It`s here - Page 3

glavey · 03-31-2019, 02:08 PM

Quote:

Originally Posted by Whisky

Had it out today for awhile... I did take it for a short spin, was surprised it started right up after sitting all winter...

I can almost remember what it was like to ride my bike.

Soon...

Whisky · 03-31-2019, 05:29 PM

Quote:

Originally Posted by glavey

I can almost remember what it was like to ride my bike.

Soon...

Yeah but yours will be way better then most and well worth the wait.

RedCrowRides · 04-01-2019, 07:33 AM

I got mine out for a bit Saturday and rode down to a new Enduro and Moto-X Park less than 5 miles from my house that just opened up .I didn't ride on any of it just sat and watched but it was fun and met some nice people ,unfortunately the Park doesn't have any flat area that could be used as a "stunt lot" , it's strictly all dirt even the parking area.

Put some engine dress up bits on ( blue anodized valve tappet covers) and some 1" riser 's for the bars to get them up a little bit and also took the "stick out" stock front turn signals off and replaced them with flush mount LED ones to match the ones i installed on the rear.,was afraid I'd have to order a new Flasher relay due to switching over to LED but they flashed fine so that was a plus.

On Sunday the temp here dropped 20 degrees tho and raining so that was the end of that lol ,I got a lot more stuff to put on sitting here but aint doin it in the cold and rain haha.

Whisky · 04-01-2019, 07:57 AM

I to have a bunch of parts waiting to be installed but I'm not gonna freeze my ass off doing it. It's been way below normal temp wise and it's been raining or snowing on my days off.

scoot newb · 06-02-2019, 12:02 AM

Did you start the swap yet?

Whisky · 06-03-2019, 06:41 AM

No. I was gonna do it a couple days ago but was
Being lazy. I'm pretty sure I have chatted a few times with u on the Zs190 forum, u have a blue bike, just did your swap not to long ago.

scoot newb · 06-03-2019, 09:43 AM

Quote:

Originally Posted by Whisky

No. I was gonna do it a couple days ago but was
Being lazy. I'm pretty sure I have chatted a few times with u on the Zs190 forum, u have a blue bike, just did your swap not to long ago.

Yes. We had that long exchange about the exhaust and will it fit. The exhaust still hasn't shipped and I ordered it Thursday evening. It seems this forum has died down.

scoot newb · 06-11-2019, 12:17 AM

Okay fam, you gotta start installing it now.

Whisky · 06-11-2019, 03:54 PM

Quote:

Originally Posted by scoot newb

Okay fam, you gotta start installing it now.

So how is your newly swapped beast running Is it all good?

scoot newb · 06-11-2019, 03:55 PM

Still gotta get some real mounts for the oil cooler and exhaust. It is, ah, rigged up for now.

scoot newb · 06-11-2019, 04:00 PM

Even when I had the stock pipe, and stock jetting, when I blasted it up and down the street, I would laugh while riding it. It was so fun and it felt like some type of secret.

Having a bigger motor on a little bike that people would confuse for a 50cc scooter.

Whisky · 06-11-2019, 04:34 PM

Its been raining about every day that I have off from work but beautiful, sunny warm on the days I work, go figure. I know I can swap that motor out in just a few hrs, I will get it done at some point. Did u get a different carb or u still using the one that came in kit?

scoot newb · 06-19-2019, 01:47 AM

I'm still using the carb that came with the kit but changed the jets to 38/125. It's a bit lean on WOT. Gonna try bumping it up to 130. Another member suggested using the coil that came on the kit before upping the main jet. They have different connector types so it looks like I'll have to wire in the connector from the harness that came with the kit.

PhildoScaggins · 06-19-2019, 07:48 AM

hey scoot, any chance you have a caliper to measure the filter for size on your zs190? My filter came torn. aside from that all I have to do is mount my exhaust and fiddle with the clutch.

scoot newb · 06-19-2019, 04:34 PM

I don't have a caliper but I have a tape measure. Will that work?

