pre-tuned for a zs190cc. May want to check his stuff out. If I'm not mistaken, I believe his also has ability to "self-tune".

scoot newb · 06-26-2019, 03:11 PM

You're right. I had the name confused. I edited it. Mike Davis, I spoke with him and there is a 'base map' tune on it that may run well enough to get it to a shop that can tune it.

PhildoScaggins · 06-27-2019, 06:48 PM

Is this really a thing? I've never heard of having to do that. If so, is there a household cleaner I can use?

scoot newb · 06-27-2019, 07:33 PM

Quote:

Originally Posted by PhildoScaggins

Is this really a thing? I've never heard of having to do that. If so, is there a household cleaner I can use?

Which part? Using the oil filter grease/spray or cleaning it?

I saw a video on YT showing Dollar Store Totally Awesome cleaner cleaning a Uni-filter. I bought some and it worked as advertised. Using the grease... yeah back in the day with dirt bikes.

https://www.amazon.com/UNI-Foam-Filt...dp/B0022ZN68Y/

PhildoScaggins · 06-27-2019, 07:38 PM

Quote:

Originally Posted by scoot newb

Which part? Using the oil filter grease/spray or cleaning it?

/

I guess cleaning it. I havent added any grease, why would I need to wipe it down?

scoot newb · 06-27-2019, 07:40 PM

For oil cutting solvent you can use rubbing alcohol. But don't use that on the foam just the rubber part that connects to the carb.

The grease helps keep dirt and other particles from getting sucked through the foam. Mine didn't come with that sticker and I don't use grease on mine but it couldn't hurt.

scoot newb · 06-27-2019, 07:43 PM

Oh. I think they mean clean it down after applying the grease spray to the filter element to prevent a gob from getting into the motor.

PhildoScaggins · 06-27-2019, 07:53 PM

Quote:

Originally Posted by scoot newb

Oh. I think they mean clean it down after applying the grease spray to the filter element to prevent a gob from getting into the motor.

Thanks. That makes more sense. It wasnt greasy, the warning had me confused. I got some stuff to fab up a bracket to get this exhaust on. Hopefully I will be in business soon!

scoot newb · 06-27-2019, 07:59 PM

Nice! Post some pictures of your ride

scoot newb · 09-13-2019, 02:53 AM

I stuffed a Harley LED and bucket into a Monster Eye bracket. I like it. It is bright and looks better IMO. I just need to trim the back of the bucket so more wiring can fit behind it. I added a used Vader font fender. It has a crack.

Some new items arrived. I like 17 34 sprocket ratio and decided to go to 16 32 and from 428 to 420. Less weight less spinning mass right?

I also got some tires

Coming Soon

What do you think?

Whisky · 09-14-2019, 02:48 AM

Your really going to town, new tires too and good choice, cant wait to see the new rims mounted, soon I hope? Are u running the rear 32t now? how is it compared to the 34t? I have a 32t debating weather to change or not, I'm sure there's still plenty of torque? I don't want to run a 17 on the front, not enough room like there was with the 125.

scoot newb · 09-14-2019, 06:37 AM

It's still 17/34 on there now. I am going to swap everything over once the rims come. I am pissed off. My horn isn't working.

Whisky · 09-14-2019, 07:41 AM

Your running a 17 on the front? That's a very tight fit. I think going up 1t in front is the same as going down 3 in the back. I could be wrong though. I've never used my horn, I suppose I should see if it works.

06-26-2019, 03:07 PM	#18
wlfpck Join Date: Mar 2018 Posts: 249	Guy selling the kit is Mike Davis. His kit is pre-tuned for a zs190cc. May want to check his stuff out. If I'm not mistaken, I believe his also has ability to "self-tune". __________________ 2020 Honda Grom 2017 Icebear Fuerza (Daix PMZ125-1) - Sold
	0

09-14-2019, 02:48 AM	#28
Whisky Join Date: Aug 2018 Posts: 286	Your really going to town, new tires too and good choice, cant wait to see the new rims mounted, soon I hope? Are u running the rear 32t now? how is it compared to the 34t? I have a 32t debating weather to change or not, I'm sure there's still plenty of torque? I don't want to run a 17 on the front, not enough room like there was with the 125. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

09-14-2019, 07:41 AM	#30
Whisky Join Date: Aug 2018 Posts: 286	Your running a 17 on the front? That's a very tight fit. I think going up 1t in front is the same as going down 3 in the back. I could be wrong though. I've never used my horn, I suppose I should see if it works. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

06-26-2019, 10:03 AM	#16
PhildoScaggins Join Date: Apr 2017 Location: Woods, Maine Posts: 247	I just saw that guy selling the fuel injection kits for $500 for the 190. After seeing how intricate Glaveys post of doing it himself that $500 would seem worth it.
	0

06-26-2019, 02:46 PM	#17
scoot newb Join Date: Sep 2018 Posts: 403	Oh yeah, Mike Davis. I've been thinking about getting one. The problem is, I don't know how to tune it and none of the shops that dyno tune in my area will touch it.
	0

06-26-2019, 03:11 PM	#19
scoot newb Join Date: Sep 2018 Posts: 403	You're right. I had the name confused. I edited it. Mike Davis, I spoke with him and there is a 'base map' tune on it that may run well enough to get it to a shop that can tune it.
	0

06-27-2019, 06:48 PM	#20
PhildoScaggins Join Date: Apr 2017 Location: Woods, Maine Posts: 247	Is this really a thing? I've never heard of having to do that. If so, is there a household cleaner I can use?
	0

06-27-2019, 07:40 PM	#23
scoot newb Join Date: Sep 2018 Posts: 403	For oil cutting solvent you can use rubbing alcohol. But don't use that on the foam just the rubber part that connects to the carb. The grease helps keep dirt and other particles from getting sucked through the foam. Mine didn't come with that sticker and I don't use grease on mine but it couldn't hurt.
	0

06-27-2019, 07:43 PM	#24
scoot newb Join Date: Sep 2018 Posts: 403	Oh. I think they mean clean it down after applying the grease spray to the filter element to prevent a gob from getting into the motor.
	0

06-27-2019, 07:59 PM	#26
scoot newb Join Date: Sep 2018 Posts: 403	Nice! Post some pictures of your ride
	0

09-13-2019, 02:53 AM	#27
scoot newb Join Date: Sep 2018 Posts: 403	I stuffed a Harley LED and bucket into a Monster Eye bracket. I like it. It is bright and looks better IMO. I just need to trim the back of the bucket so more wiring can fit behind it. I added a used Vader font fender. It has a crack. Some new items arrived. I like 17 34 sprocket ratio and decided to go to 16 32 and from 428 to 420. Less weight less spinning mass right? I also got some tires Coming Soon What do you think?
	3

09-14-2019, 06:37 AM	#29
scoot newb Join Date: Sep 2018 Posts: 403	It's still 17/34 on there now. I am going to swap everything over once the rims come. I am pissed off. My horn isn't working.
	0