05-07-2020, 08:45 AM
|
#2 |
Join Date: Apr 2020
Location: SLC, Utah
Posts: 83
|
Luckily, in this situation, you have two bikes. Can you compare connections on each and make sure all plugs are seated firmly and no contacts are bent?
Do any electrics work on the bike w/o a working speedo? If not, maybe the light fuse (on battery lead) or the ground connections are loose. General speedo ground can be found on a black wire under the right side fairing. IIRC it is connected near the starter relay (or at least, it was on my bike). |
|
|
05-07-2020, 11:32 AM
|
#3 |
|
Join Date: Jun 2018
Location: Florida
Posts: 759
|
If checking all the pins to make sure they are firmly seated in their connectors and that the connectors are all firmly connected doesn't work, i suggest checking the front wheel sensor assy - I understand you assembled 2 Bikes at the same time , but it really is super easy to put the sensor disc inside the wheel hub wrong side up, and the speedo wont work if you do. ( ask me how i know heh,)
__________________
2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L |
|
|
|
04-12-2022, 01:22 PM
|
#4 |
|
Join Date: Apr 2022
Posts: 3
|
I have the same issue. Removed wheel again to clean and inspect sensor, but it's fine. Still not working
|
|
|
|
|
|
 |
|
|
Linear Mode
