Go Back   ChinaRiders Forums > Technical/Performance > Pit/Pocket Bikes & Scooters
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 09-17-2019, 03:31 PM   #1
dirtbkr188   dirtbkr188 is offline
 
dirtbkr188's Avatar
 
Join Date: Aug 2009
Posts: 502
Since your Hellcat has a crank-mounted clutch, it should look similar to the one pictured below, after you've removed the right side engine cover.

Once you've removed the clutch cover and cleaned all the debris out, you might want to also clean the oil screen located just above the drain bolt. You can remove it with a set of needlenose pliers and flush it with contact or carb cleaner and reinstall. Its location is indicated by the red arrow in the picture.




 
Reply With Quote
Reply

Tags
engine, filter, hellcat, oil, taotao



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:53 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.