|
|
|
|
Thread Tools | Search this Thread | Display Modes |
06-16-2017, 12:16 AM | #31 |
Join Date: May 2017
Posts: 4
|
Hi guys, I just bought the ice bear fuerza 125cc, it is a clone of a modded grom. The first mod I did to it was the front sprocket mod to a 17 tooth. mine also uses the 428 chain. initial testing shows no gain in top speed, but rpm's are a little lower and 1st gear is a little longer before shifting to second. sounds like the same specs as the vader from what you've mentioned.
Maxi, can you tell me what motor you vader has in it? Mine is a LONCIN 152FMI... There should be a sticker on the top rear of the motor.. does a grom exhaust fit your vader at the head? Exhaust is my next mod, but I don't know what will fit... I want a low mount muffler, if you find something that works, let me know. I hope this thread continues... |
|
07-05-2017, 06:55 PM | #32 | |
Join Date: Jul 2017
Posts: 1
|
Power of chineese motors
Quote:
Ps Maybe put a ram air intake on that can help, just dont run to lean |
|
|
07-06-2017, 10:20 PM | #33 |
Join Date: Apr 2007
Location: Waynesboro, Virginia
Posts: 336
|
I spoke to Venom Powersports today and the next shipment of Vaders aka X20 is supposed to be modeled after the 2017 Grom. The headlight is supposed to be the same as well however I'm not sure if it will be LED. My Brozz is supposed to be picked up Saturday and I'm thinking about ordering one of these.
__________________
Brian Previously owned / operated MOTO Xtreme selling American Lifan / Check out my friends at www.armattanquads.com "Imagination is more important that knowledge" Albert Einstein |
|
09-17-2017, 12:14 AM | #34 | |
Join Date: Sep 2017
Posts: 10
|
Quote:
|
|
|
|
|
|
|