What did you BUY today? - Page 42

bogieboy · 08-17-2017, 06:17 PM

https://www.milwaukeetool.com/power-...rdless/2420-22

Hehe.....

bogieboy · 08-17-2017, 06:18 PM

On a somber note though, i sold my kawasaki ke100 tonight..... i havent ridden it in 4 yrs.... was time to let it get used.......

BlackBike · 08-18-2017, 07:32 PM

[QUOTE=bogieboy;263728]https://www.milwaukeetool.com/power-...rdless/2420-22

Hehe.....

AKA...THE MASTER KEY

bogieboy · 08-19-2017, 06:21 AM

Yep....... used it yesterday to get me a $25 draw tite hitch from the scrapyard..... 2 bolts spun the nut inserts out of the frame and held it hostage...... cut right thru them grade 10.9 bolts....hehehe

**cheesy** · 08-19-2017, 08:59 AM

Two different locking gas caps for the Ural. One is a keyed Stant and the other is a pop up. Same thread as vented Harley tank. Whodathunkit?

**cheesy** · 08-20-2017, 06:39 PM

Went to Harbor Freights' Parking Lot Sale on a whim today. Browsed the 'As-Is' section. Everything with an orange price tag was 50% off the price on the tag.

So, scored an electric sheet metal shear for $10. Also found a hand held band saw $50.

The shear was NIB, the box was beat to hell, though. Tried it for grins on a piece of 26ga and it went through it like butter. Supposed to handle up to 18ga. I don't usually work with anything above 20ga, so it should work fine. Maybe my cuts will be straight now. Or worse.

The band saw was definitely used and refurbished, but works a charm. Keeping this in the back of the shop truck.

bogieboy · 08-25-2017, 12:00 PM

lets see.... yesterday i bought a new set of calipers and soft lines for my dakota (thanks to a seized caliper and a bad hose, causing a small fire in the wheelwell

) and scooby (my forester) was getting jealous that he didnt get anything so i bought him a nice set of coilovers! he responded as such :

**cheesy** · 08-26-2017, 07:22 AM

Pretty pin spanners, bogie. Nice that you can get a square drive on them. I find that most supplied spanners are too short to be of any use. Ended up using a Sugino bb locking tool on the shocks on both bikes.

Darkrider · 09-08-2017, 08:10 AM

5 3/4 LED "Daymaker" Headlight, Lifeproof handlebar mount, spare Lifeproof mount adapter. Bikemaster Dual Usb socket in a handlebar mount, As well as a used Harley Davidson "Boom" Audio kit and XM radio. All the above for the Softail. I will be looking at smokers and bbqs later today.

**JerryHawk250** · 09-08-2017, 02:55 PM

I picked up a Dual Fuel Carb for $24.99 for my Wen 4750 Generator. With all the Hurricanes and being in Hurricane alley I want to be prepared. I'm setting it up to run on natural gas so I don't have to worry about getting gasoline to run for a week. I've been through a few major hurricanes in my life and have been without power for as long as 3 weeks. I'll still have gasoline on hand if for some reason they shut off the gas lines. Most conversion kits are $180 and up and are a lot more involved in setting up. This one can be install in 15-20 minutes. I can also run on propane if needed. I already have my electrical panel set up with an interlock so I don't accidently back feed into the main lines. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
This is similar to what I have set up except I made mine from a piece of Lexan that I had laying around.

Megadan · 09-08-2017, 04:13 PM

New tires for my Hawk. Currently waiting for them to be installed (free mount/balance with purchase). I also ordered the front and rear sprockets for my 520 chain conversion.

**cheesy** · 09-08-2017, 10:22 PM

Three Hall Effect Sensors. Just because.

pete · 09-09-2017, 12:26 AM

A small fortune in frameing timber...
To meany bikes in the shed & no room to work on them
so I have to work on them out side but theres been a
lot of rain this winter...
So going to put another 3.5m X 4.2m section on the rear
just for working on them & get a lift table as some stage..

.

Darkrider · 09-10-2017, 12:47 PM

Picked this up on friday night, Had a problem getting it fired up initially but that was due to user error in the form of not having enough pellets in the combustion chamber lol.

Green Mountain "Davy Crocket" Pellet smoker.

**cheesy** · 09-11-2017, 08:45 PM

A new dipstick for the Ural. Threads on the old one are just about gone.