04-01-2019, 07:33 AM	#33
RedCrowRides Join Date: Jun 2018 Location: Florida Posts: 759	I got mine out for a bit Saturday and rode down to a new Enduro and Moto-X Park less than 5 miles from my house that just opened up .I didn't ride on any of it just sat and watched but it was fun and met some nice people ,unfortunately the Park doesn't have any flat area that could be used as a "stunt lot" , it's strictly all dirt even the parking area. Put some engine dress up bits on ( blue anodized valve tappet covers) and some 1" riser 's for the bars to get them up a little bit and also took the "stick out" stock front turn signals off and replaced them with flush mount LED ones to match the ones i installed on the rear.,was afraid I'd have to order a new Flasher relay due to switching over to LED but they flashed fine so that was a plus. On Sunday the temp here dropped 20 degrees tho and raining so that was the end of that lol ,I got a lot more stuff to put on sitting here but aint doin it in the cold and rain haha. __________________ 2001 Mustang GT 2004 Sportster 2018 VADER 2020 Orion RXB250L
	0

04-01-2019, 07:57 AM	#34
Whisky Join Date: Aug 2018 Posts: 286	I to have a bunch of parts waiting to be installed but I'm not gonna freeze my ass off doing it. It's been way below normal temp wise and it's been raining or snowing on my days off. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	1

06-03-2019, 06:41 AM	#36
Whisky Join Date: Aug 2018 Posts: 286	No. I was gonna do it a couple days ago but was Being lazy. I'm pretty sure I have chatted a few times with u on the Zs190 forum, u have a blue bike, just did your swap not to long ago. __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

06-11-2019, 04:34 PM	#42
Whisky Join Date: Aug 2018 Posts: 286	Its been raining about every day that I have off from work but beautiful, sunny warm on the days I work, go figure. I know I can swap that motor out in just a few hrs, I will get it done at some point. Did u get a different carb or u still using the one that came in kit? __________________ 2018 BD125-8-x21rs ZS190/Genuine PE28 Kepspeed GP1 Exhaust Protaper se x110 bars/grips 1/4 MotionPro throttle Kepspeed Braced swingarm Chimera rear hub assy Grom Intergrated tail light Superlite Sprockets 17/32 custom made from Japan Chimera Swing Arm Bolt RK MXZ Chain #420 All Balls wheel bearings Motodynamic fender eliminator Coremoto ss brake lines Composimo 2.5 lower link Grom Calipers-w/ebc pads/rotors Michelin tire 140&120 13x4/13x7 fatties Grom forks
	0

06-02-2019, 12:02 AM	#35
scoot newb Join Date: Sep 2018 Posts: 403	Did you start the swap yet?
	0

06-11-2019, 12:17 AM	#38
scoot newb Join Date: Sep 2018 Posts: 403	Okay fam, you gotta start installing it now.
	0

06-11-2019, 03:55 PM	#40
scoot newb Join Date: Sep 2018 Posts: 403	Still gotta get some real mounts for the oil cooler and exhaust. It is, ah, rigged up for now.
	0

06-11-2019, 04:00 PM	#41
scoot newb Join Date: Sep 2018 Posts: 403	Even when I had the stock pipe, and stock jetting, when I blasted it up and down the street, I would laugh while riding it. It was so fun and it felt like some type of secret. Having a bigger motor on a little bike that people would confuse for a 50cc scooter.
	0

06-19-2019, 01:47 AM	#43
scoot newb Join Date: Sep 2018 Posts: 403	I'm still using the carb that came with the kit but changed the jets to 38/125. It's a bit lean on WOT. Gonna try bumping it up to 130. Another member suggested using the coil that came on the kit before upping the main jet. They have different connector types so it looks like I'll have to wire in the connector from the harness that came with the kit.
	0

06-19-2019, 07:48 AM	#44
PhildoScaggins Join Date: Apr 2017 Location: Woods, Maine Posts: 247	hey scoot, any chance you have a caliper to measure the filter for size on your zs190? My filter came torn. aside from that all I have to do is mount my exhaust and fiddle with the clutch.
	0

06-19-2019, 04:34 PM	#45
scoot newb Join Date: Sep 2018 Posts: 403	I don't have a caliper but I have a tape measure. Will that work?
	0