|
03-12-2018, 09:28 PM | #1 | |
Join Date: Dec 2017
Posts: 216
|
Quote:
|
|
|
03-18-2018, 05:47 PM | #2 |
Join Date: Feb 2018
Posts: 14
|
Unfortunately the kit I bought did not come with the head, only the piston and cylinder. The Yoshi exhaust I ordered for a grom does not fit either 😠. I just ordered a couple different stainless mandrel bends for a 1.5 inch exhaust so I'll cut up the new grom header and weld a new downpipe to match the Vader head.
|
|
03-18-2018, 09:39 PM | #3 | |
Join Date: Dec 2017
Posts: 216
|
Quote:
|
|
|
03-27-2018, 02:28 AM | #4 | |
Join Date: Mar 2018
Posts: 4
|
Quote:
1. Groms Exhaust port is on a slightly different angle 2. The Studs on the Exhaust port are a different size Ive read somewhere else that you can use a NCC PIPE ADAPTER and change out the studs on the exhaust port to accept the full Honda Grom Exhaust setup in case anyone was interested. Disclaimer: I have not tried this myself but it seems like a feasible pretty cheap option to try before cutting things up. |
|
|
08-12-2018, 07:38 PM | #5 |
Join Date: Aug 2018
Posts: 1
|
Do you happen to know the part number for the big bore kit you ordered from TBolt?
|
|
|
|
|
|