Go Back   ChinaRiders Forums > Technical/Performance > ATVs
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-15-2024, 05:00 PM   #1
Purch23   Purch23 is offline
 
Join Date: May 2024
Posts: 3
need help removing pins from connector

This is the stator wire connector for a Coolster 125cc quad 3125B2. I'm having a problem removing the pins from the connector. Any advice?





Thank you in advance for any help.
Dave


 
Reply With Quote
Old 05-16-2024, 09:08 AM   #2
GypsyR   GypsyR is offline
 
GypsyR's Avatar
 
Join Date: Feb 2023
Location: Upstate SC
Posts: 339
I didn't watch the video but looked at the picture. You need to pop the yellow piece out with a tiny screwdriver. It is the "lock" that keep s the pins in. The pins are latched by plastic bits you have to pry away from the pin while pulling on the wire. There are purpose made little release tools but you can usually get them with a small sharp pick. The latches are right under where the yellow "legs" are at the pins. The yellow pieces lock the latches by keeping them up against the pins. Once you figure out how to get the first one loose you'll be golden.
__________________
2023 Templar 250 X


 
Reply With Quote
Old 05-16-2024, 09:23 AM   #3
Aussie_in_MO   Aussie_in_MO is online now
 
Join Date: Feb 2024
Location: SW Missouri
Posts: 193
+1 on Gypsy's advice.
If the connector pins are relatively short you might try a cell phone sim card tray tool to pop the pin retention tab out of the way after removing the yellow part.
__________________
----------
2023 Templar X
2009 Triumph Bonneville
1976 Yamaha DT175
1974 Honda MT125


 
Reply With Quote
Old 05-16-2024, 01:10 PM   #4
Purch23   Purch23 is offline
 
Join Date: May 2024
Posts: 3
Thanks guys! Really appreciate it!



Last edited by Purch23; 05-16-2024 at 02:39 PM.
 
Reply With Quote
Old 05-16-2024, 02:03 PM   #5
J4Fun   J4Fun is offline
 
Join Date: May 2021
Posts: 358
A jeweler’s toolkit comes in handy, they’re on Amazon for for a very reasonable price. They sure have helped me on numerous occasions! My thoughts…


 
Reply With Quote
Old 05-17-2024, 08:08 AM   #6
Purch23   Purch23 is offline
 
Join Date: May 2024
Posts: 3
Quote:
Originally Posted by GypsyR View Post
I didn't watch the video but looked at the picture. You need to pop the yellow piece out with a tiny screwdriver. It is the "lock" that keep s the pins in. The pins are latched by plastic bits you have to pry away from the pin while pulling on the wire. There are purpose made little release tools but you can usually get them with a small sharp pick. The latches are right under where the yellow "legs" are at the pins. The yellow pieces lock the latches by keeping them up against the pins. Once you figure out how to get the first one loose you'll be golden.
That was it! Removed the yellow piece and pried the pins out. Thanks again!


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:56 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.