Go Back   ChinaRiders Forums > Technical/Performance > Adventure Bikes > Zongshen RX3
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-28-2015, 12:45 PM   #1
katflap   katflap is offline
 
katflap's Avatar
 
Join Date: Jan 2015
Location: England
Posts: 382
Working With Diagnostic Data Cable & Software

UPDATE (June 2020)

The PCHUD software is now completely obsolete & has been superseded by the fully functional HUD ECU Hacker software.

Thanks goes to Raptorix (Elmüsoft) for creating & developing this new software.


Detailed description & download for the HUD ECU Hacker can be found here

https://netcult.ch/elmue/HUD%20ECU%20Hacker/


************************************************** *******

LINK UPDATE (2018)
See post 164 & 165 for PCHUD download

This is an all in one download that includes

PCHUD with instructions

"Clear fault codes" software with instructions

A guide to making your own data connection using a vag com cable

and other info




Requirements
----------------

1/
Data Cable
Name:  cablejpg.jpg
Views: 8789
Size:  61.1 KB

Taobao link

http://item.taobao.com/item.htm?id=39520023502

so far the only one known to work


2/
PC or laptop running Win7 (32bit), Tested

May work with other O.S. NOT 64bit

----------------------------------------------

The diagnostic software comes indirectly with the cable. If this is not the case, below is a link to the software I received (PCHUD)

https://mega.co.nz/#!skACACIT!Kv8o9g...KYCK-q08TiBUs8

The software is in Chinese, below is a link, in the download are files and instructions translated in to English. I will go in to more detail of these files further on in this post

https://mega.co.nz/#!wwgkDAwR!QzhC2n...cYKva96H8_KMuY


Installing USB drivers and running software
-------------------------------------------------

The translated instructions included in my link should do the trick, so i will only write an overview here.

The setup.exe for the USB drivers can be found in the "USB数据线驱动程序及安装指南" folder

Run the setup without the cable connected to your laptop

No installation is required for the PCHUD software

The folder "德尔福电脑检测软件(PCHud_Chinese)" needs to be renamed to PCHUD, then just place the folder in the root of the harddrive .

I used D:\ as described in the instructions, but probably would work else where if you edit the pchud.ini

Check the pchud.ini anyway to make sure the directory entries are correct.

---------------

Launch and experiment with the software without anything connected (run hud.exe)

The important data to load is the .par file, this holds all the parameter data. The VARI54CN.PAR file

is the one that you can see being used in the Delphi Scan Tool Manual (included in my download).

Unfortunately the VARI54CN.PAR is in chinese but i have done my best at translating it (3.par)

The .hud files are user configuration files for the gauges. You are able to create new ones from within the program.

so to get you started use -

3.hud with 3.par

or

1.hud with 1.par ( slightly different translation of VARI54CN.PAR)

Translating or editing of .par files yourself i will cover in a later post, but i have included a hex/text editor that will be required in my download)

----------------------------------------------------------

The Chinese TR125 (QJ125GY-16A) uses the Delphi MT05 , i have included the EFI section of the manual in my download.

The images show them using the MT05common.PAR as their parameter file.

For this use 2.hud with 2.par (slight variation on the MT05common.PAR)

----------------------------------------------------------

connecting up
---------------

with ignition off plug the cable into the bike, USB to laptop and run PCHUD.

make sure comports are configured, bike kill switch is to "run" turn on ignition.

"com time out error " should go after a short while, if not start engine and all should be good







apologies for the length of, post now completed



Last edited by katflap; 06-11-2020 at 09:11 AM. Reason: new download info
 
Reply With Quote
Old 05-28-2015, 02:00 PM   #2
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Thanks for posting this excellent thread, Kat.

My fifth order with Taobao is ready for shipment, but I am delaying it, because I am adding this cable to my order.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 05-28-2015, 02:28 PM   #3
katflap   katflap is offline
 
katflap's Avatar
 
Join Date: Jan 2015
Location: England
Posts: 382
Thanks Spud,

I'm still adding more stuff to my first post over the next few hours, fitting it in around other things i have to do, will mark it as completed when done

I also added the cable to an existing order, the agent received the cable very quickly, so in the end it was waiting on components to arrive for my existing order that held up the shipment.

I had 2 orders shipped at nearly the same time, this one got through, the other got caught in customs. so i will have to pay duty on that one


 
Reply With Quote
Old 05-28-2015, 03:50 PM   #4
katflap   katflap is offline
 
katflap's Avatar
 
Join Date: Jan 2015
Location: England
Posts: 382
Translating,Editing .par files

Open the .par file with M.S. Word , select other encoding Chinese simplified(EUC).
From here you can translate by copying in to google translate.

For editing ( software provided in 1st post download)

Open .par file , in the right hand column you will see sections of code strings.

select view, character set, International, Chinese simplified so you can match the chinese characters .

Note the start point , change back to ACSll and edit

TIP - 00 in the left hex column = nothing.

** this all takes forever to do**

If your editing one of my .par files , they are already in English.


 
Reply With Quote
Old 05-28-2015, 04:21 PM   #5
katflap   katflap is offline
 
katflap's Avatar
 
Join Date: Jan 2015
Location: England
Posts: 382
Simulating A Fault

I disconnected the O2 sensor to see what would happen.

as you can see in the pic it displayed that the fault light was on and recorded at fault number of 49.

