08-23-2017, 09:12 PM | #1 |
Join Date: Aug 2017
Posts: 2
|
Sega 250 enduro carb size
Just thought I would say hi to all
Being a new member. I have a 2009 sega 250 enduro that I bought new, rode it 2 seasons sorta, put 399 km on it, it has been sitting since then. I am in the process of getting it running again to get back into riding, but the carb is well fubar to say the least. Cleaned it the best that I can but the bike just won't idle or rev up worth a darn. I am not nearound the bike right now and on my tablet right now and the search engine on the site will not work for me. Anyone on this forum possibly know the size of carb that I would need to get for it, or a link to amazon or eBay, that will ship to Canada? I have found a few but just need to make sure that I am getting the right size. Thanks you in advance. Last edited by Manonfire; 08-23-2017 at 09:14 PM. Reason: Bad spelling lol |
|
08-23-2017, 09:29 PM | #3 |
Join Date: Mar 2008
Posts: 2,436
|
Take it apart & boil the jets http://chinariders.net/showthread.php?t=19698 if don't want to touch nasty chemical...
How to set-up: http://www.ccwthariders.com/uploads/...ing_manual.pdf === Typical size: Replace PZ30 w/ Mikuni VM26(& copycats) is a common mod...
__________________
Last edited by humanbeing; 08-23-2017 at 10:20 PM. |
|
08-24-2017, 05:53 PM | #4 |
Join Date: Aug 2017
Posts: 2
|
Hey thank you very much. Very helpful information, I will give that boiling tip a try. I do have a ultrasonic cleaner I was thinking of giving a go.
|
|
|
|
|
|