Boom Vader Headlight Swap

JadenHamilton · 06-06-2023, 02:18 AM

I was going down this one lane road and a moving truck made me go off into a ditch, the headlight on my Vader is busted up and I’ve been holding it on by zip ties. This thing is an absolute beast I’ve put 3k miles on it in a month and a half and got it going 65 easy, it’s mind blowing this thing is holding up. I’m looking for advice on swapping the headlight to a universal round headlight with integrated blinkers from Amazon. Any tips? Should it be fairly straight forward? I haven’t wired anything before. Anyone done anything of the sorts?

4T_Goblin · 06-06-2023, 07:55 AM

Yes it's possible and easy, I did it on mine.

Deckard_Cain · 06-06-2023, 09:29 AM

I also did it.. universal mounts, just match wire functions... figure out how to mount your turn signals if they aren't integrated into the headlight.

JadenHamilton · 06-06-2023, 09:38 PM

Quote:

Originally Posted by 4T_Goblin

Yes it's possible and easy, I did it on mine.

I’ve seen the ninjalini that’s the first thing I found! Sweet lil ride! I ordered this light are there any additional adapters or things I need? Will I use the h4 adapter?

https://a.co/d/dNVRwTs%5B/IMG%5D

JadenHamilton · 06-06-2023, 09:39 PM

Here’s the right link for the headlight I ordered

BLIAUTO 7 Inch Round LED Motorcycle Headlight with Housing Bucket Amber Turn Signal Lights & White DRL Angle Eyes 7" Motorcycle Headlight for H-arley Yamaha Kawasaki Honda Street Bike Front Headlamp https://a.co/d/iI52GM5

4T_Goblin · 06-07-2023, 08:47 AM

I bought a 5.75" headlight, link in the thread. I got an adapter ring to hold the light. The wiring is straight forward, just make sure you get the proper connectors. The hd4 connector does not connect to anything on the Vader harness. You'll need to adapt the light to the Vader connector. Easy

06-06-2023, 02:18 AM	#1
JadenHamilton Join Date: Jun 2023 Posts: 6	Boom Vader Headlight Swap I was going down this one lane road and a moving truck made me go off into a ditch, the headlight on my Vader is busted up and I’ve been holding it on by zip ties. This thing is an absolute beast I’ve put 3k miles on it in a month and a half and got it going 65 easy, it’s mind blowing this thing is holding up. I’m looking for advice on swapping the headlight to a universal round headlight with integrated blinkers from Amazon. Any tips? Should it be fairly straight forward? I haven’t wired anything before. Anyone done anything of the sorts?
	0

06-06-2023, 07:55 AM	#2
4T_Goblin Join Date: Jun 2021 Posts: 239	Yes it's possible and easy, I did it on mine. __________________ 2020 Vader X-Pro X-7 2019 Kawasaki Ninja ex400 2022 Lifan KPX 250
	0

06-07-2023, 08:47 AM	#6
4T_Goblin Join Date: Jun 2021 Posts: 239	I bought a 5.75" headlight, link in the thread. I got an adapter ring to hold the light. The wiring is straight forward, just make sure you get the proper connectors. The hd4 connector does not connect to anything on the Vader harness. You'll need to adapt the light to the Vader connector. Easy __________________ 2020 Vader X-Pro X-7 2019 Kawasaki Ninja ex400 2022 Lifan KPX 250 Last edited by 4T_Goblin; 06-07-2023 at 11:02 AM.
	0

06-06-2023, 09:29 AM	#3
Deckard_Cain Join Date: Aug 2019 Location: Bay City, MI Posts: 397	I also did it.. universal mounts, just match wire functions... figure out how to mount your turn signals if they aren't integrated into the headlight.
	0

06-06-2023, 09:39 PM	#5
JadenHamilton Join Date: Jun 2023 Posts: 6	Here’s the right link for the headlight I ordered BLIAUTO 7 Inch Round LED Motorcycle Headlight with Housing Bucket Amber Turn Signal Lights & White DRL Angle Eyes 7" Motorcycle Headlight for H-arley Yamaha Kawasaki Honda Street Bike Front Headlamp https://a.co/d/iI52GM5
	0