storm headlight

par1 · 03-29-2018, 09:14 PM

hi does any body know if i can change out the stalk headlight on a storm 250 for the one on the brozz ?

china007 · 03-30-2018, 12:24 AM

If it's the same is the enforcer then no. The wiring harnesses and front fender are all different and you have to make a new mount.

XDoubleXA · 03-30-2018, 12:02 PM

Yeah, I have a Bashan Shark and I can't find a plug and play LED for it.

par1 · 03-30-2018, 05:24 PM

thanks for the help.

par1 · 03-31-2018, 08:24 PM

i am looking to just change out the shroud for looks . i would not mind using the storms bulb and wiring.

humanbeing · 04-01-2018, 05:51 AM

Quote:

Originally Posted by XDoubleXA

...can't find a plug and play LED for it.

Good old HL is easy

Cravin01 · 04-01-2018, 11:00 AM

Humanbeing

Is that a kit ? do you have the link or tell me the name of it, HL ?

Cravin01 · 04-02-2018, 05:55 PM

Found it.

https://www.amazon.com/dp/B00UX5WRBM..._t2_B0764DSQRX

XDoubleXA · 04-05-2018, 07:37 AM

Quote:

Originally Posted by Cravin01

Found it.

https://www.amazon.com/dp/B00UX5WRBM..._t2_B0764DSQRX

Do you have to cut the wires on that, or will it just plug in?

Cravin01 · 04-05-2018, 11:11 AM

I don't know, I haven't bought it yet but it's only three wires to deal with so it should be simple enough. The part that mounts in the housing is the most important I'm guessing.

Cravin01 · 04-13-2018, 07:16 PM

This kit I bought has needed some modifications to make it work due to the Storms housing.

The mount with two tabs needed to be grinded down and glued in the housing to mount the Led, It does not lock in at all. the wire harness needs to be replaced also.

Make sure the Led is in a upright triangle when it is in the housing at the time you glue in the plastic mount.

The Led has two sides on a angle that are the low beam and the bottom is high, it must be positioned correctly.

I might replace the harness on the bike so I can just buy a replacement bulb and not rewire each time.

This is a really simple thing to do. I wouldn't let it stop you from upgrading and this kit has everything you need to do it.

03-29-2018, 09:14 PM	#1
par1 Join Date: Mar 2018 Posts: 8	storm headlight hi does any body know if i can change out the stalk headlight on a storm 250 for the one on the brozz ?
	0

03-30-2018, 12:24 AM	#2
china007 Join Date: Feb 2018 Posts: 68	If it's the same is the enforcer then no. The wiring harnesses and front fender are all different and you have to make a new mount.
	0

03-30-2018, 05:24 PM	#4
par1 Join Date: Mar 2018 Posts: 8	thanks for the help.
	0

03-31-2018, 08:24 PM	#5
par1 Join Date: Mar 2018 Posts: 8	i am looking to just change out the shroud for looks . i would not mind using the storms bulb and wiring.
	0

04-01-2018, 11:00 AM	#7
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	Humanbeing Is that a kit ? do you have the link or tell me the name of it, HL ?
	0

04-02-2018, 05:55 PM	#8
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	Found it. https://www.amazon.com/dp/B00UX5WRBM..._t2_B0764DSQRX
	0

04-05-2018, 11:11 AM	#10
Cravin01 Join Date: Jan 2018 Location: Forney Texas Posts: 498	I don't know, I haven't bought it yet but it's only three wires to deal with so it should be simple enough. The part that mounts in the housing is the most important I'm guessing.
	1