RX3 Front Alxe ?

Rider2016 · 10-03-2020, 07:59 PM

Good day... What's the torq spec for the front axle nut on the rx3, can't find it any place. If not available, what the best method thats been used to not over tighten?

Thanks Much!

Working_ZS · 10-03-2020, 10:27 PM

I don't have an exact torque spec for you, but on my own I use 35-40 ft/lbs maximum on the front and rear axle nuts. They don't need a lot, especially the front, since the axle bolt gets clamped in place also.

Rider2016 · 10-04-2020, 05:30 AM

Thanks for the info =0)

10-03-2020, 07:59 PM	#1
Rider2016 Join Date: Jun 2016 Posts: 41	RX3 Front Alxe ? Good day... What's the torq spec for the front axle nut on the rx3, can't find it any place. If not available, what the best method thats been used to not over tighten? Thanks Much!
	0

10-03-2020, 10:27 PM	#2
Working_ZS Join Date: Aug 2016 Posts: 365	I don't have an exact torque spec for you, but on my own I use 35-40 ft/lbs maximum on the front and rear axle nuts. They don't need a lot, especially the front, since the axle bolt gets clamped in place also.
	0

10-04-2020, 05:30 AM	#3
Rider2016 Join Date: Jun 2016 Posts: 41	Thanks for the info =0)
	0