Hawk clusters should be here this week...... - Page 2

hertz9753 · 06-18-2016, 09:58 PM

I have my seat and gas tank off right now.

jaymalmat · 06-18-2016, 10:03 PM

So its the blue/white that goes into stator case? Or wherever that one goes. I tried that wire but didnt get any response from tach on gauge

hertz9753 · 06-18-2016, 10:16 PM

It goes to the front of the bike, I think.

jaymalmat · 06-18-2016, 10:24 PM

Oh ok. Yeah you cant see it bc you have your front sprocket cover on but that wire combo runs into the stator case. Ill have to try again in the morning. Maybe just wire a flat male terminal to it. Appreciate the help and pics and I must say your bike is VERY clean.

hertz9753 · 06-18-2016, 11:20 PM

Here is a better picture. It does go down to the stator.

mjstef · 06-19-2016, 01:17 AM

Under the round rubber boot gentleman......

hertz9753 · 06-19-2016, 06:05 AM

If MacGyver would known it was simple snip and crimp of the blue and white wire...

Do you have any of those clusters left?

Jayman77 · 06-19-2016, 12:10 PM

Has anyone put one on a csc tt250 yet I would love it on mine

mjstef · 06-19-2016, 02:24 PM

Quote:

Originally Posted by hertz9753

If MacGyver would known it was simple snip and crimp of the blue and white wire...

Do you have any of those clusters left?

Have about 55 not spoken for yet.....

mjstef · 06-19-2016, 02:29 PM

Quote:

Originally Posted by Jayman77

Has anyone put one on a csc tt250 yet I would love it on mine

Working on that as i type this....

kohburn · 06-19-2016, 05:02 PM

pm sent for minor adjustment required of TT sensor.

kohburn · 06-19-2016, 05:04 PM

Quote:

Originally Posted by Jayman77

Has anyone put one on a csc tt250 yet I would love it on mine

successfully installed with minor adjustments to the fit test sensor.

Jayman77 · 06-19-2016, 05:09 PM

Quote:

Originally Posted by kohburn

successfully installed with minor adjustments to the fit test sensor.

pictures please have you cross checked with a gps to confirm

Jayman77 · 06-19-2016, 05:19 PM

The tt speedo is in mph but the odometer and trip is in klm the speedo is slow by 10%

That stuff don't bother me no tack is a problem

kohburn · 06-19-2016, 07:20 PM

06-19-2016, 06:05 AM	#22
hertz9753 Join Date: May 2016 Location: Bismarck, ND Posts: 868	If MacGyver would known it was simple snip and crimp of the blue and white wire... Do you have any of those clusters left? __________________ 2015 and 3/4 RPS Hawk 250. Most people would call it a 2016 but the MCO didn't.
	1

06-19-2016, 12:10 PM	#23
Jayman77 Join Date: Dec 2015 Location: coastal SC. Posts: 206	Has anyone put one on a csc tt250 yet I would love it on mine __________________ 2016 TT250 2014 NSS300 FORZA 2014 UN200 BURGMAN
	2

06-19-2016, 05:02 PM	#26
kohburn Join Date: Dec 2015 Location: Coastal NC Posts: 537	pm sent for minor adjustment required of TT sensor. __________________ -whatever you do, just be awesome. - 2008 Kawasaki Versys - 2016 CSC TT250
	0

06-19-2016, 05:19 PM	#29
Jayman77 Join Date: Dec 2015 Location: coastal SC. Posts: 206	The tt speedo is in mph but the odometer and trip is in klm the speedo is slow by 10% That stuff don't bother me no tack is a problem __________________ 2016 TT250 2014 NSS300 FORZA 2014 UN200 BURGMAN
	0

06-19-2016, 07:20 PM	#30
kohburn Join Date: Dec 2015 Location: Coastal NC Posts: 537	__________________ -whatever you do, just be awesome. - 2008 Kawasaki Versys - 2016 CSC TT250
	2

06-18-2016, 10:03 PM	#17
jaymalmat Join Date: Sep 2015 Location: Garland, Tx Posts: 65	So its the blue/white that goes into stator case? Or wherever that one goes. I tried that wire but didnt get any response from tach on gauge
	0

06-18-2016, 10:24 PM	#19
jaymalmat Join Date: Sep 2015 Location: Garland, Tx Posts: 65	Oh ok. Yeah you cant see it bc you have your front sprocket cover on but that wire combo runs into the stator case. Ill have to try again in the morning. Maybe just wire a flat male terminal to it. Appreciate the help and pics and I must say your bike is VERY clean.
	0