Turn signal indicator upgrade

pyoungbl · 02-03-2020, 03:55 PM

You can make all the indicator lights brighter by removing the plastic mask. That mask has the symbols for what the lights are telling you. No mask and you just have colored lights and they are much brighter. It is simple enough to know that the blinking yellow is turn signal, solid red is oil pressure, solid orange is low fuel and blue is high beam.

To get to the mask you have to remove the instrument cluster, take the back off the cluster, unclip the mask, and reassemble.

Someone posted a much better description of this job but I have not found the link.

Peter Y.

02-03-2020, 03:55 PM	#3
pyoungbl Join Date: Feb 2016 Location: Portsmouth, Virginia, USA Posts: 632	You can make all the indicator lights brighter by removing the plastic mask. That mask has the symbols for what the lights are telling you. No mask and you just have colored lights and they are much brighter. It is simple enough to know that the blinking yellow is turn signal, solid red is oil pressure, solid orange is low fuel and blue is high beam. To get to the mask you have to remove the instrument cluster, take the back off the cluster, unclip the mask, and reassemble. Someone posted a much better description of this job but I have not found the link. Peter Y.
	2