CSC SG400's Are Finally In - Page 5

Working_ZS · 09-25-2021, 10:33 AM

The bike came in last Friday, but I've been busy with some important home repairs, so I haven't had any time to get out on it; hopefully this weekend. I started a thread over in the 'Street' subforum, which has pictures:

http://www.chinariders.net/showthrea...d=1#post366759

ChopperCharles · 04-03-2022, 10:42 AM

For the record, even with a 30" inseam my knees really feel it after an hour or two in the saddle. The seat-to-peg distance is really tight on the SG400.

Charles.

ChopperCharles · 04-06-2022, 11:11 AM

Found out something interesting today. The SG400 alters the redline depending on the gear you're in. In 1st gear the redline is 9000. In 3rd gear it changes to 9500. I haven't tested above that yet, but I'll bet 10k doesn't start until 5th gear.

That's really unfortunate, I'm constantly bouncing off the rev limiter in first, and now I know why. I wonder if I can trick the ECU into thinking I'm always in 6th, without that affecting my gear indicator...

Charles.

wheelbender6 · 04-09-2022, 07:48 AM

ooops. Wrong thread. Sorry

ChopperCharles · 04-13-2022, 02:21 PM

Latest mods:

Chinahao to the rescue for the side covers and tank emblems. Still have the OEM "cyclone" wheel decals on the way.

Charles.

09-25-2021, 10:33 AM	#1
Working_ZS Join Date: Aug 2016 Posts: 365	It's Here The bike came in last Friday, but I've been busy with some important home repairs, so I haven't had any time to get out on it; hopefully this weekend. I started a thread over in the 'Street' subforum, which has pictures: http://www.chinariders.net/showthrea...d=1#post366759
	2

04-09-2022, 07:48 AM	#4
wheelbender6 Join Date: May 2015 Location: Houston area Posts: 1,902	ooops. Wrong thread. Sorry __________________ "Its not WHAT you ride; its THAT you ride"
	0

04-03-2022, 10:42 AM	#2
ChopperCharles Join Date: Feb 2018 Location: RDU, NC Posts: 677	For the record, even with a 30" inseam my knees really feel it after an hour or two in the saddle. The seat-to-peg distance is really tight on the SG400. Charles.
	1

04-06-2022, 11:11 AM	#3
ChopperCharles Join Date: Feb 2018 Location: RDU, NC Posts: 677	Found out something interesting today. The SG400 alters the redline depending on the gear you're in. In 1st gear the redline is 9000. In 3rd gear it changes to 9500. I haven't tested above that yet, but I'll bet 10k doesn't start until 5th gear. That's really unfortunate, I'm constantly bouncing off the rev limiter in first, and now I know why. I wonder if I can trick the ECU into thinking I'm always in 6th, without that affecting my gear indicator... Charles.
	0

04-13-2022, 02:21 PM	#5
ChopperCharles Join Date: Feb 2018 Location: RDU, NC Posts: 677	Latest mods: Chinahao to the rescue for the side covers and tank emblems. Still have the OEM "cyclone" wheel decals on the way. Charles.
	2