10-02-2017, 08:38 PM
|
#1 |
|
Join Date: May 2016
Location: Ohio
Posts: 154
|
HAWK Passenger Peg Replace w/ TT250's????
Hey guys, a while back I dropped the Hawk IN GRASS, mind you, and the passenger peg caught the ground weird and the "U Shape" metal piece, that holds that actual peg to the mount, gave out in the bends
 and once that metal bends it loses all structural integrity. It's beyond me why they just welded some bent metal to the mount instead of having it bolted on some way...  Anyways, I "Ghetto" rigged a cheap peg I bought online to the mount with some extra supports AND it works great for having my girlfriends foot just resting on it or when she mounts the bike.. BUT I am getting into doing some standing wheelies from the back pegs and am finding out that this cheap peg doesnt do well under that kind of pressure and is starting to bend. (Im getting to my point soon, dont worry) So, at first i tried to find if i could get a legit replacement part but had no luck. THEN someone on here introduced me to the TT250 parts list and I was amazed at the amount of parts and found myself going through most of all of them and came across its PASSENGER PEGs on the list for about $15. My question is; before I buy one (Or 2) is if anyone has both the HAWK and the TT250 and could tell me if the PASSENGER pegs could be swapped with no problem OR if someone could give me the measurements of their TT250's PASSENGER PEGs and I'll see if they match up The TT250's look shorter, but i dont think that will matter. What I am concerned with is if the points the mount attaches to the frame are the same distance apart as the HAWK's mount and frame TT250 Peg Link: http://www.cscmotorcycles.com/TT250-...p/zt19-103.htm Thanks Guys. Here are some PHOTOS: The Rig with measurements: More Measurements The Part That BROKE...: |
|
|
10-02-2017, 09:24 PM
|
#2 |
Join Date: Feb 2016
Location: NY
Posts: 172
|
I just measured mine for you, unfortunately it looks like the welded bracket is a little different, the bolts are about 3 and 1/8th inches center to center and the peg sits a little over 5 inches back (sorry for the bad pics I measured more precisely when I had two hands.
You still might be able to rig it somehow if its close, I would check that bolt center to center measurement again
__________________
2005 CBR600RR
2016 CSC TT250 Coming Soon |
|
|
|
10-02-2017, 09:39 PM
|
#3 | |
|
Join Date: May 2016
Location: Ohio
Posts: 154
|
Quote:
Hey Thanks for that measurement and photo, buddy! But damn it looks like the TT250's is spaced out more. As i just checked, the HAWK is 2 & 7/8 Center to Center 
|
|
|
|
|
10-02-2017, 09:41 PM
|
#4 |
Join Date: Apr 2017
Location: Omaha, NE
Posts: 7,984
|
The Tt250 is close, but there are a few differences. The rear peg flange pattern is one of them. There may be a member or two that removed their rear oegs like I did that would part woth them. I gave mine to another member that was missing his.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
10-02-2017, 09:50 PM
|
#5 | |
|
Join Date: May 2016
Location: Ohio
Posts: 154
|
Quote:
Hey, that would be amazing and very appreciated if ANYONE out there is willing to part with them, id buy them off you or pay the shipping cost. Or if anyone has any idea of where I could get a replacement. |
|
|
|
|
10-03-2017, 05:25 PM
|
#6 |
|
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,553
|
The passenger pegs on the Enforcer look like an exact match. Maybe one of the Enforcers guy's will verify the dimensions. Only problem there is where do you order the Enforcer parts from?
 I would just break out the mig welder and weld it back together.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
|
|
10-03-2017, 10:11 PM
|
#7 |
|
Join Date: Apr 2017
Location: Omaha, NE
Posts: 7,984
|
You can also contact txpowersoorts as they sell Hawk parts. I didn't see them on their parts page, but they may just not be listed and might be able to order them. Be prepared for potential sticker shock though. They ask a premium on Hawk parts.
Other than that, I agree with Jerry. That should be a pretty straight forward weld job. If you dont have a welder call someone local, it shouldnt cost too much to have it welded back up.
__________________
Hawk Information and Resource guide: http://www.chinariders.net/showthread.php?t=20331 2018 Hawk 250 - Full Mod list here. http://www.chinariders.net/showpost....62&postcount=1 2024 Royal Enfield Shotgun 650 https://chinariders.net/showthread.php?t=34124 |
|
|
|
10-03-2017, 11:30 PM
|
#8 |
Join Date: Feb 2016
Location: George West, Texas
Posts: 4,097
|
__________________
***************************************** 2015 Bashan"Blaze" BS250GY-31 (DB-07K-250) GONE 2017 Suzuki V Strom 650 XT "We are all born ignorant, but one must work hard to remain stupid." ~Benjamin Franklin~
|
|
|
|
10-04-2017, 09:33 PM
|
#9 | |
|
Join Date: May 2016
Location: Ohio
Posts: 154
|
Quote:
I wish i did have a welder but I will have to figure out how it should be welded as on of the peg's holes where the pin goes in also broke as well. |
|
|
|
|
10-09-2017, 02:15 AM
|
#10 |
|
Join Date: May 2016
Posts: 583
|
You can have mine, just pay shipping. I believe they will fit in a medium size flat rate box.
|
|
|
|
10-10-2017, 05:20 PM
|
#11 | |
|
Join Date: May 2016
Location: Ohio
Posts: 154
|
Quote:
That would be amazing! I just sent you a message about it. |
|
|
|
|
|
|
 |
|
|
Linear Mode
