Garmin on the RX3...The Chinariders way!

[fjmartin]

I've been trying and trying to use my iPhone as a GPS on the motorcycle. Works great for road rides but the screen size, brightness and decent apps for following GPS GPX tracks for mostly offroad have been really frustrating. I've tried all the high rated apps and none fit the bill. So, I decided to research Garmin GPS's for the bike and found the motorcycle specific ones are REALLY expensive. So then with some more research I found a cool solution that I'm now using. It goes like this:

1 - I purchased a refurbished Garmin Nuvi 57LM off Amazon for $80.
The Nuvi series are for cars you say...sure, but they don't have to be.

2 - OpenStreetMaps is an open/free platform with awesome worldwide coverage for roads, topo and marine. They are even routable and have ton's of POI's(Points of Interest). There are a bunch of websites available and tools to get OSM on your Garmin.
http://garmin.openstreetmap.nl/
http://osm.thkukuk.de/
http://www.raumbezug.eu/osm-garmin_en.htm
https://www.gpsfiledepot.com/
http://www.gmaptool.eu/en
https://www.openmapchest.org/
With these websites and their tools you can download just about any region in the world for road or topo that's routable in the IMG format the Garmin GPS's wants AND you can download the installer or build an installer to install the maps into MapSource and BaseCamp. MS and BC are Garmin free tools for creating waypoints, tracks, routes and adventures and put them on the GPS. It also allows you to control what maps are loaded on the GPS.

3 - I stuck a 32GB Micro-SD card that I already had a bunch of from my gopro type cameras into the Garmin and then stuck on 20 different maps I wanted. I did this as the Nuvi 57LM does come with lifetime maps but only for North America and only for Roads. Now I have maps for the world and have road and topo maps. Nice thing about OpenStreetMaps is anyone can be a contributor so the maps are very up to date. This winter we just opened up a new mountain bike trail about 20 miles from where I live. OSM has the trail on the topo map in detail!!! And the maps are FREE!!!!

4 - On the Nuvi you have activate more than one map at a time so if you want roads and topo for an area...no problem. The maps all looks really good on the screen.

5 - Next though you'd say that the Nuvi isn't waterproof. True, but you can make it very water resistant very easily. First, I put some 3M tape over the speaker and Micro-SD port. I put some dialectic grease in the USB port. I can still hear it beep loudly through the tape but don't really care since on the moto I can't hear anything! Good news is the unit is positioned where it's very easy to see and not miss turns. Next is where most of the water penetration threat comes in. From the edges of the screen down into the frame. This is an easy fix I found on Youtube. I took some blue painters tape and covered the entire screen except I left a millimeter or so exposed right up against the frame of the unit. I then took come cardboard and made a spatula and worked clear silicone into the edges. I wiped off the excess with some paper towels and peeled off the painters tape and let it dry. Now the front won't let water in. Finally as you'll see in the pictures, the position I put the Garmin is both easy to see and keeps it mostly behind and under the windscreen

6 - I mounted the garmin using an angled RAM Mount base which is connected to one of the windscreen bolts (middle left) and a tie wrap to keep it from twisting...see the pictures. I then put on a medium 3" RAM arm and a Nuvi 5X series RAM Mount with the diamond base.

7 - On the front of my bike I already had a dual USB port and a cig port. But, both USB ports are used for my iPhone and my Spot and the cig port is holding a temp/volt gauge so I added a 3rd USB port to the front. This time instead of running a wire all the way to the back of the bike and connecting into a switched set of pins on the big white block I plugged into the 12v switched port that is on the bike if you were to purchase the accessory plugs from CSC. It's the one on the left side of the bike. I dremeled down some spade clips to fit the narrow sockets and then used my hot melt glue gun to waterproof and hold them in place. The USB ports plug in is mounted to the metal plate at the base of the windscreen. You'll see it in the pictures.

8 - Next I needed to figure out how to use the Garmin. First was its basic functions of street use and that took about 5 minutes to figure out. Next I had to figure out how to load GPX routes on it and have them work how I'd want. MapSource and BaseCamp can be used but I generally use a free account on RideWithGPS to build routes and add waypoints for things like gas stations and such and then export them. I could get them then loaded into BaseCamp and could tell them to load onto the Garmin by converting the tracks to a route. The big thing I had to figure out beyond these basics was to have these routes set as "direct" routing rather than using intelligence for routing. Direct means that the Garmin will point you along the way of the GPX tracks rather than just trying to route you from waypoint to waypoint which won't work for most offroad rides.

I'm really happy with how this turned out and also how my dash cluster looks like the controls for the star ship Enterprise!

Total cost for the project was;
$80 - GPS
USB port - $11
RAM Arm - $10
Nuvi Mount - $13
RAM Diamond Base - $7
Hard case for storing the GPS - $10
32GB Micro SD which I already had but would cost $13
I already had the angled base on the bike but they are $12
$156

Here are some pictures, please let me know if you have any questions as I'm happy to help others with this.

http://s1042.photobucket.com/user/jo...%20Nuvi%2057LM

Take care!

Joe