Getting parts From USA MOTORTOYS - Page 5

Weldangrind · 11-08-2010, 12:04 PM

Note that the seller said $60 OBO. I'd offer half.

SpudRider · 11-08-2010, 12:28 PM

Quote:

Originally Posted by Weldangrind

Note that the seller said $60 OBO. I'd offer half.

X2! The NX250 was imported into the United States for only three years; the seller doesn't have a big market for that item.

Spud

SpudRider · 11-08-2010, 12:30 PM

Kudos to Oengus and Allen; good sleuthing gentlemen!

As with the LXT 400, the Honda, NX250 engine also has a countershaft with 11 splines.

This is further evidence the bottom end of the LXT 400 engine might be patterned after the NX250 engine.

For LXT 400, countershaft sprocket information, check the following thread.

http://www.chinariders.net/modules.p...=109459#109459

Spud

katoranger · 11-08-2010, 04:11 PM

They don't call us chinariders for nothing. Takes a research team to keep these going.

SpudRider · 11-08-2010, 07:01 PM

Quote:

Originally Posted by katoranger

They don't call us chinariders for nothing. Takes a research team to keep these going.

X2!

Spud

daddy469 · 11-08-2010, 09:38 PM

Just got back from the peppermill. Balls, that certainly does look like the correct part! Other than the bolt depths it looks spot on! Thank you gentlemen, that is super sexy! I wonder if it is large enough for the stator... I suppose I could ask the seller a few questions....
Wifey is still pretty torqued about the whole situation since I had to ride in the lifan and she got zip. Plus it is a $2K paper weight. I would have to be 100% certain or it would be my balls for sure.... :?
This photo make a pretty compelling arguement tho...

Daddy 8)

Weldangrind · 11-09-2010, 01:43 AM

I hope you get it for a good price. If it doesn't fit, clean it up and re-eBay it.

Peppermill? :?:

katoranger · 11-09-2010, 09:26 AM

I think I would chance it. Make an offer.

FastDoc · 11-09-2010, 12:00 PM

I'd have had that sucker on the way already! It's gotta fit. How can all the visible parts be the same, and the Chinese make some expensive obscure change? Not their style. IF it fits you ride! PP ain't helpin' anytime soon...

If it does not I bet you can make it fit, or re-eBay it.

SpudRider · 11-09-2010, 12:18 PM

I agree with W&G, Allen, and FastDoc. Make the eBay seller an offer, and buy the part.

If PP has a single bike left unsold, they should be stripping it for parts for you, Fish, and the other LXT 400 buyers who will soon be in the same predicament. :( If, and when, Xingyue decides to ship parts to Utah, PP can install them on the "donor" bike, then sell it.

Spud

daddy469 · 11-09-2010, 11:45 PM

Alas - daddy is out of money :( It does look like it would pop right up tho. Perhaps I'll take it apart again for fun and look. Doesn't matter much tho, I've been told I'm without funds :?

Daddy 8)

FastDoc · 11-09-2010, 11:54 PM

Have you no first born you can sell?

TurboT · 12-01-2010, 02:10 AM

Sorry I haven't been as dilligent in the forums of late. Did this get resolved?

11-08-2010, 12:04 PM	#61
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	Note that the seller said $60 OBO. I'd offer half. __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-08-2010, 12:30 PM	#63
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	Kudos to Oengus and Allen; good sleuthing gentlemen! As with the LXT 400, the Honda, NX250 engine also has a countershaft with 11 splines. This is further evidence the bottom end of the LXT 400 engine might be patterned after the NX250 engine. For LXT 400, countershaft sprocket information, check the following thread. http://www.chinariders.net/modules.p...=109459#109459 Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-09-2010, 01:43 AM	#67
Weldangrind Join Date: Mar 2009 Location: Sardis, BC, Canada Posts: 25,977	I hope you get it for a good price. If it doesn't fit, clean it up and re-eBay it. Peppermill? :?: __________________ Weldangrind "I figure I'm well-prepared for coping with a bike that comes from the factory with unresolved issues and that rewards the self-reliant owner." - Buccaneer
	0

11-09-2010, 12:00 PM	#69
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	I'd have had that sucker on the way already! It's gotta fit. How can all the visible parts be the same, and the Chinese make some expensive obscure change? Not their style. IF it fits you ride! PP ain't helpin' anytime soon... If it does not I bet you can make it fit, or re-eBay it. __________________ Happy to serve.
	0

11-09-2010, 12:18 PM	#70
SpudRider Join Date: Jul 2008 Location: Idaho Posts: 25,054	I agree with W&G, Allen, and FastDoc. Make the eBay seller an offer, and buy the part. If PP has a single bike left unsold, they should be stripping it for parts for you, Fish, and the other LXT 400 buyers who will soon be in the same predicament. :( If, and when, Xingyue decides to ship parts to Utah, PP can install them on the "donor" bike, then sell it. Spud __________________ Spud "Never argue with an idiot. He will drag you down to his level, and beat you with experience." Mark Twain 2015 Zongshen ZS250GY-3 (RX3) 2006 Zongshen ZS200GY-2 (Sierra 200) 2005 Honda XR650L 2004 Honda CRF250X 1998 Kawasaki KDX220 Mods made to my Zongshen ZS200GY-2: http://www.chinariders.net/showthread.php?t=6894
	0

11-08-2010, 04:11 PM	#64
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	They don't call us chinariders for nothing. Takes a research team to keep these going.
	0

11-08-2010, 09:38 PM	#66
daddy469 Join Date: Jun 2008 Posts: 293	Just got back from the peppermill. Balls, that certainly does look like the correct part! Other than the bolt depths it looks spot on! Thank you gentlemen, that is super sexy! I wonder if it is large enough for the stator... I suppose I could ask the seller a few questions.... Wifey is still pretty torqued about the whole situation since I had to ride in the lifan and she got zip. Plus it is a $2K paper weight. I would have to be 100% certain or it would be my balls for sure.... :? This photo make a pretty compelling arguement tho... Daddy 8)
	0

11-09-2010, 09:26 AM	#68
katoranger Join Date: May 2007 Location: Altamont, Kansas Posts: 15,103	I think I would chance it. Make an offer.
	0

11-09-2010, 11:45 PM	#71
daddy469 Join Date: Jun 2008 Posts: 293	Alas - daddy is out of money :( It does look like it would pop right up tho. Perhaps I'll take it apart again for fun and look. Doesn't matter much tho, I've been told I'm without funds :? Daddy 8)
	0

11-09-2010, 11:54 PM	#72
FastDoc Join Date: Mar 2009 Location: Southeastern Washington desert Posts: 14,761	Have you no first born you can sell? __________________ Happy to serve.
	0

12-01-2010, 02:10 AM	#73
TurboT Join Date: Sep 2008 Location: Surrey, B.C., Canada Posts: 2,185	Sorry I haven't been as dilligent in the forums of late. Did this get resolved?
	0