Great Price on H4 55W/60 Bulbs

[roots]

That's a good deal Spud. I installed a Phillips MotoVision 9003 bulb (DOT approved) within a week of getting my bike, so I don't have an immediate need (original is my backup). It seems to work pretty well and has caused no issues yet (electrical or heat), even with being 60/67W. However, I haven't used my high beam for extended periods, so it hasn't been pushed to the extreme yet. It costs about 10 times as much as your posted deal.

I would be interested to hear if the bulbs you receive are actually 9003 with the DOT marking.

[SpudRider]

Originally Posted by roots

That's a good deal Spud. I installed a Phillips MotoVision 9003 bulb (DOT approved) within a week of getting my bike, so I don't have an immediate need (original is my backup). It seems to work pretty well and has caused no issues yet (electrical or heat), even with being 60/67W. However, I haven't used my high beam for extended periods, so it hasn't been pushed to the extreme yet. It costs about 10 times as much as your posted deal.

I would be interested to hear if the bulbs you receive are actually 9003 with the DOT marking.

About five years ago I ordered ten, Eiko 01009, H4 bulbs for about the same price. I now own three motorcycles which use H4 headlight bulbs, and I am finally down to my last bulb. The Eiko 01009 bulbs have the H4 stamp on them.

I was going to order the Eiko 01009 bulbs again, but the price has almost doubled for them. Therefore, I ordered these bulbs. As long as they illuminate the road well, I don't care if they have the DOT stamp.

After the bulbs arrive, I will report how well they work, and if they have DOT approval.

[Louis Angel]

dang! I paid more than that for TWO of those! Great find!!!!

[fishman10]

i installed the new 60w h4 bulbs in my original headlight assembly on the rx3 an switched it out ,,cause the L.E>D> one was not cutting it ,,other than it looked cool. First off the bulb is not marked DOT as someone had asked ,,,But it throw light great!!! i can now see safely at night ,,will have to see if it gets too hot for the plastic housing.

[woodlandsprite]

Originally Posted by fishman10

i installed the new 60w h4 bulbs in my original headlight assembly on the rx3 an switched it out ,, it throw light great!!!

so glad to hear this - my box of bulbs arrived the other day - I'm pondering fussing with my hand guards a bit, but figure I should also take the opportunity to swap the bulbs - the stock one is very dim - I've been trying to remind myself to ride with my LED aux lights on for visibility to other traffic during the day.