License plate cracking

flopsweat · 07-06-2022, 03:13 PM

Has anyone else experienced their license plate cracking? Mine just started right around one of the bolts and I'm going to have to see if epoxy will help at all. I was thinking of putting a couple of rubber washers underneath the plate to cut down on the vibration, but wanted to ask you guys here in case someone has a better idea/insight.

Mudflap · 07-06-2022, 04:24 PM

Happens all the time on bikes that vibrate. I cut a piece of 1/8" Lexan the same size as the plate and bolt it to the back of the plate with 4 bolts. Sheet metal will also work.

**JerryHawk250** · 07-06-2022, 04:27 PM

Mine had cracked on my Ghost 250.

flopsweat · 07-06-2022, 04:40 PM

Yea I heard it was fairly common in buzzy dual sports. I guess really anything that dampens the amount of vibration could work, I just don't want to deal with the DMV again requesting a new one.

**JerryHawk250** · 07-06-2022, 04:58 PM

Quote:

Originally Posted by flopsweat

Yea I heard it was fairly common in buzzy dual sports. I guess really anything that dampens the amount of vibration could work, I just don't want to deal with the DMV again requesting a new one.

I covered the back up using double stick 3M tape and stuck a piece of aluminum to the back of it. still on there.

Thumper · 07-06-2022, 06:48 PM

wide flat washers can also stop it. Duct tape on the back, washer on the front should definitely stop it (easy fix)

flopsweat · 07-07-2022, 08:16 AM

Alright I figured it out, my original plastic plate cover cracked awhile ago, so I bought a silicone one that the plate snugs itself into. The silicone is about 1/8th" thick, so when I tightened it down, the holes were being pushed further back than the rest of the plate. I just put a few layers of duct tape on the back of the plate, cut two little rubber washers to size to fit the discrepancy, and should be good to go!

Bruces · 07-07-2022, 08:25 AM

Have any of you told your friends that your china bike is so powerful it broke the licence plate ?

**JerryHawk250** · 07-07-2022, 08:51 AM

Quote:

Originally Posted by Bruces

Have any of you told your friends that your china bike is so powerful it broke the licence plate ?

flopsweat · 07-07-2022, 02:18 PM

Quote:

Originally Posted by Bruces

Have any of you told your friends that your china bike is so powerful it broke the licence plate ?

Not yet, but I will. The sheer force of the massive G's I'm pulling just tries to rip the entire structure apart like a drag car.

07-06-2022, 03:13 PM	#1
flopsweat Join Date: Oct 2021 Location: The burbs of Chicago Posts: 235	License plate cracking Has anyone else experienced their license plate cracking? Mine just started right around one of the bolts and I'm going to have to see if epoxy will help at all. I was thinking of putting a couple of rubber washers underneath the plate to cut down on the vibration, but wanted to ask you guys here in case someone has a better idea/insight.
	0

07-06-2022, 04:27 PM	#3
JerryHawk250 Moderator Join Date: Oct 2016 Location: Houma, La. Posts: 11,554	Mine had cracked on my Ghost 250. __________________ 2023 Lifan Lycan 250 Chopper 2023 Venom Evader 2022 Lifan KPX250 2020 Kawasaki Vulcan S 2004 Honda ST 1300 2016 Black Hawk 250 (sold) Keihin PE30 carb,125 main,38 slow.Pod filter,ported & decked head 10:1 CR,Direct Ignition Coil,15/40Sprockets,NGK DPR8EIX-9,De-Cat,Dual Oil Cooler,Digital Cluster 2016 Cazador180 XL 2014 Coolster150 JerryHawk250.com My YouTube Channel
	0

07-06-2022, 04:24 PM	#2
Mudflap Join Date: Sep 2014 Posts: 1,870	Happens all the time on bikes that vibrate. I cut a piece of 1/8" Lexan the same size as the plate and bolt it to the back of the plate with 4 bolts. Sheet metal will also work.
	1

07-06-2022, 04:40 PM	#4
flopsweat Join Date: Oct 2021 Location: The burbs of Chicago Posts: 235	Yea I heard it was fairly common in buzzy dual sports. I guess really anything that dampens the amount of vibration could work, I just don't want to deal with the DMV again requesting a new one.
	0

07-06-2022, 06:48 PM	#6
Thumper Join Date: Feb 2021 Location: Kansas City Posts: 2,265	wide flat washers can also stop it. Duct tape on the back, washer on the front should definitely stop it (easy fix)
	1

07-07-2022, 08:16 AM	#7
flopsweat Join Date: Oct 2021 Location: The burbs of Chicago Posts: 235	Alright I figured it out, my original plastic plate cover cracked awhile ago, so I bought a silicone one that the plate snugs itself into. The silicone is about 1/8th" thick, so when I tightened it down, the holes were being pushed further back than the rest of the plate. I just put a few layers of duct tape on the back of the plate, cut two little rubber washers to size to fit the discrepancy, and should be good to go!
	0

07-07-2022, 08:25 AM	#8
Bruces Join Date: May 2018 Posts: 1,577	Have any of you told your friends that your china bike is so powerful it broke the licence plate ?
	4