Just bought a carbd hawk 250 help

[N7sithis]

Originally Posted by Megadan

If your are going by the stock speedometer, your bike realistically did about 60mph.

All of my speeds are via a GPS reading for that very reason.

Most people find the stock speedo to be 8 - 10% off at 60+mph

I have the TT250 Tach/speedo, not sure if it's anymore accurate than the stock though lol

This one;
https://cscmotorcycles.com/zt3-107a-...2018-up-tt250/

[Megadan]

Originally Posted by N7sithis

I have the TT250 Tach/speedo, not sure if it's anymore accurate than the stock though lol

This one;
https://cscmotorcycles.com/zt3-107a-...2018-up-tt250/

Likely not that accurate out of the box. Only way to know would be to compare it to a gps

[Desuboi941]

Originally Posted by N7sithis

I love my carbed 250, I weigh 300lbs and got it to 65 on a flat road BEFORE doing the sprockets and chain. Just a carb, air filter and exhaust put it there. Haven't tested top speed now that I have 17/45, 428 and an oil cooler, but I imagine it'll be higher lol

All that being said, ffor what you want and what you have, you'd be better off getting a different bike. Hawk is great for offroad/trails, getting around town, not great for the highway, especially for longer rides.

At the very least if you insist on the hawk carbed go ahead and pick up an oil cooler if you plan on redlining her to do highway speeds.

Already planning on getting an oil cooler, but again… not really planning on going on the highway, our roads speed limits are 45 and everyone goes 60 I just wanna make sure we’ll both be able to be safe out there (which I believe we will even if it’s stock.)

[N7sithis]

Originally Posted by Desuboi941

Already planning on getting an oil cooler, but again… not really planning on going on the highway, our roads speed limits are 45 and everyone goes 60 I just wanna make sure we’ll both be able to be safe out there (which I believe we will even if it’s stock.)

Well you said "won't die on on the highway" lol. You might not die, but you're gonna feel like you might. There's no power left in it to get out of the way when you need to at highway speeds.
Also as a main/only mode of transportation it is not comfortable for long rides - there are ways to make it more comfortable obviously, but it's no cruiser.

I've turned mine into a bike capable of highway transport and it's decently comfortable after a new seat, seat pad/cushion, windshield, anti vibration grips, etc but after you get it ready for all that you've spent hundreds more lol.
Looking back if I have 2500 cash might have gone a different route, got something capable of hitting 80 lol

But I'm poor, got approved for 1500 through amazon and didn't look back.

Personally, after seeing how these things come stock I wouldn't feel safe on it straight outta the box....you need to go over a lot of stuff, every bolt, brakes, all cables, make sure all lights work, CHECK THAT CHAIN! etc, etc.

My bike arrived missing the front axle nut, the rear brake light was not adjusted properly so it never came on when touching the brakes (until I adjusted it)
Had a short in the start/kill switch, the chain was also incredibly loose on mine and simply fell off one day. Luckily got it back on and babied it home.
The stock rear brake setup is held together by a pin, which fell out while riding on me and I lost rear brakes. I drilled a bigger hole there, put a nut, bolt, washer, lock washer and blue loctite on it and fixed it.

I've also heard people getting it with the chain too tight, which can lead to snapping that thing.

It's "safe" after all the kinks are worked out.

The road I live off is also 45 and everyone does 60. After plenty of mods it's fine for that, but stock I think 45-48 was my top speed before the break in lol

[Desuboi941]

Just bought some retells t6 5w-40 is that good for the hawk?

[Bill Hilly]

Originally Posted by Desuboi941

Just bought some retells t6 5w-40 is that good for the hawk?

No, It's not . It's too thin for Florida, and it's synthetic. Break in the motor with regular old non synthetic (Dino oil).. If you can return the T6 , or exchange it , get T4 15-40, or some regular non synthetic motorcycle oil 10-40, or 15-40

[Desuboi941]

Originally Posted by Bill Hilly

No, It's not . It's too thin for Florida, and it's synthetic. Break in the motor with regular old non synthetic (Dino oil).. If you can return the T6 , or exchange it , get T4 15-40, or some regular non synthetic motorcycle oil 10-40, or 15-40

Thank you, will do!

[Megadan]

Originally Posted by Bill Hilly

No, It's not . It's too thin for Florida, and it's synthetic. Break in the motor with regular old non synthetic (Dino oil).. If you can return the T6 , or exchange it , get T4 15-40, or some regular non synthetic motorcycle oil 10-40, or 15-40

T6 also comes in 15w-40. It's what I run in my Hawk, and have since the 200 mile mark when I did the first oil change.

[Bill Hilly]

Originally Posted by Megadan

T6 also comes in 15w-40. It's what I run in my Hawk, and have since the 200 mile mark when I did the first oil change.

I have some T6 15w40 on hand, but haven't got around to using it yet, because I bought 2 gallons of Quicksilver brand full synthetic a good while back on sale from Amazon. I run synthetic in my bikes, except for the Hawk, because I was under the impression that you were supposed to break in a motor with Dino oil. I think some claim it helps the rings to seat better, but I just do it because of what I have seen on online. My Hawk is about due for an oil change , and I will probably just run what T-4 I have left in it, and then switch it to full synthetic. I have also ran the Walmart Super Tech full synthetic motorcycle oil in my Brozz, and my Virago , but I have never seen it in gallons.

[Megadan]

Originally Posted by Bill Hilly

I have some T6 15w40 on hand, but haven't got around to using it yet, because I bought 2 gallons of Quicksilver brand full synthetic a good while back on sale from Amazon. I run synthetic in my bikes, except for the Hawk, because I was under the impression that you were supposed to break in a motor with Dino oil. I think some claim it helps the rings to seat better, but I just do it because of what I have seen on online. My Hawk is about due for an oil change , and I will probably just run what T-4 I have left in it, and then switch it to full synthetic. I have also ran the Walmart Super Tech full synthetic motorcycle oil in my Brozz, and my Virago , but I have never seen it in gallons.

First 200 miles were done with T4 and a ZDDP additive. After that I switched to T6. It hasn't been an issue.

[Desuboi941]

Originally Posted by Bill Hilly

No, It's not . It's too thin for Florida, and it's synthetic. Break in the motor with regular old non synthetic (Dino oil).. If you can return the T6 , or exchange it , get T4 15-40, or some regular non synthetic motorcycle oil 10-40, or 15-40

I ended up getting stp pro formula sae 10w-40. I do have a receipt and can return this and just buy t4 on Amazon haha but let me know! Ik it prolly doesn’t make a difference but I’m wanting to know the difference except it comes out of the ground from places like Texas and the Middle East