RX3 Starter Issue

Juanro · 12-18-2019, 11:25 AM

Are you in Argentina right now? There are many levels of qualities and parts to replace, depending on your Budget and how badly (if any) damaged is the sliding Surface of the plate gear Assy (part #16: https://store.cscmotorcycles.com/PLA...-p/z19-115.htm). In Buenos Aires en nearby cities there are also a few mechanics who know this bike well. If you use Facebook you can join our group (https://www.facebook.com/groups/touring250/) and take a look around or ask there.

a_hi · 12-18-2019, 12:51 PM

Hi Juanro, yes I'm currently in Cafayete. Unsure if I should try to hitch a ride with the bike back to Salta, or stay here and have a mechanic look at it. I doubt they will have parts in stock, so it might be a waste to take the bike apart here.

Got a new battery and installed it on the bike, but still no luck. The voltage of the new Bosch one was only 12.15 anyways.

I really just want a bike that runs.

Just requested to join the FB group, thanks for the invite.

12-18-2019, 11:25 AM	#1
Juanro Join Date: Oct 2015 Posts: 321	Are you in Argentina right now? There are many levels of qualities and parts to replace, depending on your Budget and how badly (if any) damaged is the sliding Surface of the plate gear Assy (part #16: https://store.cscmotorcycles.com/PLA...-p/z19-115.htm). In Buenos Aires en nearby cities there are also a few mechanics who know this bike well. If you use Facebook you can join our group (https://www.facebook.com/groups/touring250/) and take a look around or ask there.
	0

12-18-2019, 12:51 PM	#2
a_hi Join Date: Dec 2019 Posts: 18	Hi Juanro, yes I'm currently in Cafayete. Unsure if I should try to hitch a ride with the bike back to Salta, or stay here and have a mechanic look at it. I doubt they will have parts in stock, so it might be a waste to take the bike apart here. Got a new battery and installed it on the bike, but still no luck. The voltage of the new Bosch one was only 12.15 anyways. I really just want a bike that runs. Just requested to join the FB group, thanks for the invite.
	0