Venom Z250 won’t start

Dustoff42 · 08-07-2022, 12:29 AM

Hey guys. I’m new to all this and had my bike for only a couple of weeks now. I started my bike today and let it run for a minute. Then killed it by turning the key. I came back literally ten minutes later and out my key in. It turn, the lights come on and I hear the fuel injector pump. But the key stops and it won’t let me start the bike. It’s like all of a sudden it just is broken. I had just put the side mirrors on and had to loosen the part where ya attack them where the clutch is attached but other than that nothing else was touched. And ideas? I’m lost on this one. Everything I find online is about the engine turning but this isn’t doing anything.

**JerryHawk250** · 08-07-2022, 01:08 AM

Is the kill switch off? You might of accidentally hit it. Also make sure you accidentally unplug the clutch safety switch wire.

Falkon45 · 08-07-2022, 01:44 AM

Wait ... Are you trying to turn the key to start the bike, or are you pressing the start switch after turning the key?

Dustoff42 · 08-07-2022, 02:04 AM

Quote:

Originally Posted by JerryHawk250

Is the kill switch off? You might of accidentally hit it. Also make sure you accidentally unplug the clutch safety switch wire.

Yes the kill switch is not on. I ran the bike a few times now and even right before. One of the metal tabs for the clutch switch is jiggly. That can’t be good can it?

Dustoff42 · 08-07-2022, 02:04 AM

Quote:

Originally Posted by Falkon45

Wait ... Are you trying to turn the key to start the bike, or are you pressing the start switch after turning the key?

Sorry I misspoke. I press the button to start it and nothing happens.

Dustoff42 · 08-07-2022, 02:33 AM

Thank you everyone that answered. Found the issues. The clutch switch had a screw loose and and made one of the connectors loose. Tightened and fixed.

08-07-2022, 12:29 AM	#1
Dustoff42 Join Date: Aug 2022 Posts: 38	Venom Z250 won’t start Hey guys. I’m new to all this and had my bike for only a couple of weeks now. I started my bike today and let it run for a minute. Then killed it by turning the key. I came back literally ten minutes later and out my key in. It turn, the lights come on and I hear the fuel injector pump. But the key stops and it won’t let me start the bike. It’s like all of a sudden it just is broken. I had just put the side mirrors on and had to loosen the part where ya attack them where the clutch is attached but other than that nothing else was touched. And ideas? I’m lost on this one. Everything I find online is about the engine turning but this isn’t doing anything.
	0

08-07-2022, 01:08 AM	#2
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,552	Is the kill switch off? You might of accidentally hit it. Also make sure you accidentally unplug the clutch safety switch wire. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

08-07-2022, 01:44 AM	#3
Falkon45 Join Date: Aug 2020 Location: Savannah, Ga Posts: 759	Wait ... Are you trying to turn the key to start the bike, or are you pressing the start switch after turning the key?
	0

08-07-2022, 02:33 AM	#6
Dustoff42 Join Date: Aug 2022 Posts: 38	Thank you everyone that answered. Found the issues. The clutch switch had a screw loose and and made one of the connectors loose. Tightened and fixed.
	3