Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Reply
 
Thread Tools Search this Thread Display Modes
Old 07-15-2018, 07:45 PM   #1531
Tw   Tw is offline
 
Join Date: Jul 2018
Posts: 3
Where can I get a manual for a 250 Roketa 2010 dirt bike


 
Reply With Quote
Old 08-26-2019, 02:38 AM   #1532
Nikko Ski   Nikko Ski is offline
 
Join Date: Aug 2019
Location: Bellevue
Posts: 3
New CSC TT250 owner, as of June 2019...Got to be the funniest thread on this site...

I just joined and have never been part of a forum...ever, but after researching the CSC TT250 on-line, buying one and then reading this specific thread, I had to comment. I started last night reading all of your posts to this thread, dated back to around 2016. I couldn't stop reading all of the NEW-BUYERS comments who put money down and then waited...waited and waited, for their bikes to arrive. Although mine only took about 7 days to arrive, I felt your pain during the thread-read. Anyway, just wanted to say hi and that your comments were very entertaining and it was like reading a good book, hard to put the book down. On a side note, my bike is awesome, especially after replacing the main jet to a 110. Now I have smooth power past 5800 rpm to the end. Nikko


 
Reply With Quote
Old 08-26-2019, 08:24 AM   #1533
JerryHawk250   JerryHawk250 is offline
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,450
Quote:
Originally Posted by Nikko Ski View Post
I just joined and have never been part of a forum...ever, but after researching the CSC TT250 on-line, buying one and then reading this specific thread, I had to comment. I started last night reading all of your posts to this thread, dated back to around 2016. I couldn't stop reading all of the NEW-BUYERS comments who put money down and then waited...waited and waited, for their bikes to arrive. Although mine only took about 7 days to arrive, I felt your pain during the thread-read. Anyway, just wanted to say hi and that your comments were very entertaining and it was like reading a good book, hard to put the book down. On a side note, my bike is awesome, especially after replacing the main jet to a 110. Now I have smooth power past 5800 rpm to the end. Nikko
Welcome aboard! I was a long time lurker too before joining. I became a member when I bought my Hawk. This site had prepared me on what to look out for on the hawk. So no big surprises once I got it. Lots of good info on here.
__________________
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2020 Venom Ghost 250
105main,40pilot,17/36 sprockets,NGK DPR8EIX-9
2016 Black Hawk 250
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 08-26-2019, 08:55 AM   #1534
wedooit   wedooit is offline
 
wedooit's Avatar
 
Join Date: Jun 2018
Location: Pocatello, Idaho
Posts: 794
Welcome Nikko!! Post some pixs and give us a write up!!!
__________________
A family that works together, plays together, shoots and trains together, and sleds together, stays together. Second amendment! SkiDoo sleds, NOW 2 TTR225, and a BMS250. A couple of quotes (we are not farmers) "I don't get off the farm much" "Am too old school" I call the china bikes "the china syndrome".


 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:40 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.