|
03-16-2023, 12:16 PM | #1 |
Join Date: Dec 2022
Location: Ohio
Posts: 30
|
Bike is almost here!
Well, I changed my order from a Templar X, to the M, since it came back in stock. Plus, I really wanted a kickstart backup (old school habits). It arrives, tomorrow! I did get the assembly, etc. Still, I am going to go through it, and check it all out; threadlock, adjust, tweak, etc. I'll post pics, asap. I definitely, will be taking out the rim locks, changing out the stock battery, and eventually, getting different tires, amongst other things.. I appreciate the advice, y'all have given me, and welcome more help.
|
|
03-16-2023, 06:29 PM | #2 |
Join Date: Oct 2020
Location: Central VA
Posts: 1,259
|
Got a chance to GPS with the 14/49.. max speed on speedo was 77mph, downhill.. on level 70mph should be doable. GPS corrected is a loss of 5mph.. so max corrected at 72mph.. 65mph should be considered the max speed overall I'd say.
__________________
2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X |
|
03-17-2023, 07:58 AM | #3 |
Join Date: Oct 2020
Location: Central VA
Posts: 1,259
|
One thing i'll add with this setup compared to the 13/42 is that on the same road, previously on a paved incline section in 6th she'd decelerate so much up the hill that i'd need to downshift to 5th.. with the 14/49, although she decelerated considerable, it did hold its ground and i did not need to downshift.. also alot more seat of the pants twist on the dirt which is fun..
On another note.. has anyone hit a rev limit? i know i was over 8k and no limit
__________________
2024 Zuma Storm 150 DLX 2019 Beta 430 RRS 2018 VStrom 1000 XT Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X |
|
12-29-2022, 05:05 AM | #4 |
Join Date: Feb 2021
Location: Kansas City
Posts: 2,362
|
I found mine had no gasket either. I used red RTV, 600 degree high temp gasket maker. A narrow bead was enough, it mounts flat and a bit squoze out, cleaned up easy before it dried.
It's back together. But still no large idle screw. Ali shipping means 4 weeks! By the way, the carb is much easier to install with the rear shock off ! No need for a heat gun or hair dryer |
|
|
|
|
|