It`s here

Whisky · 03-11-2019, 02:46 PM

Arrived a couple days ago and will be going in just as soon as the snow melts, can`t wait.

scoot newb · 03-11-2019, 03:56 PM

Awesome!

scoot newb · 03-13-2019, 12:11 AM

Did the snow melt yet? Which z190 is in the box?

Whisky · 03-13-2019, 01:39 AM

Quote:

Originally Posted by scoot newb

Did the snow melt yet? Which z190 is in the box?

Unfortunately no. It's a piranha. 751.00 shipped to my door, came with everything needed. Got a discount from the zs190 swap group on facebook. There's also a guy selling them for 650.00 on there but I wanted to purchase from the manufacturer.

scoot newb · 03-13-2019, 01:57 AM

Oh. I just joined the club. I see the offer for $650 shipped. 190cc GPX MOTO COMPLETE ENGINE KIT. So that is a piranha too?

Damn, I have it in the cart and i want to buy it but I just don't know if I will be able to install it. Which bike are you putting yours into?

Whisky · 03-13-2019, 08:15 AM

Its the exact same motor just a different dealer. I don't know what all comes with the $650. motor, might want to ask before buying. Its going in this

direct bolt in on all the china bikes, you use your wiring harness on your bike. there's 5 wires you have to match colors to yours plus there's lots of help on the zs facebook page if you have questions. It doesn't look to difficult to do as long as your staying with a carb. I'm also changing out the swing arm. but its not required to do.

MDStroup · 03-13-2019, 08:18 AM

I dont have facebook, and refuse to get one. Is there anyway to contact these guys outside of the group? Because $650 would make the swap alot better!

Can this version of the engine have the 4 valve head swapped onto it and a big bore kit installed?

Whisky · 03-13-2019, 08:22 AM

Yes on the 4v head and big bore making it 212cc. As far as I know I think you have to join the group. I'm not a fan of facebook either, the only reason I go on facebook is to this group and Clone army group and that's it. They all live in Vegas so if your near there, maybe also I read on there that you can buy a clone with the 190 installed for a couple thousand, there's also a few for sale on there and they are very nice. If I lived closer I probably would have bought one of them.

scoot newb · 03-13-2019, 08:30 AM

Quote:

Originally Posted by MDStroup

I dont have facebook, and refuse to get one. Is there anyway to contact these guys outside of the group? Because $650 would make the swap alot better!

Can this version of the engine have the 4 valve head swapped onto it and a big bore kit installed?

A link to the engine from the FB group

https://pitsterpro.com/index.php?rou...J9eI-jO3pKEZjw

coupon code "Zs190"

@Whisky your bike looks sick as it is. Just 5 wires?

Whisky · 03-13-2019, 08:31 AM

Heres one of the bikes forsale, its very nice imo $2000.00 has zs190

MDStroup · 03-13-2019, 08:32 AM

Quote:

Originally Posted by Whisky

Yes on the 4v head and big bore making it 212cc. As far as I know I think you have to join the group. I'm not a fan of facebook either, the only reason I go on facebook is to this group and Clone army group and that's it. They all live in Vegas so if your near there, maybe also I read on there that you can buy a clone with the 190 installed for a couple thousand, there's also a few for sale on there and they are very nice. If I lived closer I probably would have bought one of them.

I am as far away from them as i can get. I am all the way over in Virginia! That sucks to hear.

I have always wondered if a Kymco K-pipe could handle this engine. That is the swap i would love to make!

scoot newb · 03-13-2019, 08:33 AM

Quote:

Originally Posted by Whisky

Heres one of the bikes forsale, its very nice imo $2000.00

After seeing the bikes there for sale I was regretting buying one new. But most of them were 1000's of miles away.

Whisky · 03-13-2019, 08:35 AM

you can try using the link above but I don't know if the group checks to see if your a member or not to get the discount? These guys that have these motors bought like 10 or more and paid 350.-400. ea for them and sale them for a profit, the kicker is you have to buy 10 or more. The one I bought was not from an individual person.

scoot newb · 03-13-2019, 08:38 AM

Quote:

Originally Posted by Whisky

you can try using the link above but I don't know if the group checks to see if your a member or not to get the discount?

I was able to get that price in the cart before putting in any of my information. I never checked out though.

MDStroup · 03-13-2019, 08:38 AM

Quote:

Originally Posted by scoot newb

A link to the engine from the FB group

https://pitsterpro.com/index.php?rou...J9eI-jO3pKEZjw

coupon code "Zs190"

@Whisky your bike looks sick as it is. Just 5 wires?

You are awesome!!! How long does that code last for?

Now i am pissed for not picking up that mini bike here that had no engine!! Dont remember that make of it.

Also, does the tagging(@) feature actually work on this forum?

03-11-2019, 02:46 PM	#1
Whisky Join Date: Aug 2018 Posts: 286	It`s here Arrived a couple days ago and will be going in just as soon as the snow melts, can`t wait. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	4

03-13-2019, 08:15 AM	#6
Whisky Join Date: Aug 2018 Posts: 286	Its the exact same motor just a different dealer. I don't know what all comes with the $650. motor, might want to ask before buying. Its going in this direct bolt in on all the china bikes, you use your wiring harness on your bike. there's 5 wires you have to match colors to yours plus there's lots of help on the zs facebook page if you have questions. It doesn't look to difficult to do as long as your staying with a carb. I'm also changing out the swing arm. but its not required to do. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	2

03-13-2019, 08:22 AM	#8
Whisky Join Date: Aug 2018 Posts: 286	Yes on the 4v head and big bore making it 212cc. As far as I know I think you have to join the group. I'm not a fan of facebook either, the only reason I go on facebook is to this group and Clone army group and that's it. They all live in Vegas so if your near there, maybe also I read on there that you can buy a clone with the 190 installed for a couple thousand, there's also a few for sale on there and they are very nice. If I lived closer I probably would have bought one of them. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

03-13-2019, 08:31 AM	#10
Whisky Join Date: Aug 2018 Posts: 286	Heres one of the bikes forsale, its very nice imo $2000.00 has zs190 __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

03-13-2019, 08:35 AM	#13
Whisky Join Date: Aug 2018 Posts: 286	you can try using the link above but I don't know if the group checks to see if your a member or not to get the discount? These guys that have these motors bought like 10 or more and paid 350.-400. ea for them and sale them for a profit, the kicker is you have to buy 10 or more. The one I bought was not from an individual person. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

03-11-2019, 03:56 PM	#2
scoot newb Join Date: Sep 2018 Posts: 403	Awesome!
	0

03-13-2019, 12:11 AM	#3
scoot newb Join Date: Sep 2018 Posts: 403	Did the snow melt yet? Which z190 is in the box?
	0

03-13-2019, 01:57 AM	#5
scoot newb Join Date: Sep 2018 Posts: 403	Oh. I just joined the club. I see the offer for $650 shipped. 190cc GPX MOTO COMPLETE ENGINE KIT. So that is a piranha too? Damn, I have it in the cart and i want to buy it but I just don't know if I will be able to install it. Which bike are you putting yours into?
	0

03-13-2019, 08:18 AM	#7
MDStroup Join Date: Apr 2016 Location: Chesapeake, VA Posts: 207	I dont have facebook, and refuse to get one. Is there anyway to contact these guys outside of the group? Because $650 would make the swap alot better! Can this version of the engine have the 4 valve head swapped onto it and a big bore kit installed?
	0