Go Back   ChinaRiders Forums > Technical/Performance > Dual Sport/Enduro
Register FAQ Community Calendar Today's Posts Search
Reply
 
Thread Tools Search this Thread Display Modes
Old 10-09-2023, 09:14 AM   #1
Satan   Satan is offline
 
Join Date: Oct 2023
Posts: 9
tbr7 has 4th gear stuck on display?

So its kinda weird, it shows "4" on the gear display, for first gear, second gear, and fourth gear.

however, when in 3rd or 5th gear it shows a "9" on the display


the bike also doesnt start now unless i hold the clutch in (i presume because it thinks its in gear)



this happened after the chain popped on me when downshifting.


 
Reply With Quote
Old 10-09-2023, 09:18 AM   #2
JerryHawk250   JerryHawk250 is online now
Moderator
 
JerryHawk250's Avatar
 
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,552
Check for broken wires on gear selector switch which is near the front sprocket. The chain probably broke a few.
__________________
2023 Lifan Lycan 250 Chopper
2023 Venom Evader
2022 Lifan KPX250
2020 Kawasaki Vulcan S
2004 Honda ST 1300
2016 Black Hawk 250 (sold)
Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster
2016 Cazador180 XL
2014 Coolster150
JerryHawk250.com
My YouTube Channel


 
Reply With Quote
Old 10-09-2023, 03:15 PM   #3
Thumper   Thumper is online now
 
Thumper's Avatar
 
Join Date: Feb 2021
Location: Kansas City
Posts: 2,237
They are color coded, so you can repair without mystery. The connector is probably the typical 6 wire bus connector. Good luck.
__________________
-2022 5 speed Templar X Orange, OEM 51T rear sprocket, 14T front sprocket
-NOS 2020 KTM 250SX (2-stroke motocross), less than 10 hours on it


 
Reply With Quote
Old 10-12-2023, 08:14 PM   #4
Satan   Satan is offline
 
Join Date: Oct 2023
Posts: 9
Quote:
Originally Posted by JerryHawk250 View Post
Check for broken wires on gear selector switch which is near the front sprocket. The chain probably broke a few.


so upon checking today its completely fine in terms of the wires being broken. i unplugged the speedometer assembly and plugged it back in to no avail, it still always shows as 4th gear. the number 4 is permanently on. its weird


 
Reply With Quote
Old 10-12-2023, 08:16 PM   #5
Satan   Satan is offline
 
Join Date: Oct 2023
Posts: 9


so looking at this image, notice how "3" and "4" mixed together looks like 9. so i guess thats why it shows a 9 on the display when in third gear. hoping changing the speedometer fixes it cause i plan on doing that in the next week or two


 
Reply With Quote
Old 10-14-2023, 07:39 AM   #6
bogieboy   bogieboy is offline
 
bogieboy's Avatar
 
Join Date: May 2013
Location: finger lakes NY
Posts: 2,042
I would remove and check the inner terminals on the selector switch just to verify that its intact, and to make sure the part that it interfaces with on the motor is working as it should


 
Reply With Quote
Old 10-14-2023, 08:52 AM   #7
Satan   Satan is offline
 
Join Date: Oct 2023
Posts: 9
will do, if worse comes to worse, id imagine the hawk/tt250 gear indicator assembly fits on the tbr7? the best part about these bikes is how dirt cheap the parts are. something fails and i can just drop 20 bucks max on a new part


 
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:23 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.