Baja DR 125 Rear Brake Bracket

DR125rider · 08-09-2020, 07:16 PM

Hi folks! I'm new to these forums, but I've had a Baja Dirtrunner 125 for years! Ride the hell out of it! However, today I ran into an issue.

The bracket that holds the rear brake sheared off - because cheap pot metal. Is this a pretty standard jellybean part or am I going to have to rig something up? If you would kindly point me in the right direction, I would greatly appreciate it!

I hope everybody is safe and healthy in these crazy crazy times!

Thanks in advance for your expertise!

dirtbkr188 · 08-10-2020, 12:19 PM

I'm assuming you are referring to part #2 in the diagram below. If so, the contact information for Baja is in the lower left corner.

DR125rider · 08-10-2020, 06:58 PM

That would be part 2! Thanks! Also, I thought Baja was long out of business due to bankruptcy and lawsuits from a number of recalls, no?

Bruces · 08-10-2020, 08:37 PM

Baja is probably no help to you but give them a try .I ordered and paid for a complete rear wheel assembly for the same bike as yours a long time ago ,like in 2008 or 9 or so ,and it still has not arrived lol .

dirtbkr188 · 08-11-2020, 10:21 AM

Bruces, you're right, I forgot about that.

DR125 rider, can you post up a few pics of the bracket you have, we might be able to locate a suitable replacement for it.

DR125rider · 08-15-2020, 08:57 PM

I should be able to get some pictures tomorrow. I just have to get it off the bike.

DR125rider · 08-16-2020, 01:25 PM

Here are the pictures as requested. What a pain!

dirtbkr188 · 08-16-2020, 07:08 PM

I don't see any attached images to your post...

DR125rider · 08-18-2020, 02:40 PM

Woops! I'm having some technical difficulties on my end with regards to uploading the photos. Sorry about that.

**JerryHawk250** · 08-18-2020, 02:49 PM

Quote:

Originally Posted by DR125rider

Woops! I'm having some technical difficulties on my end with regards to uploading the photos. Sorry about that.

It's not you. We are having issues with the website. Working on it.

DR125rider · 08-27-2020, 01:18 PM

Ah, I see. That is is unfortunate. Welp, I wish I could have found a source for the part, but ultimately, I decided to just take it to a machine shop and have them make one. It's gonna be a bit pricey, but at least it will be done. Only so many days left in the riding season out here in the Northeast. I've heard this bike is a Honda clone, so maybe a Honda part would work? I don't know. I don't have the patience to find out at this point! lol Thank you folkls for all the help and suggestions! I'm sure this wont be the last time I come to the forum for help and input!

franque · 08-27-2020, 02:20 PM

Just the motor really, sometimes the chassis depending on the bike, but there was only one Honda that came to the States with the CB/CG series of motors that had a rear disc, and this bike isn't a copy of that one.

08-09-2020, 07:16 PM	#1
DR125rider Join Date: Aug 2020 Posts: 6	Baja DR 125 Rear Brake Bracket Hi folks! I'm new to these forums, but I've had a Baja Dirtrunner 125 for years! Ride the hell out of it! However, today I ran into an issue. The bracket that holds the rear brake sheared off - because cheap pot metal. Is this a pretty standard jellybean part or am I going to have to rig something up? If you would kindly point me in the right direction, I would greatly appreciate it! I hope everybody is safe and healthy in these crazy crazy times! Thanks in advance for your expertise!
	0

08-10-2020, 12:19 PM	#2
dirtbkr188 Join Date: Aug 2009 Posts: 496	I'm assuming you are referring to part #2 in the diagram below. If so, the contact information for Baja is in the lower left corner.
	0

08-10-2020, 06:58 PM	#3
DR125rider Join Date: Aug 2020 Posts: 6	That would be part 2! Thanks! Also, I thought Baja was long out of business due to bankruptcy and lawsuits from a number of recalls, no?
	0

08-10-2020, 08:37 PM	#4
Bruces Join Date: May 2018 Posts: 1,572	Baja is probably no help to you but give them a try .I ordered and paid for a complete rear wheel assembly for the same bike as yours a long time ago ,like in 2008 or 9 or so ,and it still has not arrived lol .
	0

08-11-2020, 10:21 AM	#5
dirtbkr188 Join Date: Aug 2009 Posts: 496	Bruces, you're right, I forgot about that. DR125 rider, can you post up a few pics of the bracket you have, we might be able to locate a suitable replacement for it.
	0

08-15-2020, 08:57 PM	#6
DR125rider Join Date: Aug 2020 Posts: 6	I should be able to get some pictures tomorrow. I just have to get it off the bike.
	0

08-16-2020, 07:08 PM	#8
dirtbkr188 Join Date: Aug 2009 Posts: 496	I don't see any attached images to your post...
	1

08-18-2020, 02:40 PM	#9
DR125rider Join Date: Aug 2020 Posts: 6	Woops! I'm having some technical difficulties on my end with regards to uploading the photos. Sorry about that.
	0

08-27-2020, 01:18 PM	#11
DR125rider Join Date: Aug 2020 Posts: 6	Ah, I see. That is is unfortunate. Welp, I wish I could have found a source for the part, but ultimately, I decided to just take it to a machine shop and have them make one. It's gonna be a bit pricey, but at least it will be done. Only so many days left in the riding season out here in the Northeast. I've heard this bike is a Honda clone, so maybe a Honda part would work? I don't know. I don't have the patience to find out at this point! lol Thank you folkls for all the help and suggestions! I'm sure this wont be the last time I come to the forum for help and input!
	0

08-27-2020, 02:20 PM	#12
franque Join Date: Nov 2017 Location: Marseille, France -> Conakry, Guinea Posts: 1,481	Just the motor really, sometimes the chassis depending on the bike, but there was only one Honda that came to the States with the CB/CG series of motors that had a rear disc, and this bike isn't a copy of that one.
	0