This means from the table a P0031 fault, Oxygen sensor Heater high voltage.

Not quite what I was expecting but at least it was the right component



 
Reply With Quote
Old 05-28-2015, 04:52 PM   #6
rjmorel   rjmorel is offline
 
rjmorel's Avatar
 
Join Date: May 2007
Location: Warshington
Posts: 928
As a total nube what does this do for me and the bike? Is it for going in and changing parameters to make it a BMW or KTM? ) Need a 101 wannabe geek coarse for changing any of it. How and why? The rest of the mechanical things I can screw up all by myself. rj


 
Reply With Quote
Old 09-13-2018, 06:18 PM   #7
engtro   engtro is offline
 
Join Date: Sep 2018
Posts: 1
Quote:
Originally Posted by katflap View Post
Open the .par file with M.S. Word , select other encoding Chinese simplified(EUC).
From here you can translate by copying in to google translate.

For editing ( software provided in 1st post download)

Open .par file , in the right hand column you will see sections of code strings.

select view, character set, International, Chinese simplified so you can match the chinese characters .

Note the start point , change back to ACSll and edit

TIP - 00 in the left hex column = nothing.

** this all takes forever to do**

If your editing one of my .par files , they are already in English.
Hello dear Katflap,
I tried download link for first post but the link was offline. Could you share software for edit *.par files?


 
Reply With Quote
Old 05-28-2015, 06:23 PM   #8
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
You are certainly going to get more data from a computer than you will from an OBD2 scanner.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 05-08-2016, 02:13 PM   #9
dpl096   dpl096 is offline
 
dpl096's Avatar
 
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
BT Diagnostics

Kat;

Would something like this work with an adapter?
http://www.ebay.com/itm/BAFX-Bluetoo...699259&vxp=mtr

__________________
************************************************** ***

" Time you enjoy wasting, is not wasted." - John Lennon

“I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.”
― Thomas Jefferson

"If you don't know where you're going any road will take you there" ....George Harrison song


 
Reply With Quote
Old 05-08-2016, 02:33 PM   #10
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
Quote:
Originally Posted by dpl096 View Post
Kat;

Would something like this work with an adapter?
http://www.ebay.com/itm/BAFX-Bluetoo...699259&vxp=mtr
I doubt it will work. The Delphi MT05 ECU does not appear to be OBD2 compliant, or it would work with any OBD2 scanner, which it does not.

As far as I know, the Delphi MT05 controller is proven to communicate only with PCHUD software running on a Microsoft Windows computer, and these two, compatible scan tools.

1. Delphi Scan Tool KF90121
2. ED100 Motorcycle Scan Tool

PCHUD software is easily the least expensive, and most powerful tool for diagnosing the health of the Delphi MT05 ECU.
__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 05-08-2016, 03:45 PM   #11
dpl096   dpl096 is offline
 
dpl096's Avatar
 
Join Date: Sep 2015
Location: East Central Hellinois
Posts: 1,344
I still think it's a cool piece of hardware and software. Now I'm wondering about a windows tablet . Use it with the proper software and a cable .... there's a couple of windows based tablets on ebay for decent prices.
__________________
************************************************** ***

" Time you enjoy wasting, is not wasted." - John Lennon

“I predict future happiness for Americans, if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.”
― Thomas Jefferson

"If you don't know where you're going any road will take you there" ....George Harrison song


 
Reply With Quote
Old 05-10-2016, 09:06 AM   #12
katflap   katflap is offline
 
katflap's Avatar
 
Join Date: Jan 2015
Location: England
Posts: 382
Quote:
Originally Posted by dpl096 View Post
Kat;

Would something like this work with an adapter?
http://www.ebay.com/itm/BAFX-Bluetoo...699259&vxp=mtr

In addition to what spud has already said,

there have been a few people try a bluetooth connection but I believe without success. Also I have tried the Torque app with an android emulator with know success but admittedly it could be a connection issue between the com port and the emulator.


 
Reply With Quote
Old 05-29-2015, 01:24 AM   #13
Weldangrind   Weldangrind is offline
 
Weldangrind's Avatar
 
Join Date: Mar 2009
Location: Sardis, BC, Canada
Posts: 25,977
Quote:
Originally Posted by katflap View Post
apologies for the length of, post now completed
What???

Don't apologize for an awesome contribution like that! You're the man.
__________________
Weldangrind

"I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer


 
Reply With Quote
Old 05-29-2015, 01:30 AM   #14
SpudRider   SpudRider is offline
 
SpudRider's Avatar
 
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
He's not the Grand Poobah for nothing.

__________________
Spud

"Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain

2015 Zongshen ZS250GY-3 (RX3)
2006 Zongshen ZS200GY-2 (Sierra 200)
2005 Honda XR650L
2004 Honda CRF250X
1998 Kawasaki KDX220

Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894


 
Reply With Quote
Old 05-29-2015, 05:46 AM   #15
humanbeing   humanbeing is offline
 
humanbeing's Avatar
 
Join Date: Mar 2008
Posts: 2,436
VW cable (twenty-odd yuan) mod :http://www.chyangwa.net/forum.php?mo...uthorid=652893
__________________



Last edited by humanbeing; 04-21-2016 at 09:39 PM.
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:58 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.