need parts

kain9295 · 05-02-2017, 09:30 AM

where can i find parts for a 2007 tank sport 200cc 4 stroke. oem parts or aftermarket ? can you cross over this bike to another one to get parts easier ? any iformation would be helpful . thank you

Weldangrind · 05-02-2017, 12:32 PM

Before I move your thread to the appropriate section, what kind of machine are you riding? Is it a dirt bike, dual sport, street bike or quad? Once we establish that, we can begin to guide you. A picture would help a lot.

kain9295 · 05-03-2017, 09:56 PM

here picture of the dirtbike

Weldangrind · 05-04-2017, 12:09 PM

Ok, I moved the thread to the Pure Dirt forum for you.

That's a nice bike; the Gio in Canada was somewhat similar, with the CG-based engine and 19/16 wheels. It uses decent calipers front and rear, and they accept Honda-style pads.

Specifically, what parts are you looking for? The good news is that almost anything you need can be had for cheap on eBay.

kain9295 · 05-04-2017, 02:45 PM

I'm looking for a pz30 carb I will post a picture after work on what the carb looks like

**JerryHawk250** · 05-04-2017, 03:13 PM

Quote:

Originally Posted by kain9295

I'm looking for a pz30 carb I will post a picture after work on what the carb looks like

You can use a MIKUNI VM26 Carburetor as a replacement and order a set of main jets for tuning. $35.99 on Amazon. https://www.amazon.com/MIKUNI-VM26-C...9269D92RNEDSSH

humanbeing · 05-04-2017, 09:02 PM

Quote:

Originally Posted by kain9295

I'm looking for a pz30 carb ...

There's at least 2 type of PZ30: 100% Keihin jets compatible / Half-breed: Taiwanese brand Sheng wey

are infamous for can't get the right jet elsewhere...

kain9295 · 05-04-2017, 10:26 PM

this is my carb

humanbeing · 05-05-2017, 01:37 PM

Quote:

Originally Posted by kain9295

this is my carb

Good copies. Keihin used had shares in them http://www.dekni.com/images/lishibig.jpg (1994-2011 ) ... Repair kit/ different jets is way to saves it...
---
Tricks http://www.motorfans.com.cn/forum.ph...authorid=75082

05-02-2017, 09:30 AM	#1
kain9295 Join Date: May 2017 Location: california Posts: 21	need parts where can i find parts for a 2007 tank sport 200cc 4 stroke. oem parts or aftermarket ? can you cross over this bike to another one to get parts easier ? any iformation would be helpful . thank you
	0

05-02-2017, 12:32 PM	#2
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Before I move your thread to the appropriate section, what kind of machine are you riding? Is it a dirt bike, dual sport, street bike or quad? Once we establish that, we can begin to guide you. A picture would help a lot. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-04-2017, 12:09 PM	#4
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Ok, I moved the thread to the Pure Dirt forum for you. That's a nice bike; the Gio in Canada was somewhat similar, with the CG-based engine and 19/16 wheels. It uses decent calipers front and rear, and they accept Honda-style pads. Specifically, what parts are you looking for? The good news is that almost anything you need can be had for cheap on eBay. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

05-04-2017, 02:45 PM	#5
kain9295 Join Date: May 2017 Location: california Posts: 21	I'm looking for a pz30 carb I will post a picture after work on what the carb looks like
	0