selling 2017 Venom x20 "vader2" $1250 'red'

imapdog · 08-10-2018, 12:04 PM

Attachment 13879

Attachment 13880

Attachment 13881

Attachment 13882

Attachment 13883new, assembled, modded, and tuned.
it has less than 20 miles for tuning purposes.
clean/clear tennessee title in my name and on hand.
pickup is in spring hill tennessee 37174.
no trades.
price is very firm.

Modifications done:
Brisk Racing spark plug
oil change
jtr 17tooth-428 front sprocket
jtr 34tooth-428 rear sprocket
jt chain-428
Mikuni vm22 carburetor kit
emissions delete
chrome piranha shorty exhaust(sounds good not too loud)
fender delete kit
photos are actual item
.................
blue will be avail in a week or two.

Chinabike · 08-10-2018, 02:54 PM

Thats a good deal.

**JerryHawk250** · 08-10-2018, 03:09 PM

Nice

And ready to roll. It doesn't get any better than that. All the hard work has been done.

kirbo7106 · 08-15-2018, 01:17 AM

710 miles from Holiday, Florida to Nashville, Tn! Now that’s a ride!

natti · 09-20-2018, 03:52 PM

Dang! This is looking nice!
I’m over in Georgia, I’d consider meeting half way, you still modding these bikes? /still available?

imapdog · 09-21-2018, 11:18 AM

Quote:

Originally Posted by natti

Dang! This is looking nice!
I’m over in Georgia, I’d consider meeting half way, you still modding these bikes? /still available?

sorry, sold out. didnt make $.....went through 6 of them. cool bikes but most thought buying a new stock one was better deal without knowing stock is sub par....wish i could see them peeps now....plus what does little ole me know about motorcycles right? i been flipping for 25 years but no credentials... i needed $1700 a piece to make worthwhile, $1250 was close to cost if not below, and took a while to unload the last two at $1250. of all the chondas and atv's i have flipped, i just ordered another magician 250 green. that was the one i want back....

cbrfxr67 · 09-21-2018, 05:17 PM

glws that's a great $!

Dexxx702 · 10-24-2018, 01:50 AM

Did that exhaust hook up whit no modification?

Chinabike · 10-24-2018, 02:38 AM

Quote:

Originally Posted by Dexxx702

Did that exhaust hook up whit no modification?

Ya. You just have to find a place to mount bracket to hold it up.
Others have use the bolt holes under engine.

imapdog · 10-24-2018, 08:20 AM

Quote:

Originally Posted by Chinabike

Ya. You just have to find a place to mount bracket to hold it up.
Others have use the bolt holes under engine.

i used one hole under engine. my piranha exhaust has one mounting bracket and one oblong hole on that bracket. i did cut off one end of that oblong hole. the exhaust comes with hardware kit in which i didnt use any of it.
i used 1" chrome spacer rubber and metal washers measured depth of engine hole(dont bottom out bolt) and thread count size. the bracket on the muffler only will connect on opened end using washer. i use 2x 32mm copper crush washers on the engine port.

08-10-2018, 12:04 PM	#1
imapdog Join Date: Feb 2018 Location: nashville Posts: 574	selling 2017 Venom x20 "vader2" $1250 'red' Attachment 13879 Attachment 13880 Attachment 13881 Attachment 13882 Attachment 13883new, assembled, modded, and tuned. it has less than 20 miles for tuning purposes. clean/clear tennessee title in my name and on hand. pickup is in spring hill tennessee 37174. no trades. price is very firm. Modifications done: Brisk Racing spark plug oil change jtr 17tooth-428 front sprocket jtr 34tooth-428 rear sprocket jt chain-428 Mikuni vm22 carburetor kit emissions delete chrome piranha shorty exhaust(sounds good not too loud) fender delete kit photos are actual item ................. blue will be avail in a week or two. Last edited by imapdog; 02-14-2020 at 08:48 AM.
	4

08-10-2018, 03:09 PM	#3
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,561	Nice And ready to roll. It doesn't get any better than that. All the hard work has been done. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	1

08-15-2018, 01:17 AM	#4
kirbo7106 Join Date: Feb 2017 Location: Holiday, Florida Posts: 672	710 miles from Holiday, Florida to Nashville, Tn! Now that’s a ride! __________________ Dan-O -2018 Tao Tao HellCat - DOA -2016 Hawk 250 - Kitty Hawk - eBay exhaust, Mikuni carb(120 main/30 Pilot), airbox mod with K&N filter, digital cluster, total LEDs, 17/45 sprockets, RK chain, Shinko 244 tires, trunk, aftermarket levers, burrito tube, skid plate, Sargent Cycle Seat... -2003 HD Sportster 100th Anniversary -1999 Buell X-1 Lightning - Race kit, Buell Seat
	0

09-21-2018, 05:17 PM	#7
cbrfxr67 Join Date: Jun 2018 Location: HOuston Posts: 357	glws that's a great $! __________________ BD125-15
	0

08-10-2018, 02:54 PM	#2
Chinabike Join Date: Jan 2018 Posts: 361	Thats a good deal.
	1

09-20-2018, 03:52 PM	#5
natti Join Date: Aug 2018 Posts: 5	Dang! This is looking nice! I’m over in Georgia, I’d consider meeting half way, you still modding these bikes? /still available?
	0

10-24-2018, 01:50 AM	#8
Dexxx702 Join Date: Oct 2018 Location: Las Vegas Posts: 3	Did that exhaust hook up whit no modification?
	0