VW Beetle

Darkrider · 10-02-2019, 02:41 PM

As i mentioned in the What did you buy thread i got this beetle in a trade. I do not mention the year in the thread simply because it is a rough guess at this point if it is a '72. I will confirm the vin when i get some free time. But for now some pics as we all like pics.

The car currently has no engine as the friend i got it from originally bought it as an engine donor for his VW Bus. And well it has a clean interior other then missing the rear seat and half of the passenger side bucket seat. It is still a solid platform to build on.

As i mentioned in the aforementioned WDYB thread the plan is probably going to end up being a mix of Class 11 Baja along with some rat rod and Mad Max. Now if i somehow manage to lay hands on a Bug Eye Baja kit that will change the front end design a bit. But for now i am probably going to end up with more of a home brew "Wide eye" design.

This is a Bug eye

And this is a wideeye

**JerryHawk250** · 10-02-2019, 02:43 PM

just looking at the tail lights i'd say it's a 72. I had the wide eye kit.

Darkrider · 10-02-2019, 02:43 PM

The home brew idea i have in mind is fabricating fenders similar to the ones on a Bug eye but mounting the headlights to the front bumper similar to the offroad lights on the Wide eye in the pic above. Of course the headlights would be spaced out to clear the stock trunk lid.

**JerryHawk250** · 10-02-2019, 03:09 PM

I was just searching kits and parts for the VW. WOW!! that stuff has gotten crazy expensive. lol I remember paying about $60 for the big bore kit. I picked you the dual weber carbs with intake for $150. Was used once on a sand rail. The guy flipped the sand rail over backwards pulling a wheelie so he went back to single carb. Baja kit was $160. Headers, and other misc. part probably another $200-250 bucks. Tires and rims where given to me. I even installed a used after market AC for another $100. There was a VW mechanic shop about 2 blocks from me. Had lots of used beetles and bus to pick parts from. This was in the early to mid 80's. So i'm telling my age. lol

**JerryHawk250** · 10-02-2019, 03:36 PM

The fiberglass Baja kits will shave a lot of weight off. The front was so light that I could grab the nerf bar bumper and lift it and slide it sideways. It won't take much more HP to pull wheelies.

**JerryHawk250** · 10-02-2019, 07:08 PM

I found one picture before it was completed. I had just painted it a few days before. I know I have more boxed up somewhere. Remember this was before digital cameras. 😆

Darkrider · 10-02-2019, 09:37 PM

Yea it is insane how much prices have gone up on bug parts. Nice baja Jerry!

So i had a fun lil idea pop up for this. And it will def fit with the mad max idea. The idea itself is simple. Fab up the front fenders out of some aluminum strips and old licence plates. Seen something similar on another baja when i was looking around on google awhile ago.

Darkrider · 10-02-2019, 09:50 PM

Here is that bug i found on google.

**JerryHawk250** · 10-02-2019, 10:29 PM

That's pretty close to how my buddy had his. He painted his a bright orange. He kept the original hood and cut the stock fenders and mounted the head lights in chrome buckets almost in the same location.

Weldangrind · 10-03-2019, 11:33 AM

I recently saw a build on Youtube where a bug body was dropped onto a Miata chassis. Good use for a Miata, I say.
I'm also intrigued by the number of Subaru swaps into VW's. You suddenly have fuel injection, a cooling system and a decent charging system.

Darkrider · 10-03-2019, 01:56 PM

Quote:

Originally Posted by Weldangrind

I recently saw a build on Youtube where a bug body was dropped onto a Miata chassis. Good use for a Miata, I say.
I'm also intrigued by the number of Subaru swaps into VW's. You suddenly have fuel injection, a cooling system and a decent charging system.

I have given some thought to the idea of a subi swap. Now a new wrinkle has appeared with this project. Seems i may now need to factor in the ability to have a baby seat in it lol

**cheesy** · 10-03-2019, 03:34 PM

Quote:

Originally Posted by Darkrider

Now a new wrinkle has appeared with this project. Seems i may now need to factor in the ability to have a baby seat in it lol

Part of me is going to be a smart ass and say, “How did that happen?

Another part will be part fatherly(start practicing)and part Scouting. “Your life will change in ways you didn’t think possible.” And “Be Prepared. There ain’t no RTFM to read.”

Darkrider · 10-03-2019, 04:59 PM

Quote:

Originally Posted by cheesy

Part of me is going to be a smart ass and say, “How did that happen?

Another part will be part fatherly(start practicing)and part Scouting. “Your life will change in ways you didn’t think possible.” And “Be Prepared. There ain’t no RTFM to read.”

To answer the smart ass part of this, It was planned so the surprise is more of the "Holy shit it actually is happening" kind of reaction. As for the rest, Oh i am quite sure it will...and as for being prepared...yea..def going to need to work on that... I am still trying to wrap my head around it as it is.

Weldangrind · 10-04-2019, 10:40 AM

Chris, that is fantastic! Congratulations!

wheelbender6 · 10-05-2019, 09:57 PM

Cool. My dad had a Karmann Ghia for a few years but never had a beetle. The Ghia had no gas gauge, but had a lever to open the reserve fuel, Like a motorcycle.

10-02-2019, 02:43 PM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,569	just looking at the tail lights i'd say it's a 72. I had the wide eye kit. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

10-02-2019, 03:09 PM	#4
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,569	I was just searching kits and parts for the VW. WOW!! that stuff has gotten crazy expensive. lol I remember paying about $60 for the big bore kit. I picked you the dual weber carbs with intake for $150. Was used once on a sand rail. The guy flipped the sand rail over backwards pulling a wheelie so he went back to single carb. Baja kit was $160. Headers, and other misc. part probably another $200-250 bucks. Tires and rims where given to me. I even installed a used after market AC for another $100. There was a VW mechanic shop about 2 blocks from me. Had lots of used beetles and bus to pick parts from. This was in the early to mid 80's. So i'm telling my age. lol __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 10-03-2019 at 09:36 AM.
	0

10-02-2019, 03:36 PM	#5
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,569	The fiberglass Baja kits will shave a lot of weight off. The front was so light that I could grab the nerf bar bumper and lift it and slide it sideways. It won't take much more HP to pull wheelies. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 10-03-2019 at 09:36 AM.
	0

10-02-2019, 10:29 PM	#9
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,569	That's pretty close to how my buddy had his. He painted his a bright orange. He kept the original hood and cut the stock fenders and mounted the head lights in chrome buckets almost in the same location. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel Last edited by JerryHawk250; 10-03-2019 at 08:51 AM.
	0

10-03-2019, 11:33 AM	#10
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I recently saw a build on Youtube where a bug body was dropped onto a Miata chassis. Good use for a Miata, I say. I'm also intrigued by the number of Subaru swaps into VW's. You suddenly have fuel injection, a cooling system and a decent charging system. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	1

10-04-2019, 10:40 AM	#14
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Chris, that is fantastic! Congratulations! __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

10-05-2019, 09:57 PM	#15
wheelbender6 Join Date: May 2015 Location: Houston area Posts: 1,902	Cool. My dad had a Karmann Ghia for a few years but never had a beetle. The Ghia had no gas gauge, but had a lever to open the reserve fuel, Like a motorcycle. __________________ "Its not WHAT you ride; its THAT you ride"
	0