LOTS of LIFAN GY-5 parts AND motor parts - Page 5

pchitti · 05-08-2014, 06:17 PM

Im only looking for one. lol If you run across any 8mm, take a pic. I might just snag one or two right side.

Wild_Alaskan · 05-08-2014, 06:49 PM

it just happens I have one that is standard thread 8mm that I bought on accident a long time ago, I can get a picture a bit later.

pchitti · 05-08-2014, 07:10 PM

yes sir, I did the opposite. Ordered a 10mm and now have adapters on the way... lol

Wild_Alaskan · 05-09-2014, 02:46 AM

is this the kind you are looking for

pchitti · 05-09-2014, 05:06 PM

really cant see it in the pic.

carguyty · 05-10-2014, 07:42 PM

Quote:

Originally Posted by Wild_Alaskan

now that i have looked at the bike, those triangles holding the pegs may take a bit of work as is, one is still stock but the other is about an inch shorter on the bottom and more material will have to be added to it. when i put the 400cc motor in it a section of frame it mounted to was moved back.

If you still want them let me know

Thanks for checking up on it. I'll just fab something.

yodaddy · 06-05-2014, 08:52 PM

Wild_Alaskan - do you have a speedometer / tach assembly ?

Wild_Alaskan · 07-07-2015, 09:20 PM

Last chance on these parts, still have some odds and ends left, the rest will be tossed in about a month.

Weldangrind · 07-08-2015, 11:33 AM

Please update us on what you have, WA.

alex_in_az · 07-08-2015, 02:39 PM

Quote:

Originally Posted by Wild_Alaskan

Last chance on these parts, still have some odds and ends left, the rest will be tossed in about a month.

any chance you have a 18" rear wheel with disk brake on it?

Wild_Alaskan · 07-08-2015, 04:37 PM

no good rear wheel parts.I will try and make a list tonight.

Wild_Alaskan · 07-08-2015, 09:59 PM

here is all I have

BODY

One gas tank with two keys
two side covers (front halfs only)
Right side gas tank shroud (red)
both sides gas tank shroud in aluminum black diamond plate
Bar pad
mirror (right side)
mechanical tach and speedo cluster no ignition
electric tach an mechanical speedo cluster no ignition
throttle tube and housing

FRAME

one heavy duty chain adjuster
one slightly modified chain adjuster
speedo cluster mount
complete triple clamps
forks, no leaks, questionable dampening action
exhaust heat shield
front brake caliper
rear brake drum
front wheel
seat release mechanism
rear wheel spacer

ENGINE/ELECTRICAL

One complete engine BAD CYLINDER, HEAD, VALVES, SPROCKET COVER. CAN REMOVE ANY NEEDED PARTS
One possibly working wiring harness
Carburetor
intake
two 4 pin regulator rectifiers

Wild_Alaskan · 07-08-2015, 10:02 PM

You can have any or all of it for pretty much the cost of shipping.

rich_e · 08-06-2015, 12:06 PM

Can you measure the mounting points on the front brake caliper bracket? Need about 60MM between the bolts where they mount to the fork (left side). Just noticed my hi-bird only has on bolt in it. The second one doesn't line up, someone changed it.

Edit: Well heck, if you've still got the forks and wheel, I may as well just take the entire assembly. That'll solve my issue. If you remove the springs and compress the forks, it should reduce the box size and shipping costs.

Wild_Alaskan · 08-06-2015, 11:13 PM

Sorry all these parts are gone.

05-08-2014, 06:49 PM	#62
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	it just happens I have one that is standard thread 8mm that I bought on accident a long time ago, I can get a picture a bit later. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-09-2014, 02:46 AM	#64
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	is this the kind you are looking for __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

07-07-2015, 09:20 PM	#68
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	Last chance on these parts, still have some odds and ends left, the rest will be tossed in about a month. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

07-08-2015, 11:33 AM	#69
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Please update us on what you have, WA. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

07-08-2015, 04:37 PM	#71
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	no good rear wheel parts.I will try and make a list tonight. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

05-08-2014, 06:17 PM	#61
pchitti Join Date: Mar 2014 Posts: 165	Im only looking for one. lol If you run across any 8mm, take a pic. I might just snag one or two right side.
	0

05-08-2014, 07:10 PM	#63
pchitti Join Date: Mar 2014 Posts: 165	yes sir, I did the opposite. Ordered a 10mm and now have adapters on the way... lol
	0

05-09-2014, 05:06 PM	#65
pchitti Join Date: Mar 2014 Posts: 165	really cant see it in the pic.
	0

06-05-2014, 08:52 PM	#67
yodaddy Join Date: Jun 2014 Posts: 7	Wild_Alaskan - do you have a speedometer / tach assembly ?
	0

07-08-2015, 09:59 PM	#72
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	here is all I have BODY One gas tank with two keys two side covers (front halfs only) Right side gas tank shroud (red) both sides gas tank shroud in aluminum black diamond plate Bar pad mirror (right side) mechanical tach and speedo cluster no ignition electric tach an mechanical speedo cluster no ignition throttle tube and housing FRAME one heavy duty chain adjuster one slightly modified chain adjuster speedo cluster mount complete triple clamps forks, no leaks, questionable dampening action exhaust heat shield front brake caliper rear brake drum front wheel seat release mechanism rear wheel spacer ENGINE/ELECTRICAL One complete engine BAD CYLINDER, HEAD, VALVES, SPROCKET COVER. CAN REMOVE ANY NEEDED PARTS One possibly working wiring harness Carburetor intake two 4 pin regulator rectifiers __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

07-08-2015, 10:02 PM	#73
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	You can have any or all of it for pretty much the cost of shipping. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0

08-06-2015, 12:06 PM	#74
rich_e Join Date: Nov 2007 Location: Kansas, USA Posts: 228	Can you measure the mounting points on the front brake caliper bracket? Need about 60MM between the bolts where they mount to the fork (left side). Just noticed my hi-bird only has on bolt in it. The second one doesn't line up, someone changed it. Edit: Well heck, if you've still got the forks and wheel, I may as well just take the entire assembly. That'll solve my issue. If you remove the springs and compress the forks, it should reduce the box size and shipping costs. __________________ 2000 HD XL1200C 2006 Hi-Bird QH-250-GY 2004 150CC Dual Sport (Chongqing Xgjao) 1978 Honda CB750K 1977 Honda GL-1000 (Goldwing) Project/Parts bikes 1977 Honda CB-750K 1977 Honda CB-550F Last edited by rich_e; 08-06-2015 at 01:10 PM.
	0

08-06-2015, 11:13 PM	#75
Wild_Alaskan Join Date: Dec 2009 Location: Alaska Posts: 914	Sorry all these parts are gone. __________________ Dune buggy build http://chinariders.net/modules.php?n...wtopic&t=14470 400cc lifan build vid: http://youtu.be/20HoU8OK_Y0 other fun: http://tinyurl.com/wildalaskan
	0