Anyone Know Of Dong Fang DF250RTB Bobber? - Page 11

Barnone · 06-07-2014, 05:19 PM

The DF comes with a pumper Deni PZ30 which I think is a clone of the Keihin.

culcune · 06-07-2014, 09:02 PM

From your photo on mychinamoto of the Keihin carb from ebay, it looks just like the Sheng Way PZ30 that is on my TMEC 200, as well.

Barnone · 06-10-2014, 07:45 AM

Quote:

Originally Posted by culcune

From your photo on mychinamoto of the Keihin carb from ebay, it looks just like the Sheng Way PZ30 that is on my TMEC 200, as well.

I wonder how many different Chinese clones there are of the Keihin PZs? It must be a good design. The spare that I bought off Ebay has Keihin Japan on it.

Barnone · 06-26-2014, 07:23 AM

Making a run to the dump and recycling center.
Great riding here in the mountains of Western North Carolina.

Weldangrind · 06-27-2014, 10:01 AM

I like your trunk. Where did you find it?

Barnone · 06-27-2014, 02:42 PM

Not sure where I got it as I have had it a long time on different bikes.
One like it here
http://www.amazon.com/Emgo-72-32440-...box+motorcycle

Weldangrind · 07-02-2014, 12:43 AM

Ok, it's much like the trunks I have. It looked bigger in your pic. Thanks for the link.

Barnone · 07-02-2014, 08:42 AM

It is a smaller one that seems more in place on the DF but will still hold my helmet at a stop.
I've got some bar end turn signals that I might install and then I can fit some ammo cans that I also have at hand. Then I can carry more stuff.

Barnone · 08-09-2014, 08:44 AM

Painted my DF flat black and redid the rear rack.
She is running good.

Took a photographer for a ride on the Dragon in my Ural so she could take some travel photos for the Our State magazine.
http://www.advrider.com/forums/showt...4662&page=2064

Weldangrind · 08-09-2014, 01:05 PM

Vince, that flat black looks menacing! Nice job of it. How do you deal with fuel on a flat painted tank? Is it 2K, single stage or rattle can? If it's rattle can, what did you use?

I'd sure like to get ahold of that counterbalanced motor.

Barnone · 08-09-2014, 04:05 PM

Quote:

Originally Posted by Weldangrind

Vince, that flat black looks menacing! Nice job of it. How do you deal with fuel on a flat painted tank? Is it 2K, single stage or rattle can? If it's rattle can, what did you use?

I'd sure like to get ahold of that counterbalanced motor.

Thanks.
It is a rattle can engine paint that I had in the paint locker.
From
http://www.amazon.com/Rust-Oleum-248...k+engine+paint
Fuel spill, just respray.
I gonna spray it with a satin black eventually.

On the way to the garbage dump and then to the gym.

Weldangrind · 08-10-2014, 12:37 AM

I think you might have shown us before, but may we see a close-up pic of the hitch?

Barnone · 08-10-2014, 09:28 AM

Weld,
I'll have to take a photo of the mount on my DF but here is the site where I bought the trailer eight years ago. Photos of the mount there and attached.

It has been use on about five different of my motorcycles/scooters. Now has the pit bike wheels but I never had a failure with the BMX bicycle tires.
Real handy for hauling but use at your own risk. Might poke your eye out.
The canvas on the trailer is getting a little ragged but still going good.

http://www.aosom.com/d-12/Aosom-Larg...ailer-Red.html

Barnone · 08-15-2014, 07:33 AM

Just repainted the DF with Satin Canyon Black.
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
A motorcycle painter suggested satin black because he says it looks like an old finish which is the look I am after.
I'll post some photos later.

Barnone · 08-15-2014, 11:05 PM

Trying a Satin Black paint job plus I installed an oil cooler that seems to be working.
The radiator gets hot and it took an extra 200 cc of oil for the lines and the cooler.

06-07-2014, 09:02 PM	#152
culcune Join Date: May 2006 Location: Yuma, Arizona Posts: 9,035	From your photo on mychinamoto of the Keihin carb from ebay, it looks just like the Sheng Way PZ30 that is on my TMEC 200, as well. __________________ "They say that life's a carousel, spinning fast you got to ride it well..." TGB Delivery Scooter 150 TMEC 200 Enduro--carcass is sadly rotting in the backyard
	0

06-26-2014, 07:23 AM	#154
Barnone Join Date: Feb 2007 Posts: 1,351	Making a run to the dump and recycling center. Great riding here in the mountains of Western North Carolina. Last edited by Barnone; 07-13-2019 at 09:13 PM.
	0

06-27-2014, 10:01 AM	#155
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I like your trunk. Where did you find it? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

07-02-2014, 12:43 AM	#157
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Ok, it's much like the trunks I have. It looked bigger in your pic. Thanks for the link. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-09-2014, 08:44 AM	#159
Barnone Join Date: Feb 2007 Posts: 1,351	Painted my DF flat black and redid the rear rack. She is running good. Took a photographer for a ride on the Dragon in my Ural so she could take some travel photos for the Our State magazine. http://www.advrider.com/forums/showt...4662&page=2064 Last edited by Barnone; 07-13-2019 at 09:13 PM.
	0

06-07-2014, 05:19 PM	#151
Barnone Join Date: Feb 2007 Posts: 1,351	The DF comes with a pumper Deni PZ30 which I think is a clone of the Keihin.
	0

06-27-2014, 02:42 PM	#156
Barnone Join Date: Feb 2007 Posts: 1,351	Not sure where I got it as I have had it a long time on different bikes. One like it here http://www.amazon.com/Emgo-72-32440-...box+motorcycle
	0

07-02-2014, 08:42 AM	#158
Barnone Join Date: Feb 2007 Posts: 1,351	It is a smaller one that seems more in place on the DF but will still hold my helmet at a stop. I've got some bar end turn signals that I might install and then I can fit some ammo cans that I also have at hand. Then I can carry more stuff.
	0

08-09-2014, 01:05 PM	#160
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Vince, that flat black looks menacing! Nice job of it. How do you deal with fuel on a flat painted tank? Is it 2K, single stage or rattle can? If it's rattle can, what did you use? I'd sure like to get ahold of that counterbalanced motor. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-10-2014, 12:37 AM	#162
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I think you might have shown us before, but may we see a close-up pic of the hitch? __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

08-10-2014, 09:28 AM	#163
Barnone Join Date: Feb 2007 Posts: 1,351	Weld, I'll have to take a photo of the mount on my DF but here is the site where I bought the trailer eight years ago. Photos of the mount there and attached. It has been use on about five different of my motorcycles/scooters. Now has the pit bike wheels but I never had a failure with the BMX bicycle tires. Real handy for hauling but use at your own risk. Might poke your eye out. The canvas on the trailer is getting a little ragged but still going good. http://www.aosom.com/d-12/Aosom-Larg...ailer-Red.html Last edited by Barnone; 07-13-2019 at 09:13 PM.
	0

08-15-2014, 07:33 AM	#164
Barnone Join Date: Feb 2007 Posts: 1,351	Just repainted the DF with Satin Canyon Black. http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1 A motorcycle painter suggested satin black because he says it looks like an old finish which is the look I am after. I'll post some photos later.
	0

08-15-2014, 11:05 PM	#165
Barnone Join Date: Feb 2007 Posts: 1,351	Trying a Satin Black paint job plus I installed an oil cooler that seems to be working. The radiator gets hot and it took an extra 200 cc of oil for the lines and the cooler. Last edited by Barnone; 07-13-2019 at 09:13 PM.
	0