Rear carriers & luggage racks

[1cylinderwonder]

I need some help in locating an after market rear carrier or luggage rack for my stripped down RX3 that does not have a rear luggage or tail bag rack or plate to mount a soft or hard tail bag. I'm looking for a tail bag rack that will attach to existing mounting points on my RX3.
I'll be thankful for any suggestions.

[DanKearney]

I have the rear rack and panniers from my 2015 RX3 which I removed when I purchased the Tourfella set-up. I moved the trunk over to my TT250.

If you want the remaining rack and panniers you can have them for $50.00 plus the cost of shipping. There might be a few of the mounting bolts missing, but should be easily replaceable.

Cheers,

Dan K.

[1cylinderwonder]

Originally Posted by DanKearney

I have the rear rack and panniers from my 2015 RX3 which I removed when I purchased the Tourfella set-up. I moved the trunk over to my TT250.
If you want the remaining rack and panniers you can have them for $50.00 plus the cost of shipping. There might be a few of the mounting bolts missing, but should be easily replaceable.
Cheers,
Dan K.

Dan,
It sounds like you transferred the parts I'm looking for to your TT250.
Thanks for the offer, but I'm only interested in the rear rack trunk mounting bracket. No need for panniers or side racks for panniers.
I want to only mount a rear top box or soft bag to a rear rack behind the passenger seat. Don't want to widen the width of the bike.
If I'm wrong, and you have and want to sell just the trunk mounting bracket, I'm interested. Attached photo of item similar to what I'm looking for.

1CW

[DanKearney]

No worries. Good luck.

Dan K.

[jbfla]

Can't you purchase one of the racks in the photo from CSC?

jb

[1cylinderwonder]

Originally Posted by jbfla

Can't you purchase one of the racks in the photo from CSC?
jb

jb,
You are correct. It's part number CSC-1105.
It was just kind of convoluted finding it on CSC's website.
But, thanks for your help.

[elevatorman]

Will the rear rack from the RX3 also fit a Hawk 250.
The TT250 appears to have similar grab rails to the Hawk
and I'm wondering about using this on my Hawk.

[SpudRider]

Originally Posted by elevatorman

Will the rear rack from the RX3 also fit a Hawk 250.
The TT250 appears to have similar grab rails to the Hawk
and I'm wondering about using this on my Hawk.

I suggest you send a personal message to forum member 2LZ. He owns two RX3 bikes and a CSC TT250, so he should be able to compare the mounting points between the two models.