|
02-12-2021, 09:20 AM | #1 |
Join Date: Aug 2009
Posts: 503
|
Sorry, I should have been more specific, I meant the threaded mounting holes for the caliper where it bolts to the axle carrier, and then compare with the ones VMC lists.
Did you compress the puck back into the caliper fully, to give the brake pads room to fit over the rotor? |
|
02-12-2021, 09:47 AM | #2 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,555
|
I've been through this already. I had to swap the mounting bracket from the old one to the new one.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
02-12-2021, 10:28 AM | #3 | |
Join Date: Feb 2021
Posts: 4
|
Quote:
What did you order yours for? Thanks in advance. |
|
|
02-12-2021, 01:05 PM | #4 |
Moderator
Join Date: Oct 2016
Location: Houma, La.
Posts: 11,555
|
My caliper was different than yours. I found a caliper that match what I had and swapped the brackets. This was on a Cazador 180 UTV.
__________________
2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel |
|
02-12-2021, 10:25 AM | #5 | |
Join Date: Feb 2021
Posts: 4
|
Quote:
I tried with the puck fully compressed in, and also tried to line up without pads installed. The calipers old/new were too different to even swap parts / brackets / pads to make something work. |
|
|
|
|
|
|