![]() |
#46 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Wow! I'm looking forward to seeing the adapter installed.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#47 |
Join Date: Sep 2014
Posts: 35
|
Hi my friends.. on the occasion of the upcoming holidays of Christmas and New Year I want to wish you all the best for you and your loved ones and your china motorbikes !!
![]() ![]() |
![]() |
![]() |
#48 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Thank you, Tokar.
![]() I also wish you a very Merry Christmas, and a Happy New Year. ![]()
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." ![]() 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
![]() |
![]() |
#49 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Thanks, Tokar!
Merry Christmas and Happy New Year to you as well. That is an awesome shop.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#50 |
Join Date: Sep 2014
Posts: 35
|
hello, I have a question.
With what strength I tighten the head? (With NewtonMeter)? Service manual? |
![]() |
![]() |
#51 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
The cylinder head bolts? I took this from the manual:
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#52 |
Join Date: Sep 2014
Posts: 35
|
Thanks !
![]() |
![]() |
![]() |
#53 |
Join Date: Sep 2014
Posts: 35
|
Hi. Tomorrow I'll add photos and videos
![]() good night ![]() |
![]() |
![]() |
#54 |
Join Date: Sep 2014
Posts: 35
|
Hii..
Im uploading only fotos , i dont upload video ,because quality is bad. New piston , new valves , teflon chain roll , im getting ready for the rally, I will compete with ktm yamaha honda in the June ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() |
![]() |
#55 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
How does it run for you now?
Your chain looks a little tight. Can you use a chain slider instead of a roller?
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#56 |
Join Date: Sep 2014
Posts: 35
|
This roll is spinning, it is not tight chain of
|
![]() |
![]() |
#57 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Ok. I hope it works well for you.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#58 |
Join Date: Sep 2014
Posts: 35
|
Hello,
Today I made a phone holder on the steering wheel, and such a thing from scrap: D Well, I did it for the purpose of removing (disengaging) valve head. I quite often manually pressing long struggled with this. It turned out such a thing, and have saved a lot of time with this device quite simple. ![]() ![]() And now handle. 1. fastened at the beginning of the turret (rieser's) ![]() ![]() ![]() 2. then measure around your phone with 5mm sponge clearances I used 3mm sheet and flat. ![]() ![]() 3. I used the sponge - about 3mm thick - I remember it as a sponge for door frames to keep banging. Tiling the center of our attachment - I previously painted white spray, was supposed to be black mat but what was available that I usedm ![]() ![]() ![]() 4. Finally it looks like this. ![]() ![]() ![]() ![]() ![]() ![]() ![]() Nokia lumia phone is 610 with Windows phone, and Marketplace are several free counters gps, etc. The latter with a white background refreshes quickly ![]() Maybe someone'll like, I hope ![]() ![]() |
![]() |
![]() |
#59 |
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
|
Very creative! Does the foam hold the phone at speed, or do you secure it?
That lever on the bench looks like a good idea for removing valve springs.
__________________
Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer |
![]() |
![]() |
#60 |
Join Date: Sep 2014
Posts: 35
|
The foam protects against vibration, the phone will be protected plexiglass
|
![]() |
|
![]() |
![]() |
|
|