mikuni vm26 clone and tbr7

Wayward · 03-01-2021, 07:14 PM

Hi All,

I'm looking the name or a part # for vm26 mikuni clone. i need the part that will bring the throttle cable in at an angle..... maybe 90deg..

Regards,

Wayward

JerseyTBR7 · 03-02-2021, 10:33 AM

I just put the factory carb levers and cable holders transferred onto the Minkuni.

Works fine. No need to get fancy.

dirtbkr188 · 03-02-2021, 10:40 AM

Either one of these should work on the VM26-clone carb cap.

45° angle

90° angle

03-01-2021, 07:14 PM	#1
Wayward Join Date: Jun 2019 Location: Pierce Co, WA Posts: 5	mikuni vm26 clone and tbr7 Hi All, I'm looking the name or a part # for vm26 mikuni clone. i need the part that will bring the throttle cable in at an angle..... maybe 90deg.. Regards, Wayward
	0

03-02-2021, 10:33 AM	#2
JerseyTBR7 Join Date: Oct 2020 Posts: 130	I just put the factory carb levers and cable holders transferred onto the Minkuni. Works fine. No need to get fancy.
	0

03-02-2021, 10:40 AM	#3
dirtbkr188 Join Date: Aug 2009 Posts: 503	Either one of these should work on the VM26-clone carb cap. 45° angle 90° angle
	1