|
05-08-2015, 12:06 AM | #1 |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
The battery looks great, as do the power outlets.
I think it is easier to install the windshield if you install the lowest bolts first. If necessary, install the windshield loosely before you install the headlight. Then it will be much easier to tighten the lowest bolts on the windshield.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
05-08-2015, 12:33 AM | #2 | |
Join Date: Jan 2015
Location: Phoenix, AZ
Posts: 267
|
Quote:
__________________
George 2016 CanAm Spyder F3-L |
|
|
05-08-2015, 12:52 AM | #3 |
Join Date: Sep 2014
Posts: 175
|
What happened to my oil?
When I got the new battery in, I started the engine for about 30 seconds. The oil in the sight glass went away, as expected. It's been 4 hours and nothing has drained back to the case. Did I do something wrong when I did the oil change? No leaks noted. I'll check again in the morning.
__________________
Honda CB300R ABS |
|
05-08-2015, 01:02 AM | #4 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
05-08-2015, 01:22 AM | #5 |
Join Date: Sep 2014
Posts: 175
|
I filled it to the full mark. If there is no oil indicated, I'll be calling CSC. Strange problem, indeed.
__________________
Honda CB300R ABS |
|
05-08-2015, 01:29 AM | #6 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
I simplify the process by measuring 1.7 quarts (55 ounces) of oil to add to the engine. Using this method, I know I have the correct quantity of oil. Of course, I verify the oil level is correct after running the engine, and checking the oil level in the sight glass.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
05-08-2015, 01:32 AM | #7 | |
Join Date: Sep 2014
Posts: 175
|
Quote:
__________________
Honda CB300R ABS |
|
|
05-08-2015, 01:00 AM | #8 | |
Join Date: Jul 2008
Location: Idaho
Posts: 25,054
|
Quote:
I made the mistake of installing the lowest bolts last, instead of first. I couldn't use needle nose pliers, or even a pair of tweezers to hold the nuts. Therefore, I had to resort to using a telescoping magnet to hold the nuts to get them started. http://www.harborfreight.com/18-inch...net-37187.html Install the lowest bolts of the windshield first.
__________________
Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894 |
|
|
|
|
|
|