07-15-2019, 05:38 AM | #1 |
Join Date: Jul 2019
Location: Nor cal
Posts: 3
|
Hi everyone. New hellcat 125 owner from nor cal
Hey new hellcat owner here. I've owned it for about a month and freaking love it. Did the usual mods so far. Tons of loctight, grom axles, drilled jets, bevelled the isolater to match the carb, opened stock pipe & airbox a bit, cut some of the rear fender and a bunch of stickers!
I just ordered a pz27 carb, 26mm intake/isolater, 17t front sprocket(stock 16t) and carbon muffler so it should be running real good soon.
__________________
Give me some tools and any bike to work on and I'll be good |
|
07-15-2019, 08:30 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,713
|
Welcome aboard! Nice looking bike. Bonus point for posting pics on 1st post.
__________________
2024 Linhai 300 ATV 4x4 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S (Sold) 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
07-15-2019, 08:59 AM | #3 |
Join Date: Mar 2019
Posts: 45
|
What bit sizes did you use to drill jets on pz25?
|
|
07-15-2019, 11:53 AM | #4 |
Join Date: Jun 2018
Location: Pocatello, Idaho
Posts: 794
|
Very nice, very nice!!! Thanks for the pictures and info!!! Welcome aboard here!!
__________________
A family that works together, plays together, shoots and trains together, and sleds together, stays together. Second amendment! SkiDoo sleds, NOW 2 TTR225, and a BMS250. A couple of quotes (we are not farmers) "I don't get off the farm much" "Am too old school" I call the china bikes "the china syndrome". |
|
07-15-2019, 07:58 PM | #5 |
Join Date: Jul 2019
Location: Nor cal
Posts: 3
|
@flhellcat:
I don't remember what drill bit size. I bought a tiny set from harbor freight and just went up 2 sizes from the one that fit inside the hole. I left the pilot alone (32) since it idles/starts with no choke. The main was 88 now it matches a 95 jet from another carb of mine. It was better but I really noticed some pick-up after drilling the airbox ALOT.
__________________
Give me some tools and any bike to work on and I'll be good |
|
07-15-2019, 08:11 PM | #6 |
Join Date: Jul 2019
Location: Nor cal
Posts: 3
|
When the new parts/later mods installed I will be posting step by step pics (in the mods section) for any new members that may have any questions about these bikes.
__________________
Give me some tools and any bike to work on and I'll be good |
|
07-15-2019, 09:18 PM | #7 |
Join Date: Mar 2019
Posts: 45
|
Thanks for the info.
When it gets a little cooler here, I'll start tinkering again. |
|
|
|
Tags |
125, grom clone, hellcat, mods, taotao |
|
|