New Zongshen RX3 (ZS250GY-3) Dual Sport

[jezzrite]

Originally Posted by oldqwerty

Unless it reappears the next time it rains, or you ride through water, or a dog pees on the bike. Yes, pee happens. I think the Chinese have the right mindset about dogs. Yum!

Gave a new meaning to raining cats and dogs.

Originally Posted by detours

Maybe it's water-related, but some gear indicators require a really solid shift to activate. On my v-strom sometimes I'll be in gear but the indicator reads a dash. Happened more during break-in but less as I put on miles and started making more solid shifts.

The indicator disappeared while I was cruising on the same gear. I think it's water-related. Have to pray for another storm to test it again. BTW, thank you for the feedback.

On another case, the side panniers are definitely not waterproof. Waters leaked in from the same storm, but luckily for the left pannier, I put my stuff inside my Kriega US10 (didn't strap it at the back seat, because I was heading to an urban area with theft cases).

But for the right pannier, my tool roll was damp, and there were ponds of water inside it that dripped after I opened the pannier to check my stuff.

Tourfella perhaps? Checked TaoBao, but thinking of ordering racks only, to save up some courier fees.

[SpudRider]

Originally Posted by jezzrite

Gave a new meaning to raining cats and dogs.

The indicator disappeared while I was cruising on the same gear. I think it's water-related. Have to pray for another storm to test it again. BTW, thank you for the feedback.

On another case, the side panniers are definitely not waterproof. Waters leaked in from the same storm, but luckily for the left pannier, I put my stuff inside my Kriega US10 (didn't strap it at the back seat, because I was heading to an urban area with theft cases).

But for the right pannier, my tool roll was damp, and there were ponds of water inside it that dripped after I opened the pannier to check my stuff.

Tourfella perhaps? Checked TaoBao, but thinking of ordering racks only, to save up some courier fees.

Thanks for posting the update from Malaysia. We don't get monsoon rains in the United States. I'm sure you are testing the waterproof features of all parts of your motorcycle, not just the digital dashboard and luggage. If everything else is running well, I think you are proving the water-worthiness of the Zongshen RX3.

[katflap]

Reading In the CSC Baja blog about the bloke who lost his counter shaft sprocket nut I was a little surprised.

Not by the loss of the nut, but the fact that it was a nut and not a bolt.

Though I know the CSC RX3 has a number of upgrades / differences to the Honley RX3 (UK), I thought the engines were exactly the same.

This appears to not be the case

CSC RX3




Honley RX3

[Weldangrind]

Originally Posted by katflap

Reading In the CSC Baja blog about the bloke who lost his counter shaft sprocket nut I was a little surprised.

Not by the loss of the nut, but the fact that it was a nut and not a bolt.

Though I know the CSC RX3 has a number of upgrades / differences to the Honley RX3 (UK), I thought the engines were exactly the same.

This appears to not be the case

CSC RX3




Honley RX3

I'm failing to visualize how a bolt would hold your sprocket on. Can you post of pic of your installed sprocket for us?

[katflap]

Originally Posted by Weldangrind

I'm failing to visualize how a bolt would hold your sprocket on. Can you post of pic of your installed sprocket for us?

Here you go

[katflap]

The last time I had a bike with an adjustable rear shock was getting on for 25 years ago. If I remember correctly the bike manual had a table to refer to for setting it correctly.

If possible, could someone do an "Idiots Guide" that would be great

Or I will be stuck with doing months of something similar to this

[Weldangrind]

Originally Posted by katflap

Here you go

Thanks for the pic; that makes much more sense to me now.

[SpudRider]

Originally Posted by Weldangrind

I'm failing to visualize how a bolt would hold your sprocket on. Can you post of pic of your installed sprocket for us?

My Honda CRF250X also uses a bolt to attach the counter shaft sprocket.

[Weldangrind]

Originally Posted by SpudRider

My Honda CRF250X also uses a bolt to attach the counter shaft sprocket.

Interesting. I figured it would use two 8mm diameter bolts and a retainer.

[SpudRider]

Originally Posted by Weldangrind

Interesting. I figured it would use two 8mm diameter bolts and a retainer.

My CRF250X uses parts 19, 21, and 29, to secure the counter shaft sprocket to the counter shaft.

[SpudRider]

Originally Posted by katflap

Reading In the CSC Baja blog about the bloke who lost his counter shaft sprocket nut I was a little surprised.

Not by the loss of the nut, but the fact that it was a nut and not a bolt.

Though I know the CSC RX3 has a number of upgrades / differences to the Honley RX3 (UK), I thought the engines were exactly the same.

This appears to not be the case ...

You are correct. I just checked, and my RX3 uses a nut to hold the counter shaft sprocket.