08-18-2017, 07:32 PM	#618
BlackBike Join Date: Feb 2016 Location: George West, Texas Posts: 4,097	[QUOTE=bogieboy;263728]https://www.milwaukeetool.com/power-...rdless/2420-22 Hehe..... AKA...THE MASTER KEY __________________ ***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
	0

08-19-2017, 08:59 AM	#620
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,809	Two different locking gas caps for the Ural. One is a keyed Stant and the other is a pop up. Same thread as vented Harley tank. Whodathunkit? __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

08-20-2017, 06:39 PM	#621
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,809	Went to Harbor Freights' Parking Lot Sale on a whim today. Browsed the 'As-Is' section. Everything with an orange price tag was 50% off the price on the tag. So, scored an electric sheet metal shear for $10. Also found a hand held band saw $50. The shear was NIB, the box was beat to hell, though. Tried it for grins on a piece of 26ga and it went through it like butter. Supposed to handle up to 18ga. I don't usually work with anything above 20ga, so it should work fine. Maybe my cuts will be straight now. Or worse. The band saw was definitely used and refurbished, but works a charm. Keeping this in the back of the shop truck. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

08-26-2017, 07:22 AM	#623
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,809	Pretty pin spanners, bogie. Nice that you can get a square drive on them. I find that most supplied spanners are too short to be of any use. Ended up using a Sugino bb locking tool on the shocks on both bikes. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

09-08-2017, 02:55 PM	#625
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,569	Dual Fuel Carb I picked up a Dual Fuel Carb for $24.99 for my Wen 4750 Generator. With all the Hurricanes and being in Hurricane alley I want to be prepared. I'm setting it up to run on natural gas so I don't have to worry about getting gasoline to run for a week. I've been through a few major hurricanes in my life and have been without power for as long as 3 weeks. I'll still have gasoline on hand if for some reason they shut off the gas lines. Most conversion kits are $180 and up and are a lot more involved in setting up. This one can be install in 15-20 minutes. I can also run on propane if needed. I already have my electrical panel set up with an interlock so I don't accidently back feed into the main lines. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 This is similar to what I have set up except I made mine from a piece of Lexan that I had laying around. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 09-11-2017 at 08:17 AM.
	1

08-17-2017, 06:17 PM	#616
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,045	https://www.milwaukeetool.com/power-...rdless/2420-22 Hehe.....
	0

08-17-2017, 06:18 PM	#617
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,045	On a somber note though, i sold my kawasaki ke100 tonight..... i havent ridden it in 4 yrs.... was time to let it get used.......
	0

08-19-2017, 06:21 AM	#619
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,045	Yep....... used it yesterday to get me a $25 draw tite hitch from the scrapyard..... 2 bolts spun the nut inserts out of the frame and held it hostage...... cut right thru them grade 10.9 bolts....hehehe
	1

08-25-2017, 12:00 PM	#622
bogieboy Join Date: May 2013 Location: finger lakes NY Posts: 2,045	lets see.... yesterday i bought a new set of calipers and soft lines for my dakota (thanks to a seized caliper and a bad hose, causing a small fire in the wheelwell ) and scooby (my forester) was getting jealous that he didnt get anything so i bought him a nice set of coilovers! he responded as such :
	1

09-08-2017, 04:13 PM	#626
Megadan Join Date: Apr 2017 Location: Omaha, NE Posts: 8,030	New tires for my Hawk. Currently waiting for them to be installed (free mount/balance with purchase). I also ordered the front and rear sprockets for my 520 chain conversion. __________________ Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124
	1

09-08-2017, 10:22 PM	#627
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,809	Three Hall Effect Sensors. Just because. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0

09-09-2017, 12:26 AM	#628
pete Join Date: Jan 2012 Location: ChCh , NZ Posts: 2,261	A small fortune in frameing timber... To meany bikes in the shed & no room to work on them so I have to work on them out side but theres been a lot of rain this winter... So going to put another 3.5m X 4.2m section on the rear just for working on them & get a lift table as some stage.. . __________________ 09 XT660R ... 06 TTR250 ... 80 Montesa H6 125 Enduro... 77 Montesa Cota 348 MRR "Malcom Rathnell Replica"... Current resto projects.. 81 Honda CT110... 80 Kawasaki KL250A1... 11 Husaburg TE125 enduro... "sold" along with another 31... Lifan 125 Pitbike.. "stolen" ... KIWI BIKER FORUM...... http://www.kiwibiker.co.nz/forums/content.php All the best offroad rides in NZ... http://www.remotemoto.com/ E-mail... xtpete1@gmail.com
	2

09-11-2017, 08:45 PM	#630
cheesy Moderator Join Date: Jul 2010 Location: Elburn, IL Posts: 5,809	A new dipstick for the Ural. Threads on the old one are just about gone. __________________ Cheesy ______________________________________ 07 Hi Bird Enduro-Flown the Coop 07 Ural Gear Up 79 Honda CX500 77 VeloSolex 4600 V3 73 VeloSolex 3800 I'm making this up as I go.-Indiana Jones Telling me something 'is for my own good', is a fast way to a fat lip.-Me I don't even care about my own problems, why should I care about yours?-Quote on one of my favorite t-shirts
	0