Go Back   ChinaRiders Forums > Technical/Performance > ATVs
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 07-22-2018, 08:31 PM   #1
kpb   kpb is offline
 
Join Date: Mar 2018
Posts: 5
Not that deep, but that air intake for the cooling is at the lower part of the engine and it just seems like it would plug up or ??? Not concerned about the actual engine air intake, just the cooling fan.


 
Reply With Quote
Old 10-06-2018, 06:11 PM   #2
Fumblecopter   Fumblecopter is offline
 
Join Date: Apr 2018
Posts: 62
Exhaust leak at head

My bolts holding the exhaust on the head rattled loose and after tightening them it still leaks...anyone know what gasket is a good replacement?


 
Reply With Quote
Old 10-11-2018, 10:45 AM   #3
Paul2   Paul2 is offline
 
Join Date: Jun 2017
Posts: 81
Hmmm, I have the same as you and times wonder the point of water as well in the cooling fan.
Its also really low and not protected.


 
Reply With Quote
Old 10-11-2018, 12:21 PM   #4
FLASHLIGHTBOY   FLASHLIGHTBOY is offline
 
Join Date: May 2009
Location: SASKATOON
Posts: 1,161
studs

there should be studs in there.... you have to remove t he nuts.. then tighten the studs into the head so they are good and tight,,, then put the nuts on there,,, the heat will not let locktight would due to the high heat temp.. so made sure they are bottom out and tight,,, then you can put lock washers on or self locking nuts ... or double the nuts if you can get them on... you can always put longer studs so you can double nut it..
__________________
DEALER FOR ZSTAR & GIO PRODUCTS, TAOTAO
ABIBABA ATV ETC


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:44 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.