Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 01-19-2022, 03:53 PM   #76
Lee1991   Lee1991 is offline
 
Join Date: Dec 2021
Posts: 51
I received my titan 250 today and have some quick questions for you all. First the key was broken off in the ignition so they are sending me a new key and ignition. Has anyone ordered from powersports max and had issues like this? Do they resolve the issues quickly?
Second powersports max lists the titan250 model as the DB-X34 but all my paperwork that came with my bike lists the model as the DB88? anyone else have this issue?

thanks for the help,
Lee


 
Reply With Quote
Old 01-19-2022, 04:15 PM   #77
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
Quote:
Originally Posted by Lee1991 View Post
I received my titan 250 today and have some quick questions for you all. First the key was broken off in the ignition so they are sending me a new key and ignition. Has anyone ordered from powersports max and had issues like this? Do they resolve the issues quickly?
Second powersports max lists the titan250 model as the DB-X34 but all my paperwork that came with my bike lists the model as the DB88? anyone else have this issue?

thanks for the help,
Lee
A DB88 would be a 110cc Apollo dirt bike.
__________________
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 01-19-2022, 04:23 PM   #78
Lee1991   Lee1991 is offline
 
Join Date: Dec 2021
Posts: 51
Thats my worry exactly. The paper work says DB88 250. The bike looks correct though. Just worried they screwed something up. Is there a engine size stamp anywhere on these bikes?


 
Reply With Quote
Old 01-19-2022, 04:41 PM   #79
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
More than likely it's a misprint. The two bikes are completely different in size. The DB88 will have smaller 12"/14' wheels with a horizontal single cylinder. If your bike looks like the one on there website, then you have the right bike. Post a picture of the bike.
__________________
2024 Linhai 300 ATV 4x4
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S (Sold)
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 01-19-2022, 04:54 PM   #80
Lee1991   Lee1991 is offline
 
Join Date: Dec 2021
Posts: 51
Ok will do hear shortly. Anyone also change out the ignition switch on their bike? wondering how much of a pain it will be.


 
Reply With Quote
Old 01-19-2022, 05:09 PM   #81
KSSK   KSSK is offline
 
Join Date: Oct 2021
Posts: 99
Quote:
Originally Posted by Lee1991 View Post
Second powersports max lists the titan250 model as the DB-X34 but all my paperwork that came with my bike lists the model as the DB88? anyone else have this issue?
Did they send you an MCO for a different customer? Does the VIN on the MCO match your bike?

If the VIN matches, the model number probably doesn't matter that much.

If it's the wrong VIN, then you need a new MCO.


 
Reply With Quote
Old 01-19-2022, 06:00 PM   #82
Lee1991   Lee1991 is offline
 
Join Date: Dec 2021
Posts: 51
Ok so the vins match between the paper work and the bike. Having issues loading the photos but it’s definitely a titan I think haha.


 
Reply With Quote
Old 01-19-2022, 08:54 PM   #83
tknj99   tknj99 is offline
 
Join Date: Oct 2020
Location: Central VA
Posts: 1,301
I purchased mine from PSM as well and you can see the condition the bike was delivered in on the first page of this thread. For those damages, they refunded me $30 since they claimed they didnt have any of the parts in stock. i asked for a replacement seat and fork caps and exhaust pipe at the time lol so figured it'd be a long shot... but they were quick to send me the refund. Also, i had an issue with the side rear blinker which they quickly shipped out to me as well.. overall, im satisfied with their support.. much better than TXPower lol
__________________
2024 Templar 250
2021 Beta 500 RRS
2018 VStrom 1000 XT

Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X, Storm DLX 150


 
Reply With Quote
Old 01-19-2022, 09:14 PM   #84
Lee1991   Lee1991 is offline
 
Join Date: Dec 2021
Posts: 51
Ok good news. Hopefully I can get this ignition and key thing figured out so I can give it a test. What was the model listed on your paperwork.


 
Reply With Quote
Old 01-21-2022, 11:26 AM   #85
GlennR   GlennR is offline
 
Join Date: Oct 2013
Location: Boone, NC
Posts: 188
Quote:
Originally Posted by Lee1991 View Post
Ok good news. Hopefully I can get this ignition and key thing figured out so I can give it a test. What was the model listed on your paperwork.

It's very simple. I just replaced one on my Chinese bike that was cutting out while riding. I swapped it for an OEM Honda one which was an exact fit. Now I have a Honda key!

It cost about 4x more than a Chinese one but has a much nicer "click" feel to it.


 
Reply With Quote
Old 01-21-2022, 11:46 AM   #86
GlennR   GlennR is offline
 
Join Date: Oct 2013
Location: Boone, NC
Posts: 188
Quote:
Originally Posted by Plump Kibbles View Post
At first, I installed the blue 'racing CDI': https://www.amazon.com/Glixal-ATMT1-...5046976&sr=8-5

With that one, I did notice a little pickup with the stock pipe and baffle out on the muffler. The baffle is just a decibel reducer, sorta. But does add a few MPH when taken out - like 2.. but hey, more!

Now - without the catalytic converter and EGR / SAI, the fuel rate is MUCH more rich and all the exhaust gasses are exiting the pipe. The EGR / SAI crap pushes dirty air back through your intake. But, with the stock catted muffler I was on a 120 main jet - switched pipes and was waaaaaaaaaaaaaaay too rich. The orange CDI just fits better and matches the color so, but between the orange and blue CDI's I can't tell a difference.

The exhaust pipe on this bike is kinda strange - very weird shape, and all one piece.. no middle pipe and doesn't bolt to the frame in the middle - just on the exhaust port engine side and the muffler... that's it!! The stoneman exhaust and the Power Core exhausts won't fit this bike - I have a power core 2 full exhaust just lying around unused. Didn't feel like trying to bend it either.

It's not in the pics, but where the shift lever is engine side, the pipe was rubbing against it. I took the pipe off, saw where the lever was rubbing the pipe, took it out in the shop, placed a piece of wood under the opposite side of the shift lever marks, and beat the s#!* out of it with a hammer Now there's PLENTY of room for the shift lever to move! Haha.. I think I can list that under 'custom build' when reselling - right? The CDI also has an effect with the aftermarket plug coil too - big, big spark lol I am also running the NGK Iridium DRP8EiX-9 plug; stock is NGK D8EA, too! Didn't know that before buying. But does seem to be better than stock.

Thanks though, man! Though, I may have to keep up with tknj99 on the internal mods! I haven't performed any internal upgrades yet. I really want to try that 280cc big bore kit though - see what this thing can do with more powa!!


Is there really a 280cc big bore kit available for this engine? If so, that seems like the first mod to make.

My Kayo K6 uses KTM plastics, seat, and gas tank. I installed a 4.1 gallon Acerbis tank. That might fit your bike too. (btw, I filled the tank with very hot water and used a ratchet strap to squeeze it down, making it quite a bit narrower.)

I recently ordered a Seat Concepts seat to replace the 2x4" hard stock seat. The wait was about 3 months because of C-19, but I just received the tracking info yesterday so it's finally on the way. Now I'll be able to use up the 4.1 gallons, instead of my butt crying after the 1st hour.

If these bikes use the KTM shaped seat pan the Seat Concepts swap is a great upgrade. Have any of you guys checked to see if any KTM or other big brand parts fit these bikes? If so, it'll open up a nice assortment of quality upgrades. (Some might not be an exact fit, but a trim or tweak here or there might make them work.)


 
Reply With Quote
Old 01-21-2022, 08:01 PM   #87
Lee1991   Lee1991 is offline
 
Join Date: Dec 2021
Posts: 51
Is full choke up or down on the stock carb? My manual doesn’t mention it.


 
Reply With Quote
Old 01-21-2022, 08:46 PM   #88
tknj99   tknj99 is offline
 
Join Date: Oct 2020
Location: Central VA
Posts: 1,301
Full choke is up and fuel petcock is backwards to usual so handle side up is normal operation
__________________
2024 Templar 250
2021 Beta 500 RRS
2018 VStrom 1000 XT

Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X, Storm DLX 150


 
Reply With Quote
Old 01-23-2022, 09:58 AM   #89
Lee1991   Lee1991 is offline
 
Join Date: Dec 2021
Posts: 51
Awesome thanks! I’m pumped and this thing is awesome. I just received my orange CDI, iridium plug, and carb in the mail. Hopefully get those all in in the next week. When you did your initial oil change did you change the filter? And what filters do you all use.

My manual seems completely useless in my initial pass. Doesn’t even list my engine anywhere in it.


 
Reply With Quote
Old 01-24-2022, 06:49 AM   #90
tknj99   tknj99 is offline
 
Join Date: Oct 2020
Location: Central VA
Posts: 1,301
There is no filter and the oil change is simple. On the clutch side of the bike you'll find the oil cap. When removed the oil will drain and you can clean the metal strainer if needed (held in place with a spring)
__________________
2024 Templar 250
2021 Beta 500 RRS
2018 VStrom 1000 XT

Former China Bikes: Tao DBX1, Brozz 250, CSC RX4, Titan DLX, Templar X, Storm DLX 150


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:38 